Rollei CWC200ST General Maintenance, Changing the Oil, Draining Tank Twist-Style Drain Cocks

Page 9

GENERAL MAINTENANCE (continued)

Changing the Oil:

OIL SHOULD BE CHANGED WITHIN THE FIRST 50 HOURS OF OPERATION, OIL SHOULD BE CHANGED EVERY 3 MONTHS OR 300 HOURS OF OPERATION THEREAFTER.

1.Verify the compressor is turned Off.

2.Place a small catch basin under the oil drain port (an 8oz. cup will work fine).

3.Remove the oil fill plug.

4.Remove the oil drain plug.

5.Allow the oil to drain into the catch basin - tilting the compressor toward the drain plug is beneficial.

6.Insert the oil drain plug into the oil drain port.

7.Add 6.7 oz of synthetic 5W50 weight non detergent oil to the crankcase.

This BOSTITCH air compressor is shipped with 5W-50 synthetic compressor oil for maximum all weather performance. The air compressor pump is also compatible with any other synthetic air compressor oil, standard 30 weight non-detergent compressor oil, or 5W-50 synthetic motor oils.

8.Insert oil fill plug.

Draining Tank - Twist-Style Drain Cocks:

1.Verify that the compressor is turned Off.

2.Holding the handle, tilt the compressor toward the drain cocks so that they are positioned at the bottom of the tank.

3.Turn the drain cocks counter clockwise to open the valves.

4.Keep the compressor tilted until all moisture has been removed.

5.Turn the drain cocks clockwise to close

Checking/Cleaning the Air Filter:

COOLING FINS, PUMP HEAD, AND SURROUNDING PARTS ARE VERY HOT.

DO NOT TOUCH.

1.Verify that the compressor is turned Off.

2.Remove the screw on face of filter assembly.

3.Remove the filter element from the filter housing.

4.Clean filter pad with soap and water as necessary. If the filter becomes clogged or damaged, replace filter assembly.

NEVER CLEAN AIR FILTER WITH A FLAMMABLE LIQUID OR SOLVENT. EXPLOSIVE VAPORS MAY ACCUMULATE IN THE AIR TANKS AND CAUSE AN EXPLOSION, RESULTING IN SERIOUS INJURY OR DEATH.

5.Insert filter element into the housing.

6.Re-assemble filter assembly to pump.

ANY OTHER SERVICE SHOULD ONLY BE PERFORMED

BY AN AUTHORIZED BOSTITCH SERVICE CENTER

-9-

Image 9
Contents CWC200ST Operation and Maintenance ManualLimited Warranty IntroductionIndex Rules for Safe Operation Attachments and AccessoriesBe Educated Avoid Moving Parts Personal ProtectionAir Tanks Rules for Safe OperationVentilation Risk of BurnsElectrical Grounding Instructions Safety ValveDuty Cycle Electrical Grounding InstructionsFeatures of the Bostitch CWC200ST Operation Instructions General MaintenanceChecking/Cleaning the Air Filter General MaintenanceChanging the Oil Draining Tank Twist-Style Drain CocksProblem Cause Trouble Shooting GuideÍndice IntroducciónNotas Garantía LimitadaReglas Para EL Funcionamiento Seguro Tanques de aire Reglas Para EL Funcionamiento Seguro continuaciónVentilación Peligro de quemadurasVálvula de seguridad Instrucciones DE Conexión Eléctrica a TierraSi debe usar un cable de extensión, use estas directrices Instrucciones DE Conexión Eléctrica a Tierra continuaciónCaracterísticas DEL Bostitch CWC200ST Mantenimiento General Instrucciones DE OperaciónCambio de aceite Mantenimiento General continuaciónDrenaje del tanque Grifo de drenaje que se gira Verificación y limpieza del filtro de aireProblema Causa probable Corrección Guía Para Solucionar ProblemasGarantie Limitée RemarqueRègles Pour UNE Utilisation Sans Risque Risque de brûlures Réservoirs d’airSoupape de sûreté Instructions DE Mise À LA TerreInstructions DE Mise À LA Terre suite Cycle DE ServiceFonctions DU Modèle Bostitch CWC200ST Entretien Général Instructions D’UTILISATIONEntretien Général suite Vidange de l’huileVérification/nettoyage du filtre à air Problème Cause probable Guide DE Dépannage