Delta 37-195, 37-275X instruction manual Accessories

Page 23

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

Printed in U.S.A.

23

Image 23
Contents Professional Jointer General Safety Rules Safety Guidelines / DefinitionsRefer to them often Use them to instruct others Additional Safety Rules for JointersPower Connections Extension Cords Unpacking and CleaningJointer Parts Stand and Electricals AssemblyAssembling Motor Pulley Assembling Jointer to StandAssembling Belt and Aligning Pulleys Adjusting Belt TensionAssembling Fence Assembling Fence Carriage AssemblyAssembling Cutterhead Guard Assembling Switch and Mounting BracketStarting and Stopping Jointer Operating Controls and AdjustmentsAssembling Dust Chute Infeed Table Adjustments Locking Switch OFF PositionInfeed Table Positive Stops Outfeed Table AdjustmentsKnife Adjustments Page Fence Operation Adjusting Table GibsLock nut D. Turn adjustment screw a until Adjusting Fence Positive StopREMOVING, REPLACING, and Resetting Knives Jointing AN Edge Placement of Hands During FeedingOperation Cutting a Rabbet SurfacingBeveling Taper CutsDirection of Grain Maintenance and RepairsSurfacing Warped Pieces Surfacing Short Or Thin WorkConstructing a Push Stick PushstickAccessories Canadian PORTER-CABLE Delta Service Centers