Firestone EMDG198 manual 126, Rolled Plate Assembly Ply, Bellows Blind nuts, 3/4 NPT WO1-358-7726

Page 52

126

																																						RECOMMENDED																							Static Data
					Description										Assembly Order No.																									AIRMOUNT																					Static Data
					Description										Assembly Order No.																							DESIGN HEIGHT																											8701
																																						DESIGN HEIGHT																											8701
	Style		Ribbed neck aluminum																																					5.0 INCHES
	Style		Ribbed neck aluminum
	126		bead rings (equal spacing),																			17
	126		bead rings (equal spacing),
			17/8 bolts, nuts, washers												WO1-358-7727
	Two		17/8 bolts, nuts, washers												WO1-358-7727										Do				not use Airstroke in
	Two		Rolled Plate Assembly,
	Ply
	Ply																					16			shaded area without
	Bellows		1/2 blind nuts, 3/4 NPT												WO1-358-7726							16			consulting Firestone
																																																															100 Psig
	Assembly weight ...................................................... 21.3 lbs.

	Force to collapse to minimum height (@ 0 PSIG)....... 25 lbs.																					15																Volume																																			30
																						14																100 Psig
																		100																				100 Psig


																						13


																					x																																											80 Psig									25
																					x

	24 (3/8-24) BOLTS																				IN.	12
																					CU	12


	EACH RING																					11																																																				xLBSFORCE1000
																						11

																					BUMPER)(WITHOUT	10																																																			20
																					BUMPER)(WITHOUT	10																																																			20
																																																																	60 Psig
																						9																																											60 Psig
																						9
																						8																																																			15


																						7
																						7																																										40 Psig
																																																																40 Psig

	28-32 FT. LBS.																					6
	TORQUE
								19.00 BOLT CIRCLE DIA.													VOLUME	5																																																			10
																					VOLUME


										22.4 MAX O.D.
											AT 100 PSIG											4
																						4
																						3

																		HEIGHT																																														20 Psig									5
																		HEIGHT



																						2
																						2
											20.36 DIA.											1





	NOTE: A bead ring part is shown. This part is also avail-
	NOTE: A bead ring part is shown. This part is also avail-
	able with rolled plates. See page 11 for explanation.																					MAX. HT.																																																MIN. HT.
																							7								6							5												4										3					2
																																									HEIGHT IN.
																							See page 12 for instructions on how to use chart.

	Dynamic Characteristics at 5.0 in. Design Height																							Force Table (Use for Airstroke® actuator design)
	(Required for Airmount isolator design only)
	(Required for Airmount isolator design only)																															Volume																	Pounds Force
																																Volume																	Pounds Force
	Volume @ 100 PSIG = 1,315 in3														Natural								Assembly								@ 100
	Volume @ 100 PSIG = 1,315 in3														Natural										Height							PSIG							@20					@40							@60									@80							@100
															Frequency											(in.)							(in3)							PSIG					PSIG							PSIG								PSIG								PSIG
	Gage										Spring				Frequency											(in.)							(in3)							PSIG					PSIG							PSIG								PSIG								PSIG
	Pressure					Load					Rate				CPM			HZ					6.0								1,589								4,390					8,880							13,580							18,360									23,450
	Pressure					Load					Rate
	(PSIG)					(lbs.)				(lbs./in.)
	(PSIG)					(lbs.)				(lbs./in.)

	40			11,030					6,237						141			2.35					5.0								1,315								5,560					11,030							16,710							22,460									28,290

	60			16,710					8,763						136			2.26
	60			16,710					8,763						136			2.26					4.0								1,007								6,120					12,120							18,330							24,660									30,930

	80			22,460					11,345						133			2.22
	80			22,460					11,345						133			2.22
																							3.0								676								6,440					12,830							19,330							25,990									32,600
	100			28,290					13,751						131			2.18					3.0								676								6,440					12,830							19,330							25,990									32,600
	100			28,290					13,751						131			2.18

