Mount the Light Control
❒Align the light control cover plate and cover plate gasket and the junction box. Insert and tighten the mounting screws.
❒If not installed on a weatherproof box or if an adaptor plate is used, caulk the wall plate and mounting surface with silicone weather sealant.
+/- 4°
MOUNT HORIZONTALLY
The halogen light must be mounted horizontally (+/- 4°).
Bulb Installation and Re-lamping
❒When
CAUTION: To Avoid Fire Or Burn Hazards:
•Allow fixture to cool before touching. The bulb and the fixture operate at high temperatures.
•Keep fixture at least 2" (51 mm) from combustible ma- terials. Do not aim at objects closer than 3 ft. (1 m).
•
❒Remove glass cover and remove the old bulb by pushing the bulb towards the right until the left side of the bulb is clear of the left socket.
❒To insert the new bulb, push the bulb into the right socket so the bulb fits completely into the left socket.
❒Check that the bulb is seated properly.
❒
For proper operation and safety,the light fixture must be above the sensor and the sensor head must be rotated so that the controls are on the bottom.