Ryobi TS1300 warranty Double D Flats Blade

Page 13

ASSEMBLY

■Unplug your saw.

WARNING:

Failure to unplug your saw could result in accidental starting causing possible serious personal injury.

■Push down on the saw arm and pull out the lock pin to release saw arm. Raise saw arm to its full raised posi- tion. Be cautious, saw arm is spring loaded to raise.

■Loosen the phillips screw on the blade bolt cover until blade bolt cover can be raised. See Figure 11.

■Gently raise the lower blade guard bracket, releasing lower blade guard from notch so that it can be rotated up. See Figure 10.

■Rotate the lower blade guard and blade bolt cover up and back to expose the blade bolt.

■Depress the spindle lock button and rotate the blade bolt until the spindle locks. See Figure 12.

■Using the blade wrench provided, loosen and remove the blade bolt.

NOTE: The blade bolt has left hand threads. Turn blade bolt clockwise to loosen.

■Remove outer blade washer. Do not remove inner blade washer.

■Wipe a drop of oil onto inner blade washer and outer blade washer where they contact the blade.

WARNING:

If inner blade washer has been removed, replace it before placing blade on spindle. Failure to do so could cause an accident since blade will not tighten properly.

■Fit saw blade inside lower blade guard and onto spindle. The blade teeth point downward at the front of saw as shown in figure 11.

CAUTION:

Always install the blade with the blade teeth and the arrow printed on the side of the blade pointing down at the front of the saw. The direction of blade rotation is also stamped with an arrow on the upper blade guard.

■Replace outer blade washer. The double "D" flats on the blade washers align with the flats on the spindle.

■Depress spindle lock button and replace blade bolt.

NOTE: The blade bolt has left hand threads. Turn blade bolt counterclockwise to tighten.

■Tighten blade bolt securely.

■Remove the blade wrench and store it in a safe place for future use.

LOWER

BLADE GUARD

NOTCH

LOWER BLADE

GUARD BRACKET

LOWER

BLADE GUARD

PHILLIPS

SCREW

BLADE

BOLT COVER

R

O

N

T

T

O

A

I

I

O

T

N

A

T

 

O

 

R

 

TO

LOOSEN TO

TIGHTEN

BLADE BOLT

SPINDLE

LOCK

BUTTON

R

O

T

A

T

I

O

N

Fig. 10

FLAT (S)

ON SPINDLE

INNER BLADE WASHER WITH

DOUBLE "D" FLATS

BLADE

OUTER BLADE WASHER WITH DOUBLE "D" FLATS

Fig. 11

Fig. 12

Page 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Thank YOU for Buying a Ryobi Miter SAW Save this Manual for Future ReferenceTable of Contents Rules for Safe Operation Symbol Meaning Safety Alert SymbolDouble Insulation Read ALL Instructions Before Making a CUT, be Sure ALL Adjustments are Secure Additional Rules For Safe Operation For Miter Saws Glossary of Terms for Woodworking Product SpecificationsUnpacking and Checking Contents Know Your Miter SAW FeaturesAMP Motor Cutting CapacitiesLOCK-OFF Lever Miter Lock HandleSpindle Lock Button Trigger LockMounting Holes Optional AccessoriesElectrical Connection To Install Blade AssemblyDust Guide Double D Flats Blade Dust BAG Optional AdjustmentsFence Miter Table Squaring the Miter Table to the FenceBlade Slot Framing Square Blade SlotBlade Miter Framing Square Squaring the SAW Blade to the FenceMm Socket Head Screws Mounting Bracket MiterDepth Stop Adjustments Pivot Adjustments Travel Pivot AdjustmentOperation Depth StopCrosscutting Cutting with Your Miter SAWStraight Crosscut Long Workpiece Support Long WorkpiecesWorkpiece Supports Clamping Wide Workpieces Cutting Warped MaterialRight Wrong Wide Board ClampGeneral MaintenanceLubrication Extension CordsProceed as follows when replacement is required Brush ReplacementBrush CAP Brush Assembly Problem Cause Solution TroubleshootingFigure a Key Part Number Description Quan Figure a Parts ListFigure B Figure B Parts List Ryobi Technologies INC Operators Manual 10 in mm Miter Saw Model TS1300

TS1300 specifications

The Ryobi TS1300 is a standout tool in the landscape of portable table saws, catering to both professionals and DIY enthusiasts alike. This compact saw has gained recognition for its impressive blend of performance, convenience, and versatility, making it a popular choice for various woodworking tasks.

One of the main features of the TS1300 is its powerful 15-amp motor, delivering a robust performance capable of handling tough materials. This motor allows the saw to achieve a no-load speed of up to 5,000 RPM, enabling smooth and precise cuts. The saw is designed to handle both rip cuts and cross cuts, making it ideal for a range of applications, from crafting complex furniture to simple home repairs.

In terms of cutting capacity, the Ryobi TS1300 offers an impressive maximum rip capacity of 30 inches, allowing users to work on larger panels effortlessly. Its adjustable blade height and angle further enhance the tool’s versatility, providing a cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. This adaptability is essential for craftsmen working on intricate projects requiring various angles and depths.

Moreover, the TS1300 is equipped with an innovative onboard storage system that keeps the accessories organized and readily available. This feature is particularly beneficial for users who need to quickly access their tools while working on different tasks, boosting overall efficiency.

Safety is also a key consideration with the Ryobi TS1300. The saw includes a blade guard and anti-kickback pawls to help minimize the risk of accidents during operation. The built-in push stick enhances user safety by allowing for safe maneuvering of materials without the risk of hand injury.

The lightweight and portable design of the TS1300 makes it easy to transport, making it a great option for job sites and home projects. Its folding stand provides stability while allowing for quick setup and teardown, enhancing user convenience.

In summary, the Ryobi TS1300 combines power, precision, and portability in a user-friendly package. Its range of features, from the powerful motor to the safety enhancements and mobility, positions it as a reliable choice for those looking to tackle woodworking projects with confidence and ease. Whether for professional use or home improvement tasks, the TS1300 delivers the performance and functionality required to achieve high-quality results.
Top Page Image Contents