RIDGID R888 manual Chamfering, Planing Edges and Making Rabbet Cuts

Page 19

OPERATION

CHAMFERING

See Figure 14.

The planer is designed with a chamfering groove in the front shoe to chamfer edges of boards as shown. Before making a cut on good lumber, practice cutting on scrap lumber to determine the amount to be removed.

Clamp the work securely.

Hold the front handle with your left hand and the rear handle with your right hand.

Place the chamfering groove on the surface to be cut.

Start the planer and let the motor reach maximum speed.

Hold the planer firmly and push it forward into the work, using a slow, steady motion.

Apply downward pressure to keep the planer flat at the beginning and the end of the work surface.

PLANING EDGES AND MAKING RABBET CUTS

The planer comes with an adjustable edge guide for precision edge planing and rabbet cutting. Attach the edge guide to either side of the planer for planing edges. Attach the edge guide to the left side for making rabbet cuts.

ATTACHING THE EDGE GUIDE FOR PLANING EDGES

See Figure 15.

Remove the battery pack from the tool.

Attach the bracket to the desired side of the planer using the knob bolt.

Attach the edge guide to the bracket using the knob nut and the carriage head bolt.

Tighten the knob nut, knob bolt, and carriage head bolt securely.

Reinstall the battery pack.

GROOVE

FRONT

HANDLE

WORKPIECE

CLAMP

Fig. 14

KNOB

BOLT

CARRIAGE HEAD BOLT

BRACKET

EDGE

GUIDE

KNOB

NUT

Fig. 15

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents OPERATOR’S Manual Introduction Table of ContentsPersonal Safety General Safety RulesWork Area Safety Electrical SafetyBattery Tool USE and Care Specific Safety RulesService Safety Rules for Charger Important Safety InstructionsName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesEdge GUIDE/RABBET Guide Depth Adjustment KnobKnow Your Hand Planer Chip ExhaustPacking List AssemblyINSTALLING/REMOVING the Dust BAG UnpackingApplications OperationTo Charge Charge Level IndicatorCharging a HOT Battery Pack Charging a Cool Battery PackLED Function of Ridgid 24V LITHIUM-ION Charger LED Battery RED Green Action Indicator PackVolts, 60 Hz, AC only LED Function of Ridgid NICKEL-CADMIUM Chargers To Remove Battery Pack To Install Battery PackSTARTING/STOPPING the Planer To set the planing depth Planing DepthDust BAG Clamp Workpiece Operating the PlanerPlaning Edges and Making Rabbet Cuts ChamferingAttaching the Edge Guide for Planing Edges Attaching the Edge Guide for Making Rabbet Cuts Planing EdgesMaking Rabbet Cuts Batteries MaintenanceGeneral Maintenance Battery Pack Removal and Preparation for RecyclingSee Figures 18 Replacing BladesReplacing the Belt Cleaning the Chip Exhaust and EMPTY- ING the Dust BAGPage HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information

R888 specifications

The RIDGID R888 is a powerful tool that continues to cement its reputation among professionals and DIY enthusiasts alike. This advanced cordless impact wrench is designed to tackle a wide array of applications, making it a standout choice for both construction and home improvement projects.

One of the key features of the RIDGID R888 is its robust 18V motor, which delivers an impressive torque output. With a torque rating of up to 600 ft-lbs of nut-busting torque, this tool can handle loosening and fastening tasks that require significant force, such as working with heavy machinery or automotive bolts. The ability to deliver high torque in a compact design makes the R888 versatile for various tasks.

The R888 also incorporates advanced brushless motor technology. This not only enhances the tool's efficiency but also extends its overall lifespan compared to traditional brushed motors. The brushless design provides smoother operation, reducing friction and heat buildup. As a result, the tool operates cooler, which is a crucial factor during extended use.

Another standout characteristic of the RIDGID R888 is its ergonomic design. Equipped with a comfortable grip and a lightweight construction, this impact wrench minimizes user fatigue, allowing for longer periods of operation without discomfort. The tool also features an integrated LED light, improving visibility in dark or confined spaces, which is particularly beneficial when working under vehicles or in poorly lit areas.

Moreover, the R888 includes a 3-speed setting and a snug-fit ½ inch anvil, providing versatility for different tasks. The ability to adjust speed allows users to select the appropriate power for a range of jobs, from delicate assembly tasks to heavy-duty applications. Each speed setting is easy to switch, allowing seamless transitions as needed.

Lastly, the RIDGID R888 is backed by the manufacturer’s lifetime service agreement, which includes free parts and service for the life of the tool, underscoring RIDGID’s commitment to quality and customer satisfaction.

In summary, the RIDGID R888 combines powerful performance, innovative technology, and user-friendly design. Its features and characteristics make it an invaluable addition for anyone looking to increase productivity and efficiency in their work.
Top Page Image Contents