Powermatic 60C, 60HH operating instructions Introduction Specifications, 3HP 3PH 230/460V prewired

Introduction

This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Powermatic Model 60C or 60HH Jointer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.

Specifications

Model Number		60C	............................................. 60HH
Stock Numbers:
2HP 1PH 230V		1610084K	...................................... 1610086K
3HP 3PH 230/460V (prewired 230V)*		.......................1610085K	...................................... 1610087K
Maximum depth of cut (in.)		1/2	................................................. 1/2
Maximum rabbeting cut (in.)		1/2	................................................. 1/2
Cutterhead style		straight with 3 knives	....... helical w/ 54 four-sided inserts
Knife size (LxWxT)(in.)		8 x 11/16 x 1/8	.......................... 0.59 x 0.59 x 0.10
Cutterhead speed (RPM)		7000	.............................................. 7000
Knife cuts per minute		21,000	.................................not applicable
Table size (LxH)(in.)		73 x 8-1/2	.......................................73 x 8-1/2
Infeed table length (in.)		35-1/4	............................................ 35-1/4
Outfeed table length (in.)		35-1/2	............................................ 35-1/2
Fence size (LxH)(in.)		38 x 4-3/4	.......................................38 x 4-3/4
Fence tilt (deg.)		45 and 90	.......................................45 and 90
Fence positive stops (deg.)	45 forward, 90, 45 backward		.......... 45 forward, 90, 45 backward
Dust port diameter (in.)		4	.................................................... 4
Sound rating @ 20” (dB)		93	.................................................. 92
Height, floor to outfeed table (in.)		32	.................................................. 32
Footprint of cabinet (LxW)(in.)		24 x 17	...........................................24 x 17
Overall size (LxWxH)(in.)		73 x 25 x 46	................................... 73 x 25 x 46
Overall height of jointer without stand (in.)		13-1/2	............................................. 13-12
Weights:
Jointer (Net/Shipping)(lbs.)		295/363	......................................... 297/366
Stand, 1PH (Net/Shipping)(lbs.)		114/119	......................................... 114/119
Stand, 3PH (Net/Shipping)(lbs.)		118/123	......................................... 118/123

*NOTE: For 460V operation, magnetic switch (part no.PJ882-526C) must be purchased separately and installed. A qualified electrician is recommended.

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.

Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury.

6