Awg

14.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

15.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

16.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust- related hazards.

Power tool use and care

17.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

18.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

19.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

20.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

21.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

22.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

23.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions

and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

24.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

25.Follow instruction for lubricating and changing accessories.

26.Keep handles dry, clean and free from oil and grease.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Table 1: Minimum gage for cord

	Volts		Total length of cord in feet

Ampere Rating	120V	25 ft.	50 ft.	100 ft.	150 ft.

	220V - 240V	50 ft.	100 ft.	200 ft.	300 ft.
More Than	Not More Than		AWG
0	6	18	16	16	14
6	10	18	16	14	12
10	12	16	16	14	12
12	16	14	12	Not Recommended
000300

HR2621 specifications

The Makita HR2621 is a powerful and versatile rotary hammer designed for both professional contractors and DIY enthusiasts. This tool is known for its robust performance, durability, and innovative technologies that make it ideal for heavy-duty applications, particularly in concrete, masonry, and other tough materials.

One of the standout features of the HR2621 is its 26mm (1 inch) capacity for drilling in concrete. It boasts a powerful 800-watt motor that delivers an impressive impact energy of 2.4 Joules, allowing users to drill through even the toughest surfaces with relative ease. This combination of power and efficiency ensures fast drilling and chiseling, making it suitable for a wide range of applications.

The HR2621 is equipped with a 3-mode operation, which includes rotation only, rotation with hammering, and hammering only modes. This versatility enables users to tackle various tasks, from drilling holes to chiseling away materials. The tool also features a variable speed control, ensuring precise operation depending on the specific requirements of the job.

Another notable characteristic of the Makita HR2621 is its lightweight and ergonomic design, weighing in at just 2.9 kilograms (6.4 lbs). This makes it easy to handle and maneuver, reducing operator fatigue during extended use. The rubberized grip enhances comfort and control, ensuring a secure hold even in challenging working conditions.

In terms of durability, the HR2621 incorporates advanced technologies to extend its lifespan. The tool's engineering includes protective features such as a dust-proof design, which prevents dust and debris from entering sensitive mechanisms. Additionally, it has an integrated clutch system that helps prevent gear damage during binding conditions, promoting longevity and reliability.

The HR2621 also supports the use of SDS-Plus shank bits, allowing for quick and easy bit changes without the need for additional tools. This feature significantly enhances the tool's efficiency, enabling users to switch between tasks swiftly.

In conclusion, the Makita HR2621 rotary hammer is a commendable choice for those seeking a reliable and powerful tool for heavy-duty drilling and chipping tasks. With its impressive motor, versatile operation modes, ergonomic design, and durability-enhancing technologies, it stands out as a top contender in its category, delivering outstanding performance while ensuring user comfort and safety.

HR2621 specifications