SECTION 7: VENTING
7.4 Vertical Venting
The vent material must be either porcelain coated tubing 4" (10 cm) O.D. (P/N 9141030D), heat treated aluminized tubing 4" (10 cm) O.D. (P/N 91409408), heat treated aluminized tubing 6" (15 cm) O.D. (P/N E0009105) or single wall flue pipe minimum 26 Ga.
FIGURE 14: Vertical Venting
Condensation will form in the vent pipe. Insulation and additional sealing measures may be required. Length of flue pipe is equal to total of vertical and horizontal length.
Approved
Thimble
Silicone (if applicable)
Rubber Ring
Tee
Drain Cap
1"(2.5 cm)
P.V.C
Description | Part Number |
Tee 4" (10 cm) | 01330203 |
Vent Cap 4" (10 cm) | 90502300 |
Drain Cap 4" (10 cm) | 02718851 |
Approved
Vent Cap
2feet
Minimum
Approved
Thimble
(if applicable)
15