Makita GA4030, GA5030, GA4530 instruction manual Specifications, General Safety Rules

Page 2

ENGLISH (Original instructions)

SPECIFICATIONS

Model

GA4030

GA4530

GA5030

Wheel diameter

100mm (4")

115mm (4-1/2")

125mm (5")

No load speed (RPM)

11,000/min

11,000/min

11,000/min

Overall length

266 mm (10-1/2")

266 mm (10-1/2")

266 mm (10-1/2")

Net weight

1.7 kg (3.7 lbs)

1.8 kg (4.0 lbs)

1.8 kg (4.0 lbs)

Spindle thread

M10 x 1.25

5/8"

5/8"

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

GEA004-2

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while

operating a power tool. Distractions can cause you to lose control.

Electrical Safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords

increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal Safety

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

11.Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

12.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

14.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

15.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Angle Grinder Meuleuse dAngle Esmeriladora Angular Specifications General Safety Rules120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Specific Safety RulesMinimum gage for cord Ampere Rating Volts Shaft lock SymbolsFunctional Description Installing side grip handle AssemblySwitch action Installing or removing wheel guard Operation Installing or removing flex wheel optional accessoryInstalling or removing abrasive disc optional accessory Grinding and sanding operationOperation with wire cup brush optional accessory MaintenanceAccessories Operation with wire wheel brush optional accessory009438 Makita Limited ONE Year Warranty Règles de sécurité générales Conservez CE Mode DemploiSpécifications La présence de poussière dans lair Règles DE Sécurité Particulières Blocage de larbre SymbolesDescription DU Fonctionnement InterrupteurAssemblage Installation de la poignée latérale poignéeInstallation ou retrait du carter de meule Utilisation Opérations de meulage et de ponçageAccessoires Entretien009438 Garantie Limitée D’UN AN Makita Guarde Estas Instrucciones EspecificacionesNormas Generales DE Seguridad Reduce los riesgos relacionados con el polvo 12 a Normas Específicas DE Seguridad Advertencias y precaucionesMás de No más de Calibre del cable AWG 10 a 16 a No se recomiendaBloqueo del eje Descripción DEL FuncionamientoSímbolos Accionamiento del interruptorInstalación o desmontaje del protector guarda de disco EnsambleInstalación de la empuñadura lateral mango Operación con carda de alambres accesorio opcional OperaciónOperación de esmerilado y lijado Mantenimiento Accesorios009438 Política de garantía Advertencia
Related manuals
Manual 13 pages 41.19 Kb

GA4030, GA4530, GA5030 specifications

Makita is renowned for its high-performance power tools, and the GA5030, GA4530, and GA4030 angle grinders are no exception. These models exemplify Makita's commitment to innovation, durability, and user-friendly design, making them ideal for both professional tradespeople and DIY enthusiasts.

The Makita GA5030 is a compact and versatile angle grinder equipped with a powerful 5-inch wheel. One of its standout features is its lightweight design, which minimizes fatigue during prolonged use. The GA5030 boasts an 8.5-amp motor capable of delivering up to 11,000 RPM, providing swift and efficient material removal. This model also integrates a labrynth construction that seals and protects the motor and bearings from dust and debris, enhancing the tool’s longevity. Additionally, its ergonomic rubberized grip ensures comfort and control, making it suitable for a variety of applications, from metalworking to masonry.

Moving onto the GA4530, this 4.5-inch angle grinder balances power and portability. Like the GA5030, it is powered by a robust 7.5-amp motor that generates a no-load speed of 10,000 RPM. Its compact design allows for easier handling in tight spaces, making it ideal for both home projects and professional jobs. An important feature of the GA4530 is the protective cover that can be adjusted without tools, allowing for quick changes based on the job at hand. Moreover, this model includes an automatic shut-off carbon brush system that extends the life of the motor, ensuring lasting performance.

Lastly, the GA4030 serves as an excellent choice for those seeking a smaller, yet powerful tool. This 4-inch angle grinder is equipped with a 6.0-amp motor capable of reaching speeds up to 10,000 RPM. The GA4030’s slim body design allows for easy handling, while its rubberized grip provides added comfort and reduces vibrations. This model also features a metal gear housing for increased durability, making it suitable for heavy-duty applications.

In summary, the Makita GA5030, GA4530, and GA4030 are outstanding angle grinders, each offering unique features and capabilities to cater to various needs. With their powerful motors, durable construction, and user-friendly designs, these tools reflect Makita’s high standards in professional-grade equipment. Whether you are a seasoned professional or a weekend DIYer, these grinders will undoubtedly enhance your workflow and deliver exceptional results.
Top Page Image Contents