Ryobi BTS10 manual To Make a Compound Bevel Miter CUT, Compound Miter CUT

Page 26

OPERATION

nPosition the rip fence the desired distance from the right side of the blade and lock down the lever.

nIf ripping a piece larger than 36 in. long, place a support the same height as the table surface behind the saw for the cut work.

nMake sure the wood is clear of the blade before turning on the saw.

nTurn the saw ON.

nPosition the workpiece flat on the table with the edge flush against the rip fence. Let the blade build up to full speed before feeding the workpiece into the blade.

nUsing a push stick and/or push blocks, slowly feed the workpiece toward the blade. Stand slightly to the side of the wood as it contacts the blade to reduce the chance of injury should kickback occur.

nOnce the blade has made contact with the workpiece, use the hand closest to the rip fence to guide it. Make sure the edge of the workpiece remains in solid contact with both the rip fence and the surface of the table. If rip- ping a narrow piece, use a push stick to move the piece through the cut and past the blade.

nWhen the cut is made, turn the saw OFF. Wait for the blade to come to a complete stop before removing any part of the workpiece.

nAfter the blade has stopped completely, remove the cutoff stock.

nGrasp the workpiece from the lead end (the end fed into the blade first) and carefully remove it from the saw table.

TO MAKE A COMPOUND (BEVEL) MITER CUT

See Figure 28.

WARNING:

Make sure the blade guard assembly is installed and working properly to avoid serious personal injury.

nRemove the rip fence by depressing the lock and lifting the locking handle.

nTurn the bevel locking lever to the left to unlock it. Turn the height adjusting handle until the bevel indicator is at the desired angle.

nSet the blade to the correct depth for the workpiece and retighten the bevel locking lever.

nSet the miter gauge to desired angle and tighten the miter gauge lock knob.

nMake sure the wood is clear of the blade before turning on the saw.

nTurn the saw ON.

nHold the workpiece firmly with both hands on the miter gauge and feed the workpiece into the blade.

NOTE: The hand closest to the blade should be placed on the miter gauge lock knob and the hand farthest from the blade should be placed on the miter gauge and workpiece.

nKeep the workpiece flush against the miter gauge. Stand slightly to the side of the wood as it contacts the blade to reduce the chance of injury should kickback occur.

nWhen the cut is made, turn the saw OFF. Wait for the blade to come to a complete stop before removing any part of the workpiece.

nAfter the blade has stopped completely, remove the cutoff stock.

COMPOUND MITER CUT

Fig. 28

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules To move into the cutting tool Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningExtension Cords Speed and WiringElectrical Electrical ConnectionGlossary of Terms Features Product SpecificationsKnow Your Table SAW OverviewBlades Power SwitchOverload Reset Button 10 mm, 11 mm Tools NeededWrench Phillips Screwdriver Flathead Framing SquareLoose Parts List Key Description QtyUnpacking AssemblyTo Install the Blade Adjusting Handle Mounting HolesTo Check SAW Blade Installation To REMOVE/REPLACE the Throat PlateTo Install Blade Guard Assembly To Check and Align the SAW Blade and Blade Guard AssemblyOperation Cross CUT Types of CutsCutting Tips Featherboard HOW to Mount a FeatherboardHOW to Make a Featherboard Featherboard Push Stick Push BlockTo Adjust the Bevel Indicator To Adjust the Blade DepthTo Adjust the Bevel Angle Screwdriver Bevel IndicatorTo USE the Miter Gauge To Install the RIP FenceTo SET the RIP Fence Scale Indicator to the Blade Cross CUT Switch OFF Reset Button To Make a Cross CUTMiter CUT RIP CUT To Make a Miter CUTTo Make a RIP CUT Bevel Cross CUT Bevel RIP CUT To Make a Bevel Cross CUTTo Make a Bevel RIP CUT To Make a Compound Bevel Miter CUT Compound Miter CUTTo Make a NON-THROUGH CUT NON-THROUGH CUT Blade Guard Removed Push StickClamp Screw RIP Fence SAW Blade Screws Locking Handle AdjustmentsTo Check the Alignment of the RIP Fence to the Blade To SET the 45 Positive Stop Positive Stop Adjustment ScrewTo SET the 90 Positive Stop Lubrication MaintenanceGeneral Maintenance To Remove or Change the BladeTroubleshooting Problem Possible Cause SolutionService Model NO. and Serial no

BTS10 specifications

The Ryobi BTS10 is a high-performance table saw designed for both amateur woodworkers and seasoned professionals. Known for its powerful motor and solid construction, this table saw offers a blend of precision and convenience, making it an excellent choice for various woodworking tasks.

One of the standout features of the BTS10 is its robust 15-amp motor, providing ample power to handle tough cutting jobs. This motor ensures that it can effectively rip through hardwoods and softwoods alike, delivering clean and accurate cuts. The tool has a no-load speed of 5000 RPM, allowing for quick and efficient cutting, which is particularly beneficial for large-scale projects.

The BTS10 comes equipped with a spacious 27-inch aluminum table that provides ample workspace, enhancing stability and control during cuts. The table’s surface is designed to be smooth, which minimizes friction and improves accuracy. Moreover, the saw features a cast iron trunnion system that enhances stability, further contributing to the precision of cuts.

For added convenience, the Ryobi BTS10 includes a built-in blade guard and anti-kickback pawls. These safety features are essential in preventing accidents and ensuring user safety during operation. Additionally, this model also incorporates an adjustable miter gauge, allowing users to make angled cuts easily. The miter gauge slides along the table’s slots for increased accuracy when making crosscuts.

The BTS10 also supports a bevel adjustment feature that allows users to tilt the blade up to 45 degrees. This capability is ideal for making bevel cuts, providing versatility for various woodworking applications. The blade height can also be adjusted easily using a convenient handwheel, enhancing user control over cut depth.

In terms of portability, the BTS10 is designed with user convenience in mind. Although it’s built for durability, it remains relatively lightweight, making it easier to transport to job sites or storage.

Overall, the Ryobi BTS10 table saw combines power, usability, and safety features, making it a versatile tool capable of handling a range of woodworking tasks. Whether you’re a hobbyist looking to expand your workshop or a professional seeking a reliable table saw, the BTS10 delivers the performance and features required for precision woodworking.
Top Page Image Contents