Miller Electric SRH-503 manual Input Connection Label, Nameplate Safety Symbols, Do Not Lift, ? a

3-2. Input Connection Label
1/96	1		2		3	4	1	Warning! Watch Out! There
								are possible hazards as
								shown by the symbols.
							2	Electric shock from wiring can
								kill.
							3	Disconnect input plug or
								power before working on
								machine.
							4	Read the Owner’s Manual
								before working on this
								machine.
						? V	5	Consult rating label for input
1		2			3			power requirements, and
								check power available at the
								job site − they must match.
							6	Read Owner’s Manual and
		? V						inside labels for connection
		? A						points and procedures.
						5	7	Move jumper links as shown
								on inside label to match
						3		voltage at job site.
							8	Having a loop of extra length,
								connect grounding conductor
					4			first.
							9	Connect line input conductors
						S-179 290
								as shown on inside label −
								double-check all connections,
								jumper link positions, and
								input voltage before applying
	5	6	7	8		9		power.

3-3. Nameplate Safety Symbols

				1	Warning! Watch Out! There
	1		1		are possible hazards as
					shown by the symbols.
				2	Electric shock from welding
					electrode or wiring can kill.
				3	Sparks from arcing electrode
					can cause explosion or fire −
					disconnect cable for process
					not in use.
				4	Read Owner’s Manual for
					connection procedures.
				5	Electric shock from wiring can
2	3	4	5	6	kill.
				6	Disconnect input power
					before working on unit or

making terminal strip connections.

Nameplate D-179 389

3-4. Do Not Lift

1 2 3 4

206 403

1Warning! Watch Out! There are possible hazards as shown by the symbols.

2Falling equipment can cause serious personal injury and equipment damage.

3Do not use handles to lift system. Handles are not designed to support weight of system.

4Use lifting eye to lift unit only, Not running gear. Lift only with proper equipment and correct procedures. Use handle only to move unit.

OM-2236 Page 10