Makita GA5030, GA4530, GA4030 Specific Safety Rules, Minimum gage for cord Ampere Rating Volts

Page 3

Power tool use and care

16.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

17.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

19.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

20.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

21.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

22.Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use

of the power tool for operations different from those intended could result in a hazardous situation.

Service

23.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

24.Follow instruction for lubricating and changing accessories.

25.Keep handles dry, clean and free from oil and

grease.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Table 1: Minimum gage for cord

Ampere Rating

Volts

 

Total length of cord in feet

 

 

 

120 V

25 ft.

 

50 ft.

100 ft.

 

150 ft.

More Than

Not More Than

 

 

 

AWG

 

 

 

 

 

 

 

 

 

 

 

 

0

6

 

18

 

16

16

 

14

 

 

 

 

 

 

 

 

 

6

10

 

18

 

16

14

 

12

10

12

 

16

 

16

14

 

12

12

16

 

14

 

12

Not Recommended

000173

USB005-5

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to grinder safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.

1.Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments.

2.Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.

3.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

4.When using depressed center grinding wheels, be sure to use only fiberglass-reinforced wheels.

5.Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses.

6.Check the wheel carefully for cracks or damage before operation. Replace cracked or damaged wheel immediately. Run the tool (with guard) at no load for about a minute,

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Angle Grinder Meuleuse dAngle Esmeriladora Angular General Safety Rules SpecificationsSpecific Safety Rules Minimum gage for cord Ampere Rating Volts120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Symbols Functional DescriptionShaft lock Assembly Switch action Installing or removing wheel guardInstalling side grip handle Grinding and sanding operation Installing or removing flex wheel optional accessoryInstalling or removing abrasive disc optional accessory OperationOperation with wire wheel brush optional accessory MaintenanceAccessories Operation with wire cup brush optional accessory009438 Makita Limited ONE Year Warranty Conservez CE Mode Demploi SpécificationsRègles de sécurité générales La présence de poussière dans lair Règles DE Sécurité Particulières Interrupteur SymbolesDescription DU Fonctionnement Blocage de larbreInstallation de la poignée latérale poignée Installation ou retrait du carter de meuleAssemblage Opérations de meulage et de ponçage UtilisationEntretien Accessoires009438 Garantie Limitée D’UN AN Makita Especificaciones Normas Generales DE SeguridadGuarde Estas Instrucciones Reduce los riesgos relacionados con el polvo 16 a No se recomienda Normas Específicas DE Seguridad Advertencias y precaucionesMás de No más de Calibre del cable AWG 10 a 12 aAccionamiento del interruptor Descripción DEL FuncionamientoSímbolos Bloqueo del ejeEnsamble Instalación de la empuñadura lateral mangoInstalación o desmontaje del protector guarda de disco Operación Operación de esmerilado y lijadoOperación con carda de alambres accesorio opcional Accesorios Mantenimiento009438 Política de garantía Advertencia
Related manuals
Manual 13 pages 41.19 Kb

GA4030, GA4530, GA5030 specifications

Makita is renowned for its high-performance power tools, and the GA5030, GA4530, and GA4030 angle grinders are no exception. These models exemplify Makita's commitment to innovation, durability, and user-friendly design, making them ideal for both professional tradespeople and DIY enthusiasts.

The Makita GA5030 is a compact and versatile angle grinder equipped with a powerful 5-inch wheel. One of its standout features is its lightweight design, which minimizes fatigue during prolonged use. The GA5030 boasts an 8.5-amp motor capable of delivering up to 11,000 RPM, providing swift and efficient material removal. This model also integrates a labrynth construction that seals and protects the motor and bearings from dust and debris, enhancing the tool’s longevity. Additionally, its ergonomic rubberized grip ensures comfort and control, making it suitable for a variety of applications, from metalworking to masonry.

Moving onto the GA4530, this 4.5-inch angle grinder balances power and portability. Like the GA5030, it is powered by a robust 7.5-amp motor that generates a no-load speed of 10,000 RPM. Its compact design allows for easier handling in tight spaces, making it ideal for both home projects and professional jobs. An important feature of the GA4530 is the protective cover that can be adjusted without tools, allowing for quick changes based on the job at hand. Moreover, this model includes an automatic shut-off carbon brush system that extends the life of the motor, ensuring lasting performance.

Lastly, the GA4030 serves as an excellent choice for those seeking a smaller, yet powerful tool. This 4-inch angle grinder is equipped with a 6.0-amp motor capable of reaching speeds up to 10,000 RPM. The GA4030’s slim body design allows for easy handling, while its rubberized grip provides added comfort and reduces vibrations. This model also features a metal gear housing for increased durability, making it suitable for heavy-duty applications.

In summary, the Makita GA5030, GA4530, and GA4030 are outstanding angle grinders, each offering unique features and capabilities to cater to various needs. With their powerful motors, durable construction, and user-friendly designs, these tools reflect Makita’s high standards in professional-grade equipment. Whether you are a seasoned professional or a weekend DIYer, these grinders will undoubtedly enhance your workflow and deliver exceptional results.
Top Page Image Contents