3. Hardware Setup
| AC Power |
Warning! | Verify that the power requirement label on your unit matches the line voltage |
| applied. All fixtures must be connected to circuits with a suitable Earth Ground. |
| • To determine the power requirements for a particular fixture, see the label affixed to the back plate |
| of the fixture or refer to the fixture’s specifications chart. |
| • A fixture’s listed current rating is its average current draw under normal conditions. |
| • All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat |
| (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% |
| to 100% switch. |
| • Before applying power to a fixture, check that the source voltage matches the fixture’s |
| requirement. |
| • All fixtures must be connected to circuits with a suitable Earth Ground. |
Power Cable Configuration
CABLE | Pin | International | Screw Color |
|
BROWN | Live | L | Yellow or Brass |
|
BLUE | Neutral | N | Silver |
|
YELLOW/GREEN | Earth | EG (Ground) | Green | |
System Limitations |
|
| ||
VERTICAL PANELS (DOWN) |
|
|
| |
MINIMUM |
| 1 panel = 16 rows of LED clusters or 16 vertical pixels/lines | ||
|
| |||
MAXIMUM WITH 1 DRIVER | 16 panels = 256 rows of LED clusters or 256 vertical pixels/lines | |||
|
| |||
MAXIMUM WITH 2+ DRIVERS | 32 panels = 512 rows of LED clusters or 512 vertical pixels | |||
HORIZONTAL PANELS (ACROSS) |
|
|
| |
MINIMUM |
| 1 panel = 16 columns of LED clusters or 16 horizontal pixels/lines | ||
|
| |||
MAXIMUM WITH 1 DRIVER | 6 panels = 96 columns of LED clusters or 96 horizontal pixels/lines | |||
|
| |||
MAXIMUM WITH 2+ DRIVERS | 48 panels = 768 columns of LED clusters or 768 horizontal pixels | |||
RESOLUTION |
|
|
|
|
MINIMUM |
| 16 pixels X 16 pixels | ||
|
| |||
MAXIMUM WITH 1 DRIVER | 96 pixels X 128 pixels | |||
|
| |||
MAXIMUM WITH 2+ DRIVERS | 768 pixels X 512 pixels | |||
|
|
|
|
|
DV Wall System User Manual | 7 |