11. | Do not point the tool at any one in the area |
| when operating. The bit could fly out and |
| injure someone seriously. |
12. | Do not touch the bit or parts close to the bit |
| immediately after operation; they may be |
| extremely hot and could burn your skin. |
13. | Some material contains chemicals which may |
| be toxic. Take caution to prevent dust |
| inhalation and skin contact. Follow material |
| supplier safety data. |
FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
Switch action
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
Symbols
1
2
003892
CAUTION:
1.Lock button
2.Switch trigger
The followings show the symbols used for tool.
･volts
･amperes
･hertz
･ alternating current
･ Class II Construction
･ revolutions or reciprocation per minute
･ number of blow
•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
•Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool.
To start the tool, simply pull the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then slide down the lock button.
To stop the tool from the locked position, pull the switch trigger fully, then release it.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Side handle (auxiliary handle)
1
2
5
4 
3
003893
1.Side handle
2.Nut
3.Projecting portion of side handle
4.Notch on set bolt
5.Set bolt
The side handle can be either freely swiveled or secured at one position for use during tool operation. Just loosen the nut to swivel the handle freely.
4