Personal Safety, Power Tool USE and Care, Service

ENGLISH

Use of an RCD reduces the risk of electric shock.

3)PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional Safety Instructions for Demolition Hammers

•Wear ear protectors. Exposure to noise can cause hearing loss.

•Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

•Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Cutting accessory Contacting a “live” wire may make exposed metal parts of the tool “live” and shock the operator.

•Be certain that the material being drilled does not conceal electric or gas service and that their locations have been verified with the utility companies.

•Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. Operating this tool with one hand will result in loss of control. Breaking

D25901 specifications

The DeWalt D25901 is a powerful and versatile demolition hammer designed for professionals who demand performance and reliability in heavy-duty applications. This robust tool is engineered to tackle a variety of challenging tasks such as breaking concrete, chipping, and digging, making it an essential asset for contractors, masons, and construction professionals.

One of the standout features of the DeWalt D25901 is its impressive 9.0 amp motor, which delivers high performance and allows the tool to handle even the most demanding tasks with ease. The hammer provides a maximum impact energy of 12.5 joules, making it one of the most effective demolition hammers available on the market. This powerful performance translates into faster work completion and increased productivity on the job site.

An important technology incorporated into the DeWalt D25901 is its unique active vibration control system. This innovative feature significantly reduces the amount of vibration the user experiences, helping to enhance comfort and reduce fatigue during extended use. This is particularly beneficial for professional users who require a tool that can be used for long periods without causing strain or discomfort.

The DeWalt D25901 also boasts a robust construction, featuring a durable housing that can withstand the rigors of heavy use in tough environments. The tool is designed for easy maintenance, with a grease fitting that enables quick lubrication of critical components for improved durability and extended tool life.

In terms of usability, the D25901 is equipped with a two-position side handle, allowing for better control and comfort during operation. The handle can be adjusted for a range of working angles, ensuring optimal handling in tight spaces. Additionally, the demolition hammer features a convenient depth adjustment rod, enabling precise control when chiseling or breaking materials.

The D25901 uses a standard SDS-Max chuck system, providing compatibility with a wide range of accessories and attachments, making it a flexible choice for various applications. This system also facilitates quick bit changes, enhancing overall workflow on the job site.

In summary, the DeWalt D25901 demolition hammer is a powerhouse tool characterized by its robust performance, advanced vibration control technology, and durable construction. Its user-friendly design and ease of maintenance make it an ideal choice for professionals looking for efficiency and reliability in their demolition projects. Whether it’s for breaking through concrete or performing detailed chipping tasks, the D25901 is engineered to deliver results.