AWARNING: When servicing, use only Identlcel Craftsman replacement paKs. Use of any other part may create a hazard or cause product damage.
_lb WARNING: Do not at anytime lat brake fluids, gasoline,
etc. come in contact with plastic pans. They contain
chemicals that can damage, weaken or destroy plastic.
FLUORESCENT TUBE REPLACEMENT
See Figure 4.
When purchasingreplacement fluorescent tube, request recommendedpart number 7819602. See Figure5.
TO REPLACE FLUORESCENT TUBE;
•Remove battery pack from workllght. See Page 8.
•Remove screwto release lens cover. Remove lens cover by pullingforward and lifting from the housing.
•To remove old fluorescent tube from spdng, gently grasp the lower edge of the rubber cushionand sides of bulb, Carefully work tube in a
PULL LENS COVER | RUBBER |
FORWARD TO REMOVE | CUSHION |
SCREW |
|
LENS COVER
Do not abase powertools. Abusive practicescan damage tool as well as workplece.
AWARNING: Do not attempt to modifythis worklight or create accessories not recommendedfor use with
this worldlght.Any such alteration or modificationIs misuse and could result tn a hazardous condition leading to possible seriouspersonalinjury.
Remove rubbercushionfrom oldfluorescenttube and place on top of new tube, rounded edge facing outward,
•Insert new fluorescenttube in spdng by aligning prongs on tube with holes In tube socketarea, Gently push down on base of new tuba untilfully engaged. Do not force tube into place.
•Replace lens cover by slidinglower edge into housing. Align screw holes at top, With a hand tool, tighten screw. Do not use drtllincluded tn kitto tighten screw, as drilltorque may damage lens cover.
•Replace battery pack.
FLUORESCENT TUBE | _J | BULB | Fi_.5 |
|
| SOCKET AREA |