Porter-Cable MODEL 7310 Assembling and Adjusting Base and Roller Guide, Flush Trimming

Page 13

A B C D E F G

Fig. 4

ASSEMBLING AND ADJUSTING BASE AND ROLLER GUIDE

1.Remove power unit from base unit (see “TO INSTALL BIT”), and install the bit.

2.The base and roller guide (A) Fig. 4, is assembled at the factory. To assemble, remove a sub-base mounting screw (A) Fig. 5 and insert alignment pin in guide base into hole (C) in bottom of trimmer sub-base. Fasten with two mounting screws (F) Fig. 4, as shown in Fig. 5A. Do not tighten at this time.

3.Install proper bit as outlined under “TO INSTALL BIT.” Then, install motor to base and adjust depth of cut (see “ADJUSTING DEPTH OF CUT”).

4.Align roller guide with bit by loosening locking screw (Fig. 5A) and turning adjusting screw, with hex wrench provided, until guide is in desired location.

NOTE: Guide mounting holes are oversized allowing guide to be rotated on alignment pin to align guide roller with bit.

5.For making flush cuts align roller guide with straight portion of bit. For bevel cuts, adjust cutting depth so that only the bevel portion of bit projects through trimmer base and adjust roller guide to produce desired amount of bevel.

6.Tighten all screws and make a trial cut on scrap material to check alignment. Readjust if necessary.

A C

Fig. 5

LOCKING SCREW

ADJUSTING SCREW

MOUNTING

SCREW

Fig. 5A

FLUSH TRIMMING

1. DISCONNECT TOOL FROM POWER SOURCE.

2.Attach base and guide to trimmer as outlined under ASSEMBLING AND ADJUSTING BASE AND ROLLER.

3.Remove roller guide and replace with flush trimming guide (B) Fig. 4. This guide may be identified by the molded on letter “F”. The stud on the end of this guide must face toward the trimmer base.

4.Install guide setting gauge (E) Fig. 4, into trimmer collet (see TO INSTALL BIT). Install trimmer motor to base. Adjust guide so that hole in end of gauge may be positioned over the guide stud.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Double Insulated Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Clear the Trimmer BIT Area before starting motor Additional Specific Safety RulesPage Symbol Definition Extension Cord Selection MotorFunctional Description Carton ContentsOperation To Install BIT Model 7310 Trimmer AssemblyTo Remove BIT Adjusting SUB-BASE Alignment Adjusting Depth of CUTEdge Guide KIT Flush Trimming Assembling and Adjusting Base and Roller GuideUsing Straight Edge Guide Model 7319 Tilt Base Trimmer AssemblyBevel Trimming Adjusting Tilt Model 7312 Offset Trimmer AssemblyAssembling Offset Base to Motor Operation To Install & Remove BITSUB-BASE Inverted Typical Applications Underscribe 7320 Trimmer AssemblyAdjusting Guide Plate Adjusting BIT ExposureUsing Underscribe Trimmer Troubleshooting Guide Keep Tool Clean MaintenanceFailure to Start LubricationAccessories ServiceReplacement Parts Service and RepairsPORTER-CABLE Limited ONE Year Warranty WarrantyCanadian PORTER-CABLE Delta Service Centers

MODEL 7310 specifications

The Porter-Cable MODEL 7310 is a versatile and user-friendly sander designed to meet the demands of both professional and DIY woodworkers. One of its standout features is its unique sanding system, which utilizes a 3-inch by 21-inch belt for unbeatable efficiency in both large surface areas and intricate detailing. The combination of its powerful motor and adjustable speed settings allows users to customize their sanding experience depending on the task at hand.

One key characteristic of the MODEL 7310 is its ability to deliver a variable speed range, typically ranging from 120 to 400 feet per minute. This flexibility enables users to achieve a smooth finish on various materials, including hardwoods, softwoods, and composites. The sander is equipped with a dust collection system that enhances its usability by minimizing mess. The built-in dust port effectively captures and directs debris away from the work area, ensuring that users can maintain a clean workspace while prolonging the life of the sanding belt.

Another notable feature of the MODEL 7310 is its ergonomic design. The machine includes a cushioned grip that reduces fatigue during prolonged use, allowing for better control and precision. The compact design also makes it lightweight, enhancing maneuverability without sacrificing power. Alongside its comfortable grip, the sander's low profile ensures easy access to tight spaces, such as corners and edges.

Safety is also a priority for Porter-Cable, and the MODEL 7310 is outfitted with important safety features. The sander is designed with a locking mechanism that prevents accidental startup, providing an additional layer of safety for the user. Furthermore, the durable construction of the sander ensures it can withstand the rigors of everyday use, making it a reliable addition to any workshop.

In summary, the Porter-Cable MODEL 7310 stands out in the market due to its high performance, user-friendly features, and robust construction. With its variable speed control, efficient dust collection, ergonomic design, and reliable safety features, it is an excellent choice for anyone seeking a powerful and adaptable sander. Whether you are a seasoned professional or a casual DIY enthusiast, the MODEL 7310 is engineered to deliver exceptional results on any woodworking project.
Top Page Image Contents