Makita HR2450FT specifications Wiring diagram HR2450T

Page 22

Wiring diagram

HR2450T

Fix field lead wire (black) with lead holder as per the illustration.

Fix brush holder's lead wire (red) and field lead wire (white) with lead holder as per the illustration.

*Do not slack brush holder's lead wire (red) between brush holder and

lead holder.

*Put the brush holder lead wire (red) under the field lead wire (white).

Fix field brush holder's lead wire (blue) and field lead wire (black) with lead holder as per the illustration.

Fix lead wires which are passed through this area, with any of these lead holders.

P 22 / 22

Fix field lead wire (black) with lead holder as per the illustration.

Fix noise suppressor's lead wire (clear) with lead holder as per the illustration.

Fix brush holder's lead wire (blue) and field lead wire (black) with lead holder as per the illustration.

*Pass brush holder's lead wire (blue) under the field lead wire (black).

*Do not slack brush holder's lead wire (blue) between brush holder and lead holder.

Fix the following lead wires with this lead holder.

*Brush holder's lead wire (red)

*2 field's lead wires (black)

*Noise suppressor's lead wire (clear)

Noise suppressor

Noise suppressor is not used in some countries

Image 22
Contents Optional accessories SpecificationStandard equipment Repair MakitaAmount Repair Repair Fastening torque for Repair Repair Repair Cover Swash bearing section Repair Ring spring 28 Note Hammer Repair Repair Repair Repair HR2450FT Circuit diagramSwitch FieldWiring diagram HR2450FT HR2450T Wiring diagram HR2450T