Servicing Instructions | Roberts Gorden EP-200 Series, EP-203

EP-200 SERIES PUMP INSTALLATION, OPERATION AND SERVICE MANUAL

SECTION 8: SERVICING INSTRUCTIONS

WARNING

Severe Injury Hazard

Install pump scroll and inlet assembly before operating high speed rotating impeller.

Keep hands, fingers and clothing away from inlet and outlet.

Install and operate equipment according to installation manual.

Failure to follow these instructions can result in death or severe injury.

WARNING

Electrical Shock Hazard

Disconnect electrical power and gas supply before servicing.

This appliance must be connected

to a properly grounded electrical source.

Failure to follow these instructions can result in death or electrical shock.

Disassembly and removal or replacement of any pump components must be done by a service con- tractor or electrician qualified in the installation and service of gas-fired heating equipment.

Overtorquing can result in a failure of components.

Failure to follow these instructions can compromise pump operation and void warranty.

8.1Pre-Season Maintenance and Annual Inspection

To ensure your safety and years of trouble-free oper- ation of the pump, service and annual inspections must be done by a contractor qualified in the installa- tion and service of gas-fired heating equipment. Disconnect electric and gas supplies before perform- ing service or maintenance.

Before every heating season, a contractor qualified in the installation and service of gas-fired heating equipment must perform a thorough safety inspec- tion of the pump.

For safety and best performance, the electrical, vent- ing, suspensions and overall pump condition are some of the areas requiring inspection.

Please see Page 17, Section 8.3 for suggested items to inspect.

8.2To Change the Motor and/or the Impeller

1.To remove the motor or impeller, the scroll must be opened. Remove the (8) nuts/bolts and insert a knife blade between the scroll halves to cut through the factory applied sealant. Separate the two halves.

2.The impeller can be removed by loosening the

(2) 3/8-24 set screws, removing the 10-32 screw and retainer assembly. With an appropriate wheel puller, remove the impeller.

3.The motor can now be removed, if necessary, by loosening the attachment hardware.

4.Re-assembly of motor/impeller combination require proper alignment. Make sure the impel- ler has a 1/4" (6 mm) clearance off the inside wall of the scroll. Verify proper motor alignment and free rotation.

5.The (2) impeller set screws should be removed and reinstalled with a drop of thread locking sealant and remain unseated during initial re- assembly.

6.Slide the impeller onto the motor shaft end. Apply a drop of thread locking sealant to the threads of the retainer screw/washer assembly. Insert the retainer screw into the shaft so that it bottoms on the end of the shaft and hub of the impeller. Torque to 30 in/lb.

7.Seat the (2) impeller set screws. Torque to 100 in/lbs.

8.Re-attach the scroll halves. Apply a bead of high temperature silicone sealant (600°F) to the scroll halves. Secure with all (7) nuts/bolts. Torque to 150 in/lb.

EP-203, EP-200 Series specifications

The Roberts Gordon EP-200 Series, especially the EP-203 model, is a revolutionary line of infrared heating systems designed for industrial and commercial applications. These heaters are renowned for their efficiency, performance, and innovative features, making them a preferred choice for customers seeking reliable heating solutions.

One of the main features of the EP-200 Series is its advanced infrared heating technology. Unlike traditional heating systems that rely on air convection, infrared heaters warm objects and surfaces directly. This results in faster heating times and a more consistent temperature within the space. The EP-203 model features a unique design that allows for flexibility in installation, whether it is mounted on ceilings, walls, or even used in portable applications.

The EP-203 is engineered for optimal performance, utilizing a high-quality ceramic burner that delivers uniform heat distribution. This technology not only enhances comfort but also reduces energy consumption, making the system exceptionally cost-effective over time. The EP-200 Series is also designed with longevity in mind, utilizing durable materials that withstand the rigors of industrial environments.

Another standout characteristic of the Roberts Gordon EP-200 Series is its straightforward controls. The EP-203 can be easily integrated with advanced control systems, including thermostats and smart building technologies, allowing users to manage heating efficiently and adapt to varying environmental conditions.

Safety is a priority in the design of the EP-200 Series. The EP-203 is equipped with several safety features, including automatic shut-off mechanisms, flame safeguards, and overheat protection. These features ensure not only the safety of the equipment but also the wellbeing of personnel in the vicinity.

Additionally, the EP-200 Series is recognized for its environmental consideration. These heaters operate on clean-burning fuels, minimizing greenhouse gas emissions while providing powerful heating capabilities. This aligns with modern sustainability goals, making it an ideal choice for businesses looking to reduce their carbon footprint.

In summary, the Roberts Gordon EP-200 Series and its EP-203 model represent cutting-edge technology in infrared heating solutions. With features focusing on efficiency, safety, and environmental sustainability, they are well-suited for a variety of applications, ensuring comfort and cost savings for users in the industrial and commercial sectors. These attributes, combined with the brand's reputation for quality and performance, solidify its position in the heating market.