Porter-Cable MODEL 7310 Maintenance, Keep Tool Clean, Failure to Start, Lubrication

Page 22

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. No further lubrication is necessary.

BRUSH INSPECTION (If applicable)

For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed by an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE•DELTA FACTORY SERVICE CENTER.

At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes installed, and test the tool for performance.

Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool to the service station for immediate service.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorPage Symbol Definition Motor Extension Cord SelectionFunctional Description Carton ContentsOperation To Install BIT Model 7310 Trimmer AssemblyTo Remove BIT Adjusting SUB-BASE Alignment Adjusting Depth of CUTEdge Guide KIT Assembling and Adjusting Base and Roller Guide Flush TrimmingUsing Straight Edge Guide Model 7319 Tilt Base Trimmer AssemblyBevel Trimming Adjusting Tilt Model 7312 Offset Trimmer AssemblyAssembling Offset Base to Motor To Install & Remove BIT OperationSUB-BASE Inverted Underscribe 7320 Trimmer Assembly Typical ApplicationsAdjusting BIT Exposure Adjusting Guide PlateUsing Underscribe Trimmer Troubleshooting Guide Failure to Start MaintenanceKeep Tool Clean LubricationReplacement Parts ServiceAccessories Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyCanadian PORTER-CABLE Delta Service Centers

MODEL 7310 specifications

The Porter-Cable MODEL 7310 is a versatile and user-friendly sander designed to meet the demands of both professional and DIY woodworkers. One of its standout features is its unique sanding system, which utilizes a 3-inch by 21-inch belt for unbeatable efficiency in both large surface areas and intricate detailing. The combination of its powerful motor and adjustable speed settings allows users to customize their sanding experience depending on the task at hand.

One key characteristic of the MODEL 7310 is its ability to deliver a variable speed range, typically ranging from 120 to 400 feet per minute. This flexibility enables users to achieve a smooth finish on various materials, including hardwoods, softwoods, and composites. The sander is equipped with a dust collection system that enhances its usability by minimizing mess. The built-in dust port effectively captures and directs debris away from the work area, ensuring that users can maintain a clean workspace while prolonging the life of the sanding belt.

Another notable feature of the MODEL 7310 is its ergonomic design. The machine includes a cushioned grip that reduces fatigue during prolonged use, allowing for better control and precision. The compact design also makes it lightweight, enhancing maneuverability without sacrificing power. Alongside its comfortable grip, the sander's low profile ensures easy access to tight spaces, such as corners and edges.

Safety is also a priority for Porter-Cable, and the MODEL 7310 is outfitted with important safety features. The sander is designed with a locking mechanism that prevents accidental startup, providing an additional layer of safety for the user. Furthermore, the durable construction of the sander ensures it can withstand the rigors of everyday use, making it a reliable addition to any workshop.

In summary, the Porter-Cable MODEL 7310 stands out in the market due to its high performance, user-friendly features, and robust construction. With its variable speed control, efficient dust collection, ergonomic design, and reliable safety features, it is an excellent choice for anyone seeking a powerful and adaptable sander. Whether you are a seasoned professional or a casual DIY enthusiast, the MODEL 7310 is engineered to deliver exceptional results on any woodworking project.
Top Page Image Contents