Wiring diagram
HR2450FT
Fix field lead wire (black) with lead holder as per the illustration.
Fix brush holder's lead wire (red) and field lead wire (white) with lead holder as per the illustration.
* Do not slack brush holder's lead wire (red) between brush holder and lead holder.
Fix field brush holder's lead wire (blue) and field lead wire (black) with lead holder as per the illustration.
Fix lead wires which are passed through this area, with any of these lead holders.
LED circuit
LED
Fix lead wire (white) of LED
LED
P 20 / 22
Fix field lead wire (black) with lead holder as per the illustration.
Fix noise suppressor's lead wire (clear) with lead holder as per the illustration.
Fix brush holder's lead wire (blue) and field lead wire (black) with lead holder as per the illustration.
*Pass brush holder's lead wire (blue) under the field lead wire (black).
*Do not slack brush holder's lead wire (blue) between brush holder and lead holder.
Fix the following lead wires with this lead holder.
*Brush holder's lead wire (red)
*2 field's lead wires (black)
*Noise suppressor's lead wire (clear)
Noise suppressor
Noise suppressor is not used in some countries
LED circuit
Noise suppressor
Bottom view
of handle portion
LED lead wires (blue or red)
Lead wires of power supply cord, and grounding lead wire (clear)
Pass LED lead wires, lead wires of power supply cord and grounding lead wire as illustrated above.