52

Image 52

Contents Irmount R Table of Contents IntroductionAdvantages of Firestone Airstroke Actuators Advantages of Firestone Airmount Isolators AIR Spring Bellows ConstructionConvoluted AIR Springs END Closure OptionsReversible Sleeve AIR Springs 16 UNC To Air Supply Blind Nut Deep Tightening Torque On the blind nut 15 to 20 ft.-lbsUNC Thread Firestone Attach the air spring, a Stud Adapter is available fromSteel Bead Rings Nuts and Lockwashers are included withLarge Parts with Aluminum Bead Rings Installation MaterialStandard Bolt Length 16-24 UNFLarge Convoluted AIR Springs 9mmHOW to USE Static Data Chart Airstroke Actuation752 180 349Airmount Isolation Internal Rubber BumpersTemperature MediaPressure ContaminatesAirstroke Actuation SelectionDown and UP Stops ReturnHorizontal Misalignment Design EnvelopeStacking Fail Safe DevicesStyle TE StyleAirstroke Actuator Problem Solvers Forming Press Vertical Actuated Drive Table Scissor Lift Airmount Vibration Isolation Selection and Isolation FormulaDynamic Spring Rate Formula Natural Frequency FormulaLateral Rates and Stability Center of GravityHeight Lateral Rate Vertical Rate Safety Stops Initial InstallationIsolating AN Unbalanced Mass LOW Pressure OperationPlumbing Systems DampingDescription Order No Resonance Isolation Chart Hertz CPMPercent Airmount Isolation Problem Solvers Airmount Isolation Problem Solvers Miscellaneous Applications Miscellaneous Problem Solvers Miscellaneous Problem Solvers 450 400 600 500470 410 360 10.8Type 1 bead plate Type 2 bead plateType 3 bead plate Type 4 bead ring Type 5 rolled plateDynamic Characteristics at 2.5 in. Design Height 1M1AShaded area without Consulting FirestoneDescription 1M1A-1Static Data 2M1A Style NPT, each end 2M1A Plastic studs WO2-358-3002Ply Brass studs WO2-358-3004 Throughout the strokeStyle Blind nut,1/8 NPT 2M2A Plastic studs WO2-358-3008 2M2APsig Style Blind nuts, 1/4 NPT Blind nuts, 3/4 NPT NPT only upper plateBlind nuts lower plate Rubber bellows onlyShaded area 25 lbsStyle Blind nuts, 1/4 NPT 131 Blind nuts, 3/4 NPT 13132 lbs WO1-358-0112 110Rubber bellows only WO1-358-0100 Strength 116WO1-358-7606 Dynamic Characteristics at 5.5 in. Design Height 116-1Area without Consulting Firestone 37 lbsVolume 115WO1-358-7023 Dynamic Characteristics at 5.0 in. Design HeightRubber bellows only WO1-358-0134 Style Blind nuts, 1/4 NPT WO1-358-7040 19-.75 19-.7510.0 lbs 113 14.5 lbsStyle Blind nuts, 3/4 NPT WO1-358-8160 128-1 High Strength 113-115.2 lbs 17.1 lbs Dynamic Characteristics at 6.0 in. Design HeightFrequency Do not use Airstroke 11913.2 lbs Static Data Description Able with rolled plates. See page 11 for explanation126 Rolled Plate Assembly PlyBellows Blind nuts, 3/4 NPT WO1-358-7726 WO1-358-0147 Rubber bellows only High Strength24.5 lbs 148-1 This bead ringNo blind nuts Ply NPT both endsNo girdle hoop 255-1.5 50 lbsDynamic Characteristics at 6.5 in. Design Height 224Able with bead rings. See pages 8-10 for explanation 14 lbsStyle Blind nuts, 1/4 NPT WO1-358-7325 Blind nuts, 3/4 NPT WO1-358-7327Rubber bellows only WO1-358-0142 Shaded area without Consulting FirestoneDynamic Characteristics at 8.5 in. Design Height X10020-2 UseDynamic Characteristics at 9.5 in. Design Height Dynamic Characteristics at 10.5 in. Design Height 22-1.5Style Blind nuts, 1/4 NPT WO1-358-7444 22-1.5 12.9 lbs100x 21-2 Minimum heightDynamic Characteristics at 11.25 in. Design Height 233-2Style Blind nuts, 1/4 NPT 233-2 Blind nuts, 1/4 NPT Two Rubber bumperStyle Two Ply Bellows 19.0 lbs203 Style Ribbed neck aluminum bead 203 Rings equal spacing8 bolts, nuts, washers WO1-358-7227 Ribbed neck aluminum bead PlyRubber bellows only WO1-139-0207 WO1-358-723928.8 lbs 200 Style200 Rings equal spacing WO1-358-7775215 Style Ribbed neck aluminum bead215 Rings equal spacing WO1-358-7301 Ribbed neck aluminum bead BellowsBead ring Dynamic Characteristics at 11.0 in. Design Height 248-272.5 lbs Force to collapse to minimum height @ 0 PSIG.... lbs352 Dynamic Characteristics at 13.5 in. Design Height20.3 lbs Dynamic Characteristics at 13.0 in. Design Height 313Style Blind nuts, 1/4 NPT 313 46 lbsDynamic Characteristics at 14.70 in. Design Height 333WO1-358-7760 312WO1-358-8004 Rubber bellows only WO1-358-7921 323Do not Dynamic Characteristics at 14.0 in. Design Height 320Rubber bellows only WO1-358-0987 WithoutDynamic Characteristics at 15.0 in. Design Height 321WO1-358-7306 Rubber bellows only WO1-358-7919348-3 Style Thin wall assembly 1X84D-1 Without cap WO1-358-9188 Dynamic Characteristics at 8.0 in. Design Height1X84D With cap dotted line WO1-358-91904001 Style Blind nut, 1/8 NPT WO2-358-40017002 Style Blind nut, 1/8 NPT WO2-358-70027010 Style Blind nut, 1/8 NPT WO2-358-70107012 Style Blind nut, 1/8 NPT WO2-358-7012Ring bolts, nuts, washers not 1T12E-3Ply Included, use cap screws WO1-358-8118 1T14C-1 Style Blind nuts, 1/4 NPT WO1-358-5405 1T14C-3 1T14C-3Than 10 Psig internal pressure 1T14C-7 Style Blind nuts, 1/4 NPT WO1-358-5743 1T28C-7 High StrengthDynamic Characteristics at 7.0 in. Design Height 10.4 lbs1T15S 13.7 lbsStyle Blind nuts, 1/4 NPT WO1-358-9414 1T15L-4 15.5 lbsDynamic Characteristics at 7.5 in. Design Height Static DataAvailable with a bead ring. Bolts are not included 140WO1-358-9053 Two Blind nuts, 3/4 NPT WO1-358-9054 1T15M-2WO1-358-9099 1T15M Dynamic Characteristics at 12.5 in. Design Height14.3 lbs Assembly weight bead plate version, no bumper .... .7 lbs Blind nuts, 3/4 NPT piston Not included WO1-358-073018.0 lbs Style Blind nuts, 1/4 NPT WO1-358-9148 1T19L-7 Blind nuts, 1/4 NPT, bumper WO1-358-9149Blind nuts, 3/4 NPT WO1-358-9172 Ply Blind nuts, 3/4 NPT, bumper WO1-358-91601T19L 22.6 lbsIndex Airstroke Actuator Design Parameter Worksheet Airmount Isolator Design Parameter Worksheet For Vibration IsolationAirstroke