Heath Zenith SH-5311 manual Operation, Features, Requirements

Professional Motion Sensor Quartz Security Light

Model SH-5311

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Bulb Saver™ - Extends bulb life by up to 4x standard bulbs. Lights bulb to full bright in under 2 seconds.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

This package includes:

6 Screws	S-hook
(3 sizes included)		Cover Plate
		Gasket
		1 Halogen
		Lamp
	Cover
	Plate
	Sensor	3 Wire
		Connectors
Light Control

Requirements

•The light control requires 120-volts AC.

•This fixture is designed for wall mounting only.

•If you want to use Manual Override, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

•The backplate has knockouts so the sensor can be mounted on most junction boxes.

•In some applications a universal adaptor plate may be needed. Adaptors are available at Home Centers and Electrical Supply Stores.

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Normal	1, 5, 10 min.		x
Manual	Until Dawn*		x
	* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put the ON-TIME switch on the	ON-TIME
bottom of the sensor in the TEST
position.
	10 5 1 TEST
AUTO
Put the ON-TIME switch in the 1, 5,	ON-TIME
or 10 minute position.
	10 5 1 TEST
MANUAL MODE

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

... back on.

© 2008 HeathCo LLC 598-1343-00