Ryobi TS1301 Miter Lock Handle, Spindle Lock Button, Trigger Lock, Positive Stops on Miter Table

Page 10

FEATURES

MITER LOCK HANDLE

See Figure 3.

The miter lock handle securely locks your saw at desired miter angles.

SPINDLE LOCK BUTTON

See Figure 4.

A spindle lock button has been provided for locking the spindle of your saw in a stationary position. Depress and hold the spindle lock button while installing, changing, or removing blade.

TRIGGER LOCK

See Figure 5.

To prevent unauthorized use of your miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock through the hole in the switch trigger. A lock with a shackle between 1/4 in. (6.4 mm) and 19/64 in. (7.5 mm) diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.

POSITIVE STOPS ON MITER TABLE

Positive stops have been provided at 0° , 15° , 22-1/2° , 30° , and 45° . The 15° , 22-1/2° , 30° , and 45° positive stops have been provided on both the left and right side of the miter table.

ELECTRIC BRAKE

An electric brake has been provided to quickly stop blade rotation after the switch is released.

FENCE

The fence on your miter saw has been provided as a support to hold your workpiece securely against when making all cuts.

SELF-RETRACTING LOWER BLADE GUARD

The lower blade guard is made of shock-resistant, see- through plastic that provides protection from each side of the blade. It retracts over the upper blade guard as the saw is lowered into the workpiece.

CARRYING

HANDLE

SAW

LOCK ARM PIN

 

MITER LOCK

SAW ARM

HANDLE

Fig. 3

LOCKED IN DOWN POSITION

SWITCH

SPINDLE LOCKTRIGGER

BUTTON

Fig. 4

SWITCH

TRIGGER

PADLOCK

Fig. 5

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Miter SAWTable of Contents Rules for Safe Operation Symbol Meaning Safety Alert SymbolDouble Insulation Read ALL Instructions Before Making a CUT, be Sure ALL Adjustments are Secure Additional Rules For Safe Operation For Miter Saws Glossary of Terms for Woodworking Unpacking and Checking Contents Features Trigger Lock Miter Lock HandleSpindle Lock Button Positive Stops on Miter TableElectrical Connection Optional AccessoriesMounting Hole Trace HolesTo Install Blade AssemblyDust Guide Dust BAG Table Extensions Stop BlockPivot Adjustments Travel Pivot Adjustment AdjustmentsAuthorized Service Center Fence Miter Table Squaring the Miter Table to the FenceSee Figures 17 FEN CESee Figures 21 FENCE, Adjustments are Required FigSquaring the SAW Blade to the Fence Fence Miter Blade Framinglock Plate SquareCutting with Your Miter SAW OperationApplications CrosscuttingSupport Long Workpieces Long Workpiece Workpiece SupportsSee Figures 27 Cutting Warped MaterialClamping Wide Workpieces RightLubrication MaintenanceGeneral Extension CordsProceed as follows when replacement is required Brush ReplacementBrush CAP Assembly Troubleshooting Problem Cause SolutionOperators Manual 10 in mm Miter Saw Model TS1301 Ryobi TECHNOLOGIES, INC
Top Page Image Contents