Ryobi BTS10 To Make a Bevel Cross CUT, To Make a Bevel RIP CUT, Bevel Cross CUT Bevel RIP CUT

Page 25

OPERATION

TO MAKE A BEVEL CROSS CUT

See Figure 26.

WARNING:

Make sure the blade guard assembly is installed and working properly to avoid serious personal injury.

nRemove the rip fence by depressing the lock and lifting the locking handle.

nTurn the bevel locking lever to the left to unlock it. Turn the height adjusting handle until the bevel indicator is at the desired angle.

nSet the blade to the correct depth for the workpiece and retighten the bevel locking lever.

nSet the miter gauge at 90° and tighten the miter gauge lock knob.

nPlace a support (the same height as saw table) behind the saw for the cut work.

nMake sure the wood is clear of the blade before turning on the saw.

nTurn the saw ON.

nLet the saw blade build up to full speed before moving the miter gauge and the workpiece into the blade.

nHold the workpiece firmly with both hands on the miter gauge and feed the workpiece into the blade. Keep the workpiece flush against the miter gauge. Stand slightly to the side of the wood as it contacts the blade to reduce the chance of injury should kickback occur.

NOTE: The hand closest to the blade should be placed on the miter gauge lock knob and the hand farthest from the blade should be placed on the workpiece.

nWhen the cut is made, turn the saw OFF. Wait for the blade to come to a complete stop before removing any part of the workpiece.

TO MAKE A BEVEL RIP CUT

See Figure 27.

WARNING:

When making a bevel rip cut, the rip fence must be on the right side of the blade to avoid trapping the wood and causing kickback. Placement of the rip fence to the left of the blade will result in kickback and the risk of serious personal injury.

WARNING:

Make sure the blade guard assembly is installed and working properly to avoid serious personal injury.

nRemove the miter gauge by sliding it out of the miter gauge groove.

nTurn the bevel locking lever to the left to unlock. Turn the height adjusting handle until the bevel indicator is at the desired angle.

nSet the blade to the correct depth for the workpiece and push the bevel locking lever to the right to relock it.

BEVEL CROSS CUT

Fig. 26

BEVEL RIP CUT

Fig. 27

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules To move into the cutting tool Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Speed and WiringExtension Cords Electrical ConnectionGlossary of Terms Product Specifications FeaturesOverview Know Your Table SAWOverload Reset Button Power SwitchBlades Wrench Tools Needed10 mm, 11 mm Phillips Screwdriver Flathead Framing SquareKey Description Qty Loose Parts ListTo Install the Blade Adjusting Handle AssemblyUnpacking Mounting HolesTo REMOVE/REPLACE the Throat Plate To Check SAW Blade InstallationTo Check and Align the SAW Blade and Blade Guard Assembly To Install Blade Guard AssemblyOperation Cutting Tips Types of CutsCross CUT HOW to Make a Featherboard HOW to Mount a FeatherboardFeatherboard Featherboard Push Stick Push BlockTo Adjust the Bevel Angle To Adjust the Blade DepthTo Adjust the Bevel Indicator Screwdriver Bevel IndicatorTo SET the RIP Fence Scale Indicator to the Blade To Install the RIP FenceTo USE the Miter Gauge To Make a Cross CUT Cross CUT Switch OFF Reset ButtonTo Make a RIP CUT To Make a Miter CUTMiter CUT RIP CUT To Make a Bevel RIP CUT To Make a Bevel Cross CUTBevel Cross CUT Bevel RIP CUT Compound Miter CUT To Make a Compound Bevel Miter CUTNON-THROUGH CUT Blade Guard Removed Push Stick To Make a NON-THROUGH CUTTo Check the Alignment of the RIP Fence to the Blade AdjustmentsClamp Screw RIP Fence SAW Blade Screws Locking Handle To SET the 90 Positive Stop Positive Stop Adjustment ScrewTo SET the 45 Positive Stop General Maintenance MaintenanceLubrication To Remove or Change the BladeProblem Possible Cause Solution TroubleshootingService Model NO. and Serial no

BTS10 specifications

The Ryobi BTS10 is a high-performance table saw designed for both amateur woodworkers and seasoned professionals. Known for its powerful motor and solid construction, this table saw offers a blend of precision and convenience, making it an excellent choice for various woodworking tasks.

One of the standout features of the BTS10 is its robust 15-amp motor, providing ample power to handle tough cutting jobs. This motor ensures that it can effectively rip through hardwoods and softwoods alike, delivering clean and accurate cuts. The tool has a no-load speed of 5000 RPM, allowing for quick and efficient cutting, which is particularly beneficial for large-scale projects.

The BTS10 comes equipped with a spacious 27-inch aluminum table that provides ample workspace, enhancing stability and control during cuts. The table’s surface is designed to be smooth, which minimizes friction and improves accuracy. Moreover, the saw features a cast iron trunnion system that enhances stability, further contributing to the precision of cuts.

For added convenience, the Ryobi BTS10 includes a built-in blade guard and anti-kickback pawls. These safety features are essential in preventing accidents and ensuring user safety during operation. Additionally, this model also incorporates an adjustable miter gauge, allowing users to make angled cuts easily. The miter gauge slides along the table’s slots for increased accuracy when making crosscuts.

The BTS10 also supports a bevel adjustment feature that allows users to tilt the blade up to 45 degrees. This capability is ideal for making bevel cuts, providing versatility for various woodworking applications. The blade height can also be adjusted easily using a convenient handwheel, enhancing user control over cut depth.

In terms of portability, the BTS10 is designed with user convenience in mind. Although it’s built for durability, it remains relatively lightweight, making it easier to transport to job sites or storage.

Overall, the Ryobi BTS10 table saw combines power, usability, and safety features, making it a versatile tool capable of handling a range of woodworking tasks. Whether you’re a hobbyist looking to expand your workshop or a professional seeking a reliable table saw, the BTS10 delivers the performance and features required for precision woodworking.
Top Page Image Contents