Repair | P 8 / 22 |
<6 > Disassembling quick change drill chuck
(1)Remove ring spring 21. Then, flat washer 24 can be removed from chuck holder. See Fig. 27 and Fig. 28.
(2)Remove leaf spring with No.1R212 "Retaining Ring Plier". Then, steel ball 5.0 can be removed from chuck holder. See Fig. 29.
If it is difficult to remove leaf spring with No.1R212 "Retaining Ring Plier", slightly knock the change cover to the working table several times. Then, leaf spring can be removed. See Fig. 29A.
(3)Remove keyless drill chuck with spacer and change ring from change cover. See Fig. 30.
Flat washer 24
Leaf spring
Ring spring 21
Flat washer 24
Fig. 27
Fig. 28
Steel ball 5.0
Leaf spring
Change cover
Leaf spring
Keyless |
drill chuck |
Spacer |
Change ring |
Change cover |
Fig. 30 |
Fig. 29
Fig. 29A
(4)Remove torsion spring 31 from chuck holder. See Fig. 31.
(5)Remove spacer from chuck holder. See Fig. 32.
(6)Remove flat head screw M6x22 by tuning it clockwise. See Fig. 33.
(7)Remove keyless drill chuck 13 by tuning it counter clockwise. See Fig. 34.
Torsion spring 31
Fig. 31
Spacer
Keyless drill chuck
Fig. 32
Keyless |
drill chuck 13 |
Flat head |
screw M6x22 |
Fig. 33 |
Chuck holder
Hold this part with vise firmly for easy removing of keyless drill chuck.
Fig. 34