Ryobi HD1830 manual Table of Contents, Introduction

Page 2

 

TABLE OF CONTENTS

 

Introduction

2

General Safety Rules

3-4

Specific Safety Rules

4

Important Safety Instructions for Charger

5

Symbols

6

Specifications

7

Unpacking

7

Applications

7

Features

8-9

Adjustments

10-12

Operation

13-17

Maintenance

18-19

Parts Ordering / Service

20

 

INTRODUCTION

 

This cordless hammer drill has many features for making the use of this product more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

WARNING:

Do not attempt to use this product until you thoroughly read and completely understand the operator’s manual. Pay close attention to the safety rules, including Dan- gers, Warnings, and Cautions. If you use your product properly and only as intended, you will enjoy years of safe, reliable service.

WARNING:

The operation of any drill can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

Page 2

Image 2
Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaImportant Rules for Battery Tools Specific Safety RulesService Additional Rules for Safe OperationImportant Safety Instructions for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONApplications SpecificationsUnpacking InstructionsDepth Gauge ROD FeaturesAuxiliary Handle Assembly Switch Trigger BIT Storage Area Battery Pack Adjusting the Depth Gauge ROD AdjustmentsAdjusting the Auxiliary Handle Assembly Adjusting the Torque Removing Bits Changing the BIT RotationInserting Bits WrongTo Charge OperationCharging Your DRILL-DRIVER LED Function of ChargerTurning ON/OFF the Hammer Drill ReversibleThree Speed Gear Train BIT Storage To Install Battery PackTo Remove Battery Pack Electric BrakeDrilling Tightening the Chuck MaintenanceRemoving the Chuck Batteries Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling Service Model NO. and Serial no