Ryobi TS1300 warranty Assembly, Dust Guide, To Install Blade

Page 12

ASSEMBLY

WARNING:

To prevent accidental starting that could cause possible serious personal injury, assemble all parts, make sure all adjustments are complete, and make sure all fasteners are secure before connecting saw to power supply. Saw should never be connected to power supply when you are assembling parts, making adjustments, installing or re- moving blades, or when not in use.

As mentioned previously your saw has been factory as- sembled and adjusted. The miter lock handle, work clamp, dust guide or dust bag, table extensions, stop block, and blade are the only parts that have to be installed.

MITER LOCK HANDLE

See Figure 7.

To install the miter lock handle, place the threaded stud on the end of the miter lock handle into the threaded hole in the control arm under miter table. Turn clockwise to tighten.

WORK CLAMP (Optional)

See Figure 8.

To install optional work clamp, part number 982021-001, place the shaft of the clamp in either hole in front of the miter table base. Thread the 8 mm work clamp screw provided into the side of the base and tighten it to secure the clamp in position. Rotate the knob on the clamp to move it in or out as needed.

WARNING:

When using the work clamp with the stop block, install the clamp on the stop block side of the blade. This will eliminate the possibility of the saw catching the loose end and kicking up. Failure to heed this warning can result in serious personal injury.

15

TO

0

LOOSEN

15

30

45

TO

TIGHTEN

CONTROL

MITER

ARM

TABLE

 

MITER

LOCK HANDLE

Fig. 7

45

30

15

0

15

0

 

WORK CLAMP

8 mm WORK

MITER

TABLE BASE

CLAMP SCREW

Fig. 8

DUST GUIDE

See Figure 9.

To install the dust guide, place the end marked INSERT over the exhaust port in the upper blade guard. Turn the guide so that the open end is facing down.

TO INSTALL BLADE

See Figures 10, 11, and 12.

WARNING:

A 10 in. (254 mm) blade is the maximum blade capacity of your saw. Never use a blade that is too thick to allow outer blade washer to engage with the flats on the spindle. Larger blades will come in contact with the blade guards, while thicker blades will prevent the blade bolt from securing the blade on the spindle. Either of these situa- tions could result in a serious accident and can cause serious personal injury.

UPPER

DUST GUIDE

 

BLADE GUARD

 

EXHAUST

PORT

15

0

15

30

45

Fig. 9

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Miter SAWTable of Contents Symbol Meaning Safety Alert Symbol Rules for Safe OperationDouble Insulation Read ALL Instructions Before Making a CUT, be Sure ALL Adjustments are Secure Additional Rules For Safe Operation For Miter Saws Product Specifications Glossary of Terms for WoodworkingUnpacking and Checking Contents Features Know Your Miter SAWAMP Motor Cutting CapacitiesMiter Lock Handle LOCK-OFF LeverSpindle Lock Button Trigger LockOptional Accessories Mounting HolesElectrical Connection Assembly To Install BladeDust Guide Double D Flats Blade Adjustments Dust BAG OptionalSquaring the Miter Table to the Fence Fence Miter TableBlade Slot Framing Square Blade SlotSquaring the SAW Blade to the Fence Blade Miter Framing SquareMm Socket Head Screws Mounting Bracket MiterPivot Adjustments Travel Pivot Adjustment Depth Stop AdjustmentsOperation Depth StopCutting with Your Miter SAW CrosscuttingStraight Crosscut Support Long Workpieces Long WorkpieceWorkpiece Supports Cutting Warped Material Clamping Wide WorkpiecesRight Wrong Wide Board ClampMaintenance GeneralLubrication Extension CordsBrush Replacement Proceed as follows when replacement is requiredBrush CAP Brush Assembly Troubleshooting Problem Cause SolutionFigure a Figure a Parts List Key Part Number Description QuanFigure B Figure B Parts List Operators Manual 10 in mm Miter Saw Model TS1300 Ryobi Technologies INC

TS1300 specifications

The Ryobi TS1300 is a standout tool in the landscape of portable table saws, catering to both professionals and DIY enthusiasts alike. This compact saw has gained recognition for its impressive blend of performance, convenience, and versatility, making it a popular choice for various woodworking tasks.

One of the main features of the TS1300 is its powerful 15-amp motor, delivering a robust performance capable of handling tough materials. This motor allows the saw to achieve a no-load speed of up to 5,000 RPM, enabling smooth and precise cuts. The saw is designed to handle both rip cuts and cross cuts, making it ideal for a range of applications, from crafting complex furniture to simple home repairs.

In terms of cutting capacity, the Ryobi TS1300 offers an impressive maximum rip capacity of 30 inches, allowing users to work on larger panels effortlessly. Its adjustable blade height and angle further enhance the tool’s versatility, providing a cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. This adaptability is essential for craftsmen working on intricate projects requiring various angles and depths.

Moreover, the TS1300 is equipped with an innovative onboard storage system that keeps the accessories organized and readily available. This feature is particularly beneficial for users who need to quickly access their tools while working on different tasks, boosting overall efficiency.

Safety is also a key consideration with the Ryobi TS1300. The saw includes a blade guard and anti-kickback pawls to help minimize the risk of accidents during operation. The built-in push stick enhances user safety by allowing for safe maneuvering of materials without the risk of hand injury.

The lightweight and portable design of the TS1300 makes it easy to transport, making it a great option for job sites and home projects. Its folding stand provides stability while allowing for quick setup and teardown, enhancing user convenience.

In summary, the Ryobi TS1300 combines power, precision, and portability in a user-friendly package. Its range of features, from the powerful motor to the safety enhancements and mobility, positions it as a reliable choice for those looking to tackle woodworking projects with confidence and ease. Whether for professional use or home improvement tasks, the TS1300 delivers the performance and functionality required to achieve high-quality results.
Top Page Image Contents