DeWalt D25901 manual Residual Risks, Markings on Tool, Package Contents, Description fig

Page 8

ENGLISH

through or encountering hard materials such as re-bar may be hazardous as well. Tighten the side handle securely before use.

•Ensure the chisel is secured in place before operating the tool.

•In cold-weather conditions or when the tool has not been used for a longer period of time, let the tool run with no load for several minutes before use.

•When working above ground level ensure the area below is clear.

•Do not touch the chisel or the parts close to the chisel immediately after operation, as they may be extremely hot and cause burns to the skin.

•Always direct the power cable to the rear, away from the chisel.

•Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.

Residual Risks

The following risks are inherent to the use of demolition hammers:

–Injuries caused by touching the hot parts of the tool.

In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:

–Impairment of hearing.

–Risk of squeezing fingers when changing the accessory.

–Health hazards caused by breathing dust developed when working in concrete and/or masonry.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The date code (g), which also includes the year of manufacture, is printed into the housing.

Example:

2013 XX XX

Year of Manufacture

Package Contents

The package contains:

1Demolition hammer

1Side handle

1Pointed chisel

1Plastic case

1Instruction manual

1Exploded drawing

•Check for damage to the tool, parts or accessories which may have occurred during transport.

•Take the time to thoroughly read and understand this manual prior to operation.

Description (fig. 1)

WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.

a.On/off switch

b.Main handle

c.Electronic impact energy control dial

d.Chisel position index collar

e.Tool holder/sleeve

f.Side handle

INTENDED USE

The D25901 heavy-duty demolition hammer is designed for heavy-duty demolition, chipping and chasing applications.

DO NOT use under wet conditions or in presence of flammable liquids or gases.

These heavy-duty demolition hammers are professional power tools. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

•This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents D25901 ﺍﻝﻉﺭﺏﻱﺓ ﻡﺕﺭﺝﻡ ﻉﻥ ﺍﻝﺕﻉﻝﻱﻡﺍﺕ ﺍﻝﺃﺹﻝﻱﺓ ﻞﻜﺷ ﻞﻜﺷ ﺵﻙﻝ Congratulations Technical DataDefinitions Safety Guidelines Additional Safety Instructions for Demolition Hammers Personal SafetyPower Tool USE and Care ServicePackage Contents Residual RisksMarkings on Tool Description figSoft Start Feature Electrical SafetyUsing an Extension Cable Inserting and Removing SDS Max Accessories figSetting the Electronic Impact Power Control Dial fig Switching On and Off figFitting and Adjusting the Side Handle fig Proper Hand Position figAccessory Maintenance fig Cleaning Optional AccessoriesLubrication Protecting the EnvironmentFélicitations Caractéristiques techniquesDéfinitions consignes de sécurité Dommages corporels gravesSécurité Individuelle Utilisation ET Entretien DES Outils ÉlectriquesEmplacement DE LA Date Codée DE Fabrication FIG Risques résiduelsÉtiquettes sur l’appareil Contenu de l’emballageRéglage de l’énergie de frappe électronique fig Sécurité électriqueFonction de démarrage en douceur Contrôle de la vibration activeInstallation et réglage de la poignée latérale fig Utilisation d’une rallongeIndexation de la position du burin fig Avertissement n’appliquez pas de lubrifiant sur la machineEntretien des accessoires fig Instructions d’utilisationPosition correcte des mains fig Mise sous et hors tension de l’outil figProtection de l’environnement Accessoires en optionEntretien ﺔﻄﺳﻮﺘﻣ ﻭﺃ ﺕﺎﻜﻠﺘﻤﻤﻟﺍﺔﻣﺪﺨﻟﺍ ﺎﻬﺑ ﺔﻳﺎﻨﻌﻟﺍﻭ ﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺓﺍﺩﻷﺍ ﻡﺍﺪﺨﺘﺳﺍﺉﺩﺎﻬﻟﺍ ﻞﻴﻐﺸﺘﻟﺍ ءﺪﺑ ﺓﺰﻴﻣ ﻂﺒﻀﻟﺍﻭ ﻊﻴﻤﺠﺘﻟﺍ ﺕﺎﻴﻠﻤﻋ ﺮﻳﺬﺤﺗﻢﻴﺤﺸﺘﻟﺍ Page Page Page Iraq N323725 09/13

D25901 specifications

The DeWalt D25901 is a powerful and versatile demolition hammer designed for professionals who demand performance and reliability in heavy-duty applications. This robust tool is engineered to tackle a variety of challenging tasks such as breaking concrete, chipping, and digging, making it an essential asset for contractors, masons, and construction professionals.

One of the standout features of the DeWalt D25901 is its impressive 9.0 amp motor, which delivers high performance and allows the tool to handle even the most demanding tasks with ease. The hammer provides a maximum impact energy of 12.5 joules, making it one of the most effective demolition hammers available on the market. This powerful performance translates into faster work completion and increased productivity on the job site.

An important technology incorporated into the DeWalt D25901 is its unique active vibration control system. This innovative feature significantly reduces the amount of vibration the user experiences, helping to enhance comfort and reduce fatigue during extended use. This is particularly beneficial for professional users who require a tool that can be used for long periods without causing strain or discomfort.

The DeWalt D25901 also boasts a robust construction, featuring a durable housing that can withstand the rigors of heavy use in tough environments. The tool is designed for easy maintenance, with a grease fitting that enables quick lubrication of critical components for improved durability and extended tool life.

In terms of usability, the D25901 is equipped with a two-position side handle, allowing for better control and comfort during operation. The handle can be adjusted for a range of working angles, ensuring optimal handling in tight spaces. Additionally, the demolition hammer features a convenient depth adjustment rod, enabling precise control when chiseling or breaking materials.

The D25901 uses a standard SDS-Max chuck system, providing compatibility with a wide range of accessories and attachments, making it a flexible choice for various applications. This system also facilitates quick bit changes, enhancing overall workflow on the job site.

In summary, the DeWalt D25901 demolition hammer is a powerhouse tool characterized by its robust performance, advanced vibration control technology, and durable construction. Its user-friendly design and ease of maintenance make it an ideal choice for professionals looking for efficiency and reliability in their demolition projects. Whether it’s for breaking through concrete or performing detailed chipping tasks, the D25901 is engineered to deliver results.
Top Page Image Contents