Delta 37-195, 37-275X instruction manual Professional Jointer

Page 1

6" Professional Jointer

(Model 37-195) (Model 37-275X)

INSTRUCTION MANUAL

PART NO. 909995 - 01-22-03

Copyright © 2003 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Professional Jointer General Safety Rules Safety Guidelines / DefinitionsRefer to them often Use them to instruct others Additional Safety Rules for JointersPower Connections Extension Cords Unpacking and CleaningJointer Parts Stand and Electricals AssemblyAssembling Motor Pulley Assembling Jointer to StandAssembling Belt and Aligning Pulleys Adjusting Belt TensionAssembling Fence Assembling Fence Carriage AssemblyAssembling Cutterhead Guard Assembling Switch and Mounting BracketAssembling Dust Chute Operating Controls and AdjustmentsStarting and Stopping Jointer Infeed Table Adjustments Locking Switch OFF PositionKnife Adjustments Outfeed Table AdjustmentsInfeed Table Positive Stops Page Fence Operation Adjusting Table GibsLock nut D. Turn adjustment screw a until Adjusting Fence Positive StopREMOVING, REPLACING, and Resetting Knives Operation Placement of Hands During FeedingJointing AN Edge Beveling SurfacingTaper Cuts Cutting a RabbetSurfacing Warped Pieces Maintenance and RepairsSurfacing Short Or Thin Work Direction of GrainConstructing a Push Stick PushstickAccessories Canadian PORTER-CABLE Delta Service Centers