Ryobi BTS20 manual To USE Outfeed Support, To USE Sliding Table Extension, To Make a Cross CUT

Page 26

OPERATION

TO USE OUTFEED SUPPORT

See Figure 31.

The outfeed support slides to give the operator additional support for cutting long workpieces.

￿With the table saw in the off position, stand behind the saw.

￿Grasp the outfeed support with both hands and pull the outfeed support until it is fully extended.

TO USE SLIDING TABLE EXTENSION

See Figure 32.

The sliding table extension provides the operator with addi- tional table width for supporting wider workpieces.

￿Set the rip fence to 19 in. as shown in figure 32.

￿Loosen the table extension knobs beneath the sliding table extension by turning them counterclockwise.

￿Using the extension scale window, grasp the sliding table extension with both hands and pull the sliding extension table until it indicates the desired measurement.

Note: The sliding extension table will extend to 27 in. of rip capacity.

￿Retighten the table extension knobs.

WARNING:

Never stand directly in line with the blade or allow hands to come closer than 3 in. to the blade. Do not reach over or across the blade. Failure to heed this warning can result in serious personal injury.

MAKING CUTS

The blade provided with your saw is a high-quality combina- tion blade suitable for ripping and crosscut operations.

WARNING:

All blades must be rated for at least 5,500 RPM to prevent possible injury.

OUTFEED SUPPORT

MITER

GAUGE

Fig. 31

EXTENSION

SCALE

WINDOW

Fig. 32

TO MAKE A CROSS CUT

See Figure 33.

WARNING:

Never use rip fence as cutoff gauge when crosscutting.

WARNING:

Make sure the blade guard assembly is installed and working properly to avoid serious personal injury.

It is recommended you make test cuts on scrap wood.

￿Remove the rip fence by lifting the locking handle.

￿Set the blade to the correct depth for the workpiece.

Page 26

-

+

Fig. 33

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operators Manual Save this Manual for Future ReferenceTable of Contents Product SpecificationsSymbol Meaning Rules for Safe OperationRead ALL Instructions Before Making a CUT, be Sure ALL Adjustments are Secure Blades Coast After Turn OFFSafety and International Symbols Electrical Connection ElectricalExtension Cords Grounding InstructionsGlossary of Terms Wrench #2 Phillips Screwdriver Framing Square UnpackingTools Needed Loose Parts List Key Description QtyFeatures Getting to Know Your SAWPower Switch Operating ComponentsPrecision Ground MICRO-GRAIN Carbide Teeth Blade Rotation Speed and WiringBlades Assembling Bumpers AssemblyAssembling Wheels and HUB Caps WheelOpening the LEG Stand Closing the LEG Stand RIP Fence Front Rail To Install RIP FenceREMOVING/REPLACING the Throat Plate Finger HoleTo Check SAW Blade Installation To Install Blade Guard AssemblyReplacing the Throat Plate Operation Types of Cuts Blade Throatguard Plate Rotate Blade AdjustingTo Remove the Blade Push Bevel Locking Locking Lever LeftInch To CHECK, Replace or Adjust the Blade Guard AssemblyRiving Knife Shims HEX Nuts To SET the Scale to the Blade To Adjust the Blade DepthTo Adjust the Blade Angle Heeling Paralleling the Blade to the Miter Gage Groove See Figures 28To Make a Cross CUT To USE Outfeed SupportTo USE Sliding Table Extension Miter Gauge Extension Scale WindowTo Make a Miter CUT To Make a Straight RIP CUTMiter Gauge RIP Fence Bevel Locking Lever To Make a Bevel Cross CUTTo Make a Bevel RIP CUT Featherboard To Make a Compound Miter CUTTo Make NON-THROUGH Cuts Bevel Locking Lever Pushblock ClampTo Make Dado Cuts MaintenanceGeneral Maintenance LubricationStop Bolt To SET Blade AT 0 orTo Check the Alignment of the RIP Fence to the Blade Nuts Clamp Screw RIP Fence Blade Locking Handle ScrewsTrouble Shooting Problem Possible Cause SolutionPage Operators Manual 10 in mm Table Saw Model BTS20 Ryobi TECHNOLOGIES, INC

BTS20 specifications

The Ryobi BTS20 is a versatile and efficient table saw that caters to both DIY enthusiasts and professional woodworkers alike. Designed with precision and user-friendliness in mind, the BTS20 is a reliable addition to any workshop, delivering impressive cutting performance and functionality.

One of the standout features of the Ryobi BTS20 is its powerful 15-amp motor, which provides ample power to tackle a variety of cutting tasks. The motor is capable of delivering a no-load speed of up to 5,000 RPM, ensuring that users can make clean and accurate cuts through different materials, including hardwoods and plywood. This makes the BTS20 suitable for a wide range of applications, from small home projects to larger, more complex woodworking endeavors.

The table saw boasts a spacious 27-inch by 18-inch table surface, providing ample workspace for larger workpieces and ensuring stability during operations. The tabletop is made from high-quality materials to enhance durability and promote smooth feeding of materials. Furthermore, the BTS20 features an adjustable fence system, which allows for quick and precise adjustments, ensuring accurate cuts every time.

Safety is a fundamental consideration in the design of the Ryobi BTS20. The saw is equipped with a blade guard that helps protect users from accidental contact with the blade during operation. Additionally, the saw includes an electric brake that stops the blade quickly, minimizing the risk of injury. With built-in kickback protection, the BTS20 also helps to keep the user safe from unforeseen accidents during cutting tasks.

Another noteworthy characteristic of the Ryobi BTS20 is its portability. The saw includes foldable legs that make it easy to set up and take down, allowing users to transport it between job sites with ease. The lightweight design contributes to its portability while ensuring that it remains stable during operation.

In terms of technology, the Ryobi BTS20 features a well-engineered dust collection system that helps maintain a clean workspace. This system is designed to minimize the amount of sawdust and debris produced during cutting, contributing not only to cleanliness but also to better visibility of the work area.

In conclusion, the Ryobi BTS20 is a power-packed table saw that combines performance, safety, and portability. With its robust motor, spacious work surface, and user-friendly features, it stands as an impressive option for anyone serious about woodworking. Whether you're crafting a new piece of furniture or tackling home renovations, the Ryobi BTS20 will not disappoint.
Top Page Image Contents