RIDGID R888 manual Planing Depth, To set the planing depth

Page 17

OPERATION

AUTOMATIC REAR STAND

See Figure 11.

The planer has been equipped with an automatic rear stand that will prevent the blade from contacting the workbench when not in use. As you begin your planing operation, the stand will automatically retract as it passes over the edge of the workpiece. When setting the planer down on your workbench, the rear stand will automatically pivot down to prevent the blade from making any contact.

WARNING:

Make sure the automatic rear stand operates freely at all times and that the area surrounding the stand is clear of debris. Failure to do so could result in serious personal injury.

PLANING DEPTH

See Figure 12.

Always work from a rough cut to a finish cut. The approximate setting for rough planing is 1/32 in. For finish planing use a setting of approximately 1/64 in. Make test cuts in scrap wood after each adjustment to make sure that the planer is removing the desired amount of wood.

To set the planing depth:

Make sure the lock-off button is in the center position.

NOTE: The switch automatically locks when the lock-off button is not depressed to the left or the right.

Turn the depth adjustment knob to the desired setting.

NOTE: To protect the blades during storage, transporting, etc., set the depth adjustment to 0.

WORKPIECE

AUTOMATIC REAR

STAND

Fig. 11

DEPTH

ADJUSTMENT

KNOB

Fig. 12

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesBattery Tool USE and Care Safety Rules for Charger Important Safety InstructionsName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesKnow Your Hand Planer Depth Adjustment KnobChip Exhaust Edge GUIDE/RABBET GuideINSTALLING/REMOVING the Dust BAG AssemblyUnpacking Packing ListApplications OperationCharging a HOT Battery Pack Charge Level IndicatorCharging a Cool Battery Pack To ChargeLED Function of Ridgid 24V LITHIUM-ION Charger LED Battery RED Green Action Indicator PackVolts, 60 Hz, AC only LED Function of Ridgid NICKEL-CADMIUM Chargers STARTING/STOPPING the Planer To Install Battery PackTo Remove Battery Pack To set the planing depth Planing DepthDust BAG Clamp Workpiece Operating the PlanerAttaching the Edge Guide for Planing Edges ChamferingPlaning Edges and Making Rabbet Cuts Making Rabbet Cuts Planing EdgesAttaching the Edge Guide for Making Rabbet Cuts General Maintenance MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesSee Figures 18 Replacing BladesReplacing the Belt Cleaning the Chip Exhaust and EMPTY- ING the Dust BAGPage DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information

R888 specifications

The RIDGID R888 is a powerful tool that continues to cement its reputation among professionals and DIY enthusiasts alike. This advanced cordless impact wrench is designed to tackle a wide array of applications, making it a standout choice for both construction and home improvement projects.

One of the key features of the RIDGID R888 is its robust 18V motor, which delivers an impressive torque output. With a torque rating of up to 600 ft-lbs of nut-busting torque, this tool can handle loosening and fastening tasks that require significant force, such as working with heavy machinery or automotive bolts. The ability to deliver high torque in a compact design makes the R888 versatile for various tasks.

The R888 also incorporates advanced brushless motor technology. This not only enhances the tool's efficiency but also extends its overall lifespan compared to traditional brushed motors. The brushless design provides smoother operation, reducing friction and heat buildup. As a result, the tool operates cooler, which is a crucial factor during extended use.

Another standout characteristic of the RIDGID R888 is its ergonomic design. Equipped with a comfortable grip and a lightweight construction, this impact wrench minimizes user fatigue, allowing for longer periods of operation without discomfort. The tool also features an integrated LED light, improving visibility in dark or confined spaces, which is particularly beneficial when working under vehicles or in poorly lit areas.

Moreover, the R888 includes a 3-speed setting and a snug-fit ½ inch anvil, providing versatility for different tasks. The ability to adjust speed allows users to select the appropriate power for a range of jobs, from delicate assembly tasks to heavy-duty applications. Each speed setting is easy to switch, allowing seamless transitions as needed.

Lastly, the RIDGID R888 is backed by the manufacturer’s lifetime service agreement, which includes free parts and service for the life of the tool, underscoring RIDGID’s commitment to quality and customer satisfaction.

In summary, the RIDGID R888 combines powerful performance, innovative technology, and user-friendly design. Its features and characteristics make it an invaluable addition for anyone looking to increase productivity and efficiency in their work.
Top Page Image Contents