Specifications, English Original instructions

ENGLISH (Original instructions)

SPECIFICATIONS

	Model		HR2621
		Concrete	26 mm (1")
Capacities		Core bit	68 mm (2-11/16")
Capacities		Steel	13 mm (1/2")
		Steel	13 mm (1/2")
		Wood	32 mm (1-1/4")
	No load speed (RPM)		0 - 1,100 /min
	Blows per minute		0 - 4,500 /min
	Overall length		422 mm (16-5/8")
	Net weight		3.1 kg (6.8 lbs)

•Due to our continuing program of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

GEA008-2

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while

operating a power tool. Distractions can cause you to lose control.

Electrical Safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

9.If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.

Personal Safety

10.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

13.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

HR2621 specifications

The Makita HR2621 is a powerful and versatile rotary hammer designed for both professional contractors and DIY enthusiasts. This tool is known for its robust performance, durability, and innovative technologies that make it ideal for heavy-duty applications, particularly in concrete, masonry, and other tough materials.

One of the standout features of the HR2621 is its 26mm (1 inch) capacity for drilling in concrete. It boasts a powerful 800-watt motor that delivers an impressive impact energy of 2.4 Joules, allowing users to drill through even the toughest surfaces with relative ease. This combination of power and efficiency ensures fast drilling and chiseling, making it suitable for a wide range of applications.

The HR2621 is equipped with a 3-mode operation, which includes rotation only, rotation with hammering, and hammering only modes. This versatility enables users to tackle various tasks, from drilling holes to chiseling away materials. The tool also features a variable speed control, ensuring precise operation depending on the specific requirements of the job.

Another notable characteristic of the Makita HR2621 is its lightweight and ergonomic design, weighing in at just 2.9 kilograms (6.4 lbs). This makes it easy to handle and maneuver, reducing operator fatigue during extended use. The rubberized grip enhances comfort and control, ensuring a secure hold even in challenging working conditions.

In terms of durability, the HR2621 incorporates advanced technologies to extend its lifespan. The tool's engineering includes protective features such as a dust-proof design, which prevents dust and debris from entering sensitive mechanisms. Additionally, it has an integrated clutch system that helps prevent gear damage during binding conditions, promoting longevity and reliability.

The HR2621 also supports the use of SDS-Plus shank bits, allowing for quick and easy bit changes without the need for additional tools. This feature significantly enhances the tool's efficiency, enabling users to switch between tasks swiftly.

In conclusion, the Makita HR2621 rotary hammer is a commendable choice for those seeking a reliable and powerful tool for heavy-duty drilling and chipping tasks. With its impressive motor, versatile operation modes, ergonomic design, and durability-enhancing technologies, it stands out as a top contender in its category, delivering outstanding performance while ensuring user comfort and safety.