Nibbler Safety Warnings, Symbols, Switch action

GEB028-2

NIBBLER SAFETY WARNINGS

1.Hold the tool firmly.

2.Secure the workpiece firmly.

3.Keep hands away from moving parts.

4.Edges and chips of the workpiece are sharp. Wear gloves. It is also recommended that you put on thickly bottomed shoes to prevent injury.

5.Do not put the tool on the chips of the workpiece. Otherwise it can cause damage and trouble on the tool.

6.Do not leave the tool running. Operate the tool only when hand-held.

7.Always be sure you have a firm footing.

Be sure no one is below when using the tool in high locations.

8.Do not touch the punch, die or the workpiece immediately after operation; they may be extremely hot and could burn your skin.

9.Avoid cutting electrical wires. It can cause serious accident by electric shock.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

USD201-2

Symbols

The followings show the symbols used for tool.

･volts

･amperes

･hertz

･ alternating current

･no load speed

･ Class II Construction

･ revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Permissible cutting thickness

	1.	Stainless steel
		gauge 2.5 mm
		(3/32")
1	2.	Mild steel
1		gauge 3.2 mm
		gauge 3.2 mm
2		(1/8")
2

013355

The thickness of material to be cut depends upon the tensile strength of the material itself. The groove on the die holder acts as a thickness gauge for allowable cutting thickness. Do not attempt to cut any material which will not fit into this groove.

Max.cutting capacities	mm	ga
Steel up to 400 N/mm2	3.2	10
Steel up to 600 N/mm2	2.5	13
Steel up to 800 N/mm2	1.0	20
Aluminum up to 200 N/mm2	3.5	10

006439

Switch action

1	2	1.	Switch trigger
1	2	2.	Lock button
		2.	Lock button

013356

CAUTION:

•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.

•Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool.

To start the tool, simply pull the switch trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then push in the lock button.

To stop the tool from the locked position, pull the switch trigger fully, then release it.

JN3201 specifications

The Makita JN3201 is a robust and versatile electric nibbler designed for efficient and precise cutting of various materials. This lightweight tool is favored by professionals and DIY enthusiasts alike due to its powerful performance and ease of use.

One of the standout features of the Makita JN3201 is its capacity to cut through an array of materials, including sheet metal, aluminum, and steel plates up to 1/8 inch thick. The nibbler operates at a significant speed of 1,500 strokes per minute, making it an ideal choice for tasks that require rapid and accurate cutting. With its compact design, the JN3201 allows for maneuverability in tight spaces, providing optimal control for intricate cuts.

The JN3201 is equipped with a 4.5 amp motor that delivers strong cutting performance while maintaining a lightweight design, weighing in at just 3.5 pounds. This portability is particularly beneficial for extended use, minimizing user fatigue during long projects. Additionally, the ergonomically designed handle ensures a comfortable grip, allowing for precision and reducing strain on the hands.

One of the key technologies incorporated into the Makita JN3201 is its unique nibbler design, which features a bi-metal cutting head. This design allows for the removal of small pieces of material as it cuts, reducing the need for extensive clean-up afterward. The cutting head can be easily adjusted for various angles, enabling users to tackle complicated cutting tasks without difficulty.

For enhanced safety, the JN3201 includes a protective cover that shields the cutting mechanism during operation. This feature is crucial for preventing accidental injuries while ensuring a clean cutting process. Furthermore, the tool's built-in dust blower helps keep the cutting line visible, further enhancing accuracy and efficiency.

In summary, the Makita JN3201 is a powerful electric nibbler equipped with features designed for efficient cutting of various materials. Its lightweight, compact design, combined with a powerful motor and advanced cutting technologies, makes it an ideal tool for both professionals and hobbyists. Whether working on metal roofing, automotive projects, or crafts, the Makita JN3201 delivers outstanding performance, reliability, and precision, making it a vital addition to any tool collection.