Porter-Cable MODEL 7310 Model 7310 Trimmer Assembly, To Install BIT, To Remove BIT

Page 11

TO AVOID PERSONAL INJURY OR DAMAGE TO FINISHED WORK ALWAYS ALLOW THE MOTOR TO COME TO A COMPLETE STOP BEFORE SETTING TRIMMER DOWN.

TO INSTALL BIT

DISCONNECT TOOL FROM POWER SOURCE.

1.On Models 7310 and 7319 bits may be installed with the motor unit either assembled or removed from the base. See instructions under Model 7312 for installing the bit in the OFFSET trimmer. See instructions under Model 7320 for installing the bit in the UNDERSCRIBE trimmer.

2.Clean and insert shank of bit into collet until end of shank bottoms. Then withdraw bit approximately 1/16".

3.Depress spindle lock (Fig. 2) and rotate collet nut clockwise by hand until lock engages hole in motor spindle.

4.While holding spindle lock engaged, tighten collet nut securely by turning clockwise using wrench provided.

NEVER TIGHTEN COLLET WITHOUT BIT INSERTED, TO DO SO MAY CAUSE DAMAGE TO COLLET.

BIT

COLLET NUT

SPINDLE

LOCK

Fig. 2

TO REMOVE BIT

DISCONNECT TOOL FROM POWER SOURCE.NEVER TOUCH TRIMMER BITS IMMEDIATELY AFTER USE, AS THEY MAY BE HOT.

1.On Model 7310 and 7319 bits may be removed with the motor unit either assembled or removed from base. See instructions under Model 7312 for removing bits from the Offset Trimmer.

2.Depress spindle lock and rotate collet nut counterclockwise by hand until lock engages hole in motor spindle.

3.While holding spindle lock engaged, loosen collet nut by turning counterclockwise with wrench provided.

4.If bit does not remove easily from collet, tap the collet nut with wrench to release bit.

MODEL 7310 TRIMMER ASSEMBLY

Model 7310 Trimmer is completely assembled at the factory. The base is assembled to, or removed from Model 7301 Motor with base locking screw (Fig. 3).

NOTE: There is a spring and a flat washer on the locking screw. The spring is assembled with its small end against head of screw. The washer is assembled to the screw after the spring.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Double Insulated Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Clear the Trimmer BIT Area before starting motor Additional Specific Safety RulesPage Symbol Definition Extension Cord Selection MotorOperation Carton ContentsFunctional Description To Remove BIT Model 7310 Trimmer AssemblyTo Install BIT Edge Guide KIT Adjusting Depth of CUTAdjusting SUB-BASE Alignment Flush Trimming Assembling and Adjusting Base and Roller GuideBevel Trimming Model 7319 Tilt Base Trimmer AssemblyUsing Straight Edge Guide Assembling Offset Base to Motor Model 7312 Offset Trimmer AssemblyAdjusting Tilt Operation To Install & Remove BITSUB-BASE Inverted Typical Applications Underscribe 7320 Trimmer AssemblyAdjusting Guide Plate Adjusting BIT ExposureUsing Underscribe Trimmer Troubleshooting Guide Lubrication MaintenanceKeep Tool Clean Failure to StartService and Repairs ServiceAccessories Replacement PartsPORTER-CABLE Limited ONE Year Warranty WarrantyCanadian PORTER-CABLE Delta Service Centers

MODEL 7310 specifications

The Porter-Cable MODEL 7310 is a versatile and user-friendly sander designed to meet the demands of both professional and DIY woodworkers. One of its standout features is its unique sanding system, which utilizes a 3-inch by 21-inch belt for unbeatable efficiency in both large surface areas and intricate detailing. The combination of its powerful motor and adjustable speed settings allows users to customize their sanding experience depending on the task at hand.

One key characteristic of the MODEL 7310 is its ability to deliver a variable speed range, typically ranging from 120 to 400 feet per minute. This flexibility enables users to achieve a smooth finish on various materials, including hardwoods, softwoods, and composites. The sander is equipped with a dust collection system that enhances its usability by minimizing mess. The built-in dust port effectively captures and directs debris away from the work area, ensuring that users can maintain a clean workspace while prolonging the life of the sanding belt.

Another notable feature of the MODEL 7310 is its ergonomic design. The machine includes a cushioned grip that reduces fatigue during prolonged use, allowing for better control and precision. The compact design also makes it lightweight, enhancing maneuverability without sacrificing power. Alongside its comfortable grip, the sander's low profile ensures easy access to tight spaces, such as corners and edges.

Safety is also a priority for Porter-Cable, and the MODEL 7310 is outfitted with important safety features. The sander is designed with a locking mechanism that prevents accidental startup, providing an additional layer of safety for the user. Furthermore, the durable construction of the sander ensures it can withstand the rigors of everyday use, making it a reliable addition to any workshop.

In summary, the Porter-Cable MODEL 7310 stands out in the market due to its high performance, user-friendly features, and robust construction. With its variable speed control, efficient dust collection, ergonomic design, and reliable safety features, it is an excellent choice for anyone seeking a powerful and adaptable sander. Whether you are a seasoned professional or a casual DIY enthusiast, the MODEL 7310 is engineered to deliver exceptional results on any woodworking project.
Top Page Image Contents