DeWalt D25901 manual Accessory Maintenance fig, Lubrication, Cleaning Optional Accessories

Page 11

ENGLISH

Accessory Maintenance (fig. 7)

Accessory maintenance at the right time guarantees optimal results in application and a long and efficient accessory life.

Grind the chisels on grinding discs. Refer to Figure 9 for the appropriate angles of the following chisels:

j.spade-shaped chisel

k.cold chisel

l.pointed chisel

m.U-shaped chisel

n.hollow chisel

o.mortar chisel

p.toothed chisel

WARNING: These chisels can be reground only a limited number of times. If in doubt, contact your dealer for recommendations.

WARNING: Ensure that the cutting edge does not show discolouration caused by too much pressure. This may impair the hardness of the accessory.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Optional Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product.

Consult your dealer for further information on the appropriate accessories.

Protecting the Environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your DEWALT product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

DEWALT provides a facility for the collection and recycling of DEWALT products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local DEWALT office at the address indicated in this manual. Alternatively, a list of authorised DEWALT repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents D25901 ﺍﻝﻉﺭﺏﻱﺓ ﻡﺕﺭﺝﻡ ﻉﻥ ﺍﻝﺕﻉﻝﻱﻡﺍﺕ ﺍﻝﺃﺹﻝﻱﺓ ﻞﻜﺷ ﻞﻜﺷ ﺵﻙﻝ Congratulations Technical DataDefinitions Safety Guidelines Service Additional Safety Instructions for Demolition HammersPersonal Safety Power Tool USE and CareDescription fig Package ContentsResidual Risks Markings on ToolInserting and Removing SDS Max Accessories fig Soft Start FeatureElectrical Safety Using an Extension CableProper Hand Position fig Setting the Electronic Impact Power Control Dial figSwitching On and Off fig Fitting and Adjusting the Side Handle figProtecting the Environment Accessory Maintenance figCleaning Optional Accessories LubricationDommages corporels graves FélicitationsCaractéristiques techniques Définitions consignes de sécuritéUtilisation ET Entretien DES Outils Électriques Sécurité IndividuelleContenu de l’emballage Emplacement DE LA Date Codée DE Fabrication FIGRisques résiduels Étiquettes sur l’appareilContrôle de la vibration active Réglage de l’énergie de frappe électronique figSécurité électrique Fonction de démarrage en douceurAvertissement n’appliquez pas de lubrifiant sur la machine Installation et réglage de la poignée latérale figUtilisation d’une rallonge Indexation de la position du burin figMise sous et hors tension de l’outil fig Entretien des accessoires figInstructions d’utilisation Position correcte des mains figProtection de l’environnement Accessoires en optionEntretien ﺕﺎﻜﻠﺘﻤﻤﻟﺍ ﺔﻄﺳﻮﺘﻣ ﻭﺃﺎﻬﺑ ﺔﻳﺎﻨﻌﻟﺍﻭ ﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺓﺍﺩﻷﺍ ﻡﺍﺪﺨﺘﺳﺍ ﺔﻣﺪﺨﻟﺍﺉﺩﺎﻬﻟﺍ ﻞﻴﻐﺸﺘﻟﺍ ءﺪﺑ ﺓﺰﻴﻣ ﺮﻳﺬﺤﺗ ﻂﺒﻀﻟﺍﻭ ﻊﻴﻤﺠﺘﻟﺍ ﺕﺎﻴﻠﻤﻋﻢﻴﺤﺸﺘﻟﺍ Page Page Page Iraq N323725 09/13

D25901 specifications

The DeWalt D25901 is a powerful and versatile demolition hammer designed for professionals who demand performance and reliability in heavy-duty applications. This robust tool is engineered to tackle a variety of challenging tasks such as breaking concrete, chipping, and digging, making it an essential asset for contractors, masons, and construction professionals.

One of the standout features of the DeWalt D25901 is its impressive 9.0 amp motor, which delivers high performance and allows the tool to handle even the most demanding tasks with ease. The hammer provides a maximum impact energy of 12.5 joules, making it one of the most effective demolition hammers available on the market. This powerful performance translates into faster work completion and increased productivity on the job site.

An important technology incorporated into the DeWalt D25901 is its unique active vibration control system. This innovative feature significantly reduces the amount of vibration the user experiences, helping to enhance comfort and reduce fatigue during extended use. This is particularly beneficial for professional users who require a tool that can be used for long periods without causing strain or discomfort.

The DeWalt D25901 also boasts a robust construction, featuring a durable housing that can withstand the rigors of heavy use in tough environments. The tool is designed for easy maintenance, with a grease fitting that enables quick lubrication of critical components for improved durability and extended tool life.

In terms of usability, the D25901 is equipped with a two-position side handle, allowing for better control and comfort during operation. The handle can be adjusted for a range of working angles, ensuring optimal handling in tight spaces. Additionally, the demolition hammer features a convenient depth adjustment rod, enabling precise control when chiseling or breaking materials.

The D25901 uses a standard SDS-Max chuck system, providing compatibility with a wide range of accessories and attachments, making it a flexible choice for various applications. This system also facilitates quick bit changes, enhancing overall workflow on the job site.

In summary, the DeWalt D25901 demolition hammer is a powerhouse tool characterized by its robust performance, advanced vibration control technology, and durable construction. Its user-friendly design and ease of maintenance make it an ideal choice for professionals looking for efficiency and reliability in their demolition projects. Whether it’s for breaking through concrete or performing detailed chipping tasks, the D25901 is engineered to deliver results.
Top Page Image Contents