Porter-Cable MODEL 7310 instruction manual Model 7319 Tilt Base Trimmer Assembly, Bevel Trimming

Page 14

5.Remove guide setting gauge from trimmer and install flush trimming bit.

6.Adjust depth of cut so that the straight portion of the bit extends below the trimmer base at least the thickness of the material to be trimmed.

7.Make a trial cut on scrap material. Readjust if necessary.

BEVEL TRIMMING

1.Follow Steps 1 through 5 under FLUSH TRIMMING, except install bevel trimming guide (C) Fig. 4. This guide is identified by the letter “B” molded onto it.

2.Adjust depth of cut so that only the bevel portion of the bit extends below trimmer base at least the thickness of the material to be trimmed.

3.Make a trial cut on scrap material to check alignment. Readjust if necessary.

USING STRAIGHT EDGE GUIDE

The straight edge guide (D) Fig. 4, maybe used with either bit for trimming straight edges.

Assemble it to the guide base and adjust similar to the other guides.

MODEL 7319 TILT BASE TRIMMER ASSEMBLY

Model 7319 Tilt Base Trimmer is completely assembled at the factory. The base is assembled or removed from Model 7301 motor with base locking screw (A) Fig. 6.

NOTE: There is a flat washer (B) Fig. 6, on the locking screw.

Model 7319 Tilt Base is designed for use with 43216PC flush trim bit for trimming into corners. It may also be used with other “self pilot” trim bits for conventional trimming at 90° setting.

C D

A B

Fig. 6

ADJUSTING DEPTH OF CUT

DISCONNECT TOOL FROM POWER SOURCE.

Loosen base locking screw and move motor unit up or down to decrease or increase depth of cut.

It may be necessary with some bits to withdraw bit from collet to obtain maximum depth of cut. When doing this

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorPage Symbol Definition Motor Extension Cord SelectionOperation Carton ContentsFunctional Description To Remove BIT Model 7310 Trimmer AssemblyTo Install BIT Edge Guide KIT Adjusting Depth of CUTAdjusting SUB-BASE Alignment Assembling and Adjusting Base and Roller Guide Flush TrimmingBevel Trimming Model 7319 Tilt Base Trimmer AssemblyUsing Straight Edge Guide Assembling Offset Base to Motor Model 7312 Offset Trimmer AssemblyAdjusting Tilt To Install & Remove BIT OperationSUB-BASE Inverted Underscribe 7320 Trimmer Assembly Typical ApplicationsAdjusting BIT Exposure Adjusting Guide PlateUsing Underscribe Trimmer Troubleshooting Guide Failure to Start MaintenanceKeep Tool Clean LubricationReplacement Parts ServiceAccessories Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyCanadian PORTER-CABLE Delta Service Centers

MODEL 7310 specifications

The Porter-Cable MODEL 7310 is a versatile and user-friendly sander designed to meet the demands of both professional and DIY woodworkers. One of its standout features is its unique sanding system, which utilizes a 3-inch by 21-inch belt for unbeatable efficiency in both large surface areas and intricate detailing. The combination of its powerful motor and adjustable speed settings allows users to customize their sanding experience depending on the task at hand.

One key characteristic of the MODEL 7310 is its ability to deliver a variable speed range, typically ranging from 120 to 400 feet per minute. This flexibility enables users to achieve a smooth finish on various materials, including hardwoods, softwoods, and composites. The sander is equipped with a dust collection system that enhances its usability by minimizing mess. The built-in dust port effectively captures and directs debris away from the work area, ensuring that users can maintain a clean workspace while prolonging the life of the sanding belt.

Another notable feature of the MODEL 7310 is its ergonomic design. The machine includes a cushioned grip that reduces fatigue during prolonged use, allowing for better control and precision. The compact design also makes it lightweight, enhancing maneuverability without sacrificing power. Alongside its comfortable grip, the sander's low profile ensures easy access to tight spaces, such as corners and edges.

Safety is also a priority for Porter-Cable, and the MODEL 7310 is outfitted with important safety features. The sander is designed with a locking mechanism that prevents accidental startup, providing an additional layer of safety for the user. Furthermore, the durable construction of the sander ensures it can withstand the rigors of everyday use, making it a reliable addition to any workshop.

In summary, the Porter-Cable MODEL 7310 stands out in the market due to its high performance, user-friendly features, and robust construction. With its variable speed control, efficient dust collection, ergonomic design, and reliable safety features, it is an excellent choice for anyone seeking a powerful and adaptable sander. Whether you are a seasoned professional or a casual DIY enthusiast, the MODEL 7310 is engineered to deliver exceptional results on any woodworking project.
Top Page Image Contents