Porter-Cable MODEL 7310 instruction manual To Install & Remove BIT, Operation

Page 16

TO INSTALL & REMOVE BIT

D

 

 

 

 

DISCONNECT TOOL FROM

 

 

 

 

 

 

 

 

 

 

 

 

POWER SOURCE.

 

 

 

 

 

 

1.Insert long portion of hex wrench (furnished) through spindle lock hole (see Fig. 10) so that wrench protrudes from both sides of base housing. It may be necessary to rotate spindle by hand to align hole in spindle with holes in housing.

2.Clean and insert bit shank into collet.

Tighten collet nut securely with collet wrench.

C

NEVER TIGHTEN OR LOOSEN COLLET NUT

B

WITH SPINDLE LOCK ENGAGED IN MOTOR

 

SHAFT. TO DO SO MAY DAMAGE DRIVE

A

BELT.

 

3.To remove bit, reverse above procedure.

If bit does not remove easily, tap the bit shank

Fig. 9

with wrench to release bit.

 

 

NEVER TIGHTEN COLLET

 

WITHOUT BIT INSERTED, TO DO

 

SO MAY CAUSE DAMAGE TO

 

COLLET.

 

ADJUSTING DEPTH OF CUT

HEX

 

 

 

DISCONNECT TOOL

WRENCH

 

 

 

FROM

POWER

 

 

 

 

 

SOURCE.

 

 

1. Loosen bit in collet (See TO

 

INSTALL & REMOVE BIT).

 

 

2. Position hex wrench (furnished)

 

Fig. 10

to depth adjusting screw (See

Fig.11).

 

 

3.Hold spindle with fingers and apply light upward pressure on bit (to maintain contact between bit shank and adjusting screw) while turning hex wrench to adjust bit exposure. Turn screw counter-clockwise to increase exposure; turn screw clockwise to decrease exposure.

4.When using long shank bits: The distance from the bottom of the sub- base to the collet may be increased (approximately 3/16") by turning the sub- base over (See Fig.12):

A.Remove three sub-base mounting screws.

B.Turn sub-base over and re-attach using screws removed in step A.

OPERATION

1.Material to be trimmed must overhang the base material by at least 1/8".

2. ALWAYS WEAR SAFETY GLASSES WHILE OPERATING A

LAMINATE TRIMMER.

HEX

WRENCH

SPINDLE

Fig. 11

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorPage Symbol Definition Motor Extension Cord SelectionFunctional Description Carton ContentsOperation To Install BIT Model 7310 Trimmer AssemblyTo Remove BIT Adjusting SUB-BASE Alignment Adjusting Depth of CUTEdge Guide KIT Assembling and Adjusting Base and Roller Guide Flush TrimmingUsing Straight Edge Guide Model 7319 Tilt Base Trimmer AssemblyBevel Trimming Adjusting Tilt Model 7312 Offset Trimmer AssemblyAssembling Offset Base to Motor To Install & Remove BIT OperationSUB-BASE Inverted Underscribe 7320 Trimmer Assembly Typical ApplicationsAdjusting BIT Exposure Adjusting Guide PlateUsing Underscribe Trimmer Troubleshooting Guide Maintenance Keep Tool CleanFailure to Start LubricationService AccessoriesReplacement Parts Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyCanadian PORTER-CABLE Delta Service Centers

MODEL 7310 specifications

The Porter-Cable MODEL 7310 is a versatile and user-friendly sander designed to meet the demands of both professional and DIY woodworkers. One of its standout features is its unique sanding system, which utilizes a 3-inch by 21-inch belt for unbeatable efficiency in both large surface areas and intricate detailing. The combination of its powerful motor and adjustable speed settings allows users to customize their sanding experience depending on the task at hand.

One key characteristic of the MODEL 7310 is its ability to deliver a variable speed range, typically ranging from 120 to 400 feet per minute. This flexibility enables users to achieve a smooth finish on various materials, including hardwoods, softwoods, and composites. The sander is equipped with a dust collection system that enhances its usability by minimizing mess. The built-in dust port effectively captures and directs debris away from the work area, ensuring that users can maintain a clean workspace while prolonging the life of the sanding belt.

Another notable feature of the MODEL 7310 is its ergonomic design. The machine includes a cushioned grip that reduces fatigue during prolonged use, allowing for better control and precision. The compact design also makes it lightweight, enhancing maneuverability without sacrificing power. Alongside its comfortable grip, the sander's low profile ensures easy access to tight spaces, such as corners and edges.

Safety is also a priority for Porter-Cable, and the MODEL 7310 is outfitted with important safety features. The sander is designed with a locking mechanism that prevents accidental startup, providing an additional layer of safety for the user. Furthermore, the durable construction of the sander ensures it can withstand the rigors of everyday use, making it a reliable addition to any workshop.

In summary, the Porter-Cable MODEL 7310 stands out in the market due to its high performance, user-friendly features, and robust construction. With its variable speed control, efficient dust collection, ergonomic design, and reliable safety features, it is an excellent choice for anyone seeking a powerful and adaptable sander. Whether you are a seasoned professional or a casual DIY enthusiast, the MODEL 7310 is engineered to deliver exceptional results on any woodworking project.
Top Page Image Contents