Ryobi TS1300 warranty Mounting Holes, Optional Accessories, Electrical Connection

Page 11

FEATURES

MOUNTING HOLES

See Figure 6.

Your miter saw should be mounted to a firm supporting surface such as workbench. Four bolt holes have been provided in the saw base for this purpose. Each of the four mounting holes should be bolted securely using 3/8 in. (10

mm)machine bolts, lock washers, and hex nuts (not included). Bolts should be of sufficient length to accommodate the saw base, lock washers, hex nuts, and the thickness of the workbench.

Tighten all four bolts securely.

The hole pattern, shown in figure 6, is for an 18 in. (457 mm) x 24 in. (610 mm) workbench. Carefully check the workbench after mounting to make sure that no movement can occur during use. If any tipping, sliding, or walking is noted, secure the workbench to the floor before operating.

OPTIONAL ACCESSORIES

Optional accessories, provided on some models, are avail- able for use with your saw. They include table extensions, a stop block, work clamp, and dust bag.

Table extensions increase the work surface to 36 in. wide, providing support for cutting long workpieces.

The stop block provides a stop for making repetitive cuts to same length. It can be installed on either side of saw base.

The work clamp provides a means for clamping workpiece securely against the fence when making a cut. Standard "C" clamps can also be used for this purpose.

The dust bag catches sawdust, helping keep work area cleaner.

These accessories are also available from your Ryobi dealer. For the location of a distributor near you, call 1-800-525- 2579 in the United States or 1-800-265-6778 in Canada.

ELECTRICAL CONNECTION

Your saw has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double-check the power supply.

WARNING:

The operation of any saw can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before starting power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend wide vision safety mask for use over eyeglasses or standard safety glasses with side shields.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alter- ation or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

77--1/8"1/8”

99--7/8"7/8”

3-3/8”

 

3-3/8"

 

4-41/8"-1/8”

18”

18"

9-93/4"-3/4”

7/16"/ ” DIAIA.. HOLE

4-41/8"-1/8”

33--3/4"3/”16--1/2"/2”

24"”

Fig. 6

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Thank YOU for Buying a Ryobi Miter SAW Save this Manual for Future ReferenceTable of Contents Double Insulation Symbol Meaning Safety Alert SymbolRules for Safe Operation Read ALL Instructions Before Making a CUT, be Sure ALL Adjustments are Secure Additional Rules For Safe Operation For Miter Saws Glossary of Terms for Woodworking Product SpecificationsUnpacking and Checking Contents Cutting Capacities FeaturesKnow Your Miter SAW AMP MotorTrigger Lock Miter Lock HandleLOCK-OFF Lever Spindle Lock ButtonElectrical Connection Optional AccessoriesMounting Holes Dust Guide AssemblyTo Install Blade Double D Flats Blade Dust BAG Optional AdjustmentsBlade Slot Squaring the Miter Table to the FenceFence Miter Table Blade Slot Framing SquareHead Screws Mounting Bracket Miter Squaring the SAW Blade to the FenceBlade Miter Framing Square Mm SocketDepth Stop Pivot Adjustments Travel Pivot AdjustmentDepth Stop Adjustments OperationStraight Crosscut Cutting with Your Miter SAWCrosscutting Workpiece Supports Support Long WorkpiecesLong Workpiece Clamp Cutting Warped MaterialClamping Wide Workpieces Right Wrong Wide BoardExtension Cords MaintenanceGeneral LubricationBrush CAP Brush Assembly Brush ReplacementProceed as follows when replacement is required Problem Cause Solution TroubleshootingFigure a Key Part Number Description Quan Figure a Parts ListFigure B Figure B Parts List Ryobi Technologies INC Operators Manual 10 in mm Miter Saw Model TS1300

TS1300 specifications

The Ryobi TS1300 is a standout tool in the landscape of portable table saws, catering to both professionals and DIY enthusiasts alike. This compact saw has gained recognition for its impressive blend of performance, convenience, and versatility, making it a popular choice for various woodworking tasks.

One of the main features of the TS1300 is its powerful 15-amp motor, delivering a robust performance capable of handling tough materials. This motor allows the saw to achieve a no-load speed of up to 5,000 RPM, enabling smooth and precise cuts. The saw is designed to handle both rip cuts and cross cuts, making it ideal for a range of applications, from crafting complex furniture to simple home repairs.

In terms of cutting capacity, the Ryobi TS1300 offers an impressive maximum rip capacity of 30 inches, allowing users to work on larger panels effortlessly. Its adjustable blade height and angle further enhance the tool’s versatility, providing a cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. This adaptability is essential for craftsmen working on intricate projects requiring various angles and depths.

Moreover, the TS1300 is equipped with an innovative onboard storage system that keeps the accessories organized and readily available. This feature is particularly beneficial for users who need to quickly access their tools while working on different tasks, boosting overall efficiency.

Safety is also a key consideration with the Ryobi TS1300. The saw includes a blade guard and anti-kickback pawls to help minimize the risk of accidents during operation. The built-in push stick enhances user safety by allowing for safe maneuvering of materials without the risk of hand injury.

The lightweight and portable design of the TS1300 makes it easy to transport, making it a great option for job sites and home projects. Its folding stand provides stability while allowing for quick setup and teardown, enhancing user convenience.

In summary, the Ryobi TS1300 combines power, precision, and portability in a user-friendly package. Its range of features, from the powerful motor to the safety enhancements and mobility, positions it as a reliable choice for those looking to tackle woodworking projects with confidence and ease. Whether for professional use or home improvement tasks, the TS1300 delivers the performance and functionality required to achieve high-quality results.
Top Page Image Contents