Makita GA4530, GA5030, GA4030 instruction manual Symbols, Functional Description, Shaft lock

Page 4

holding tool away from others. If wheel is flawed, it will likely separate during this test.

7.Use only flanges specified for this tool.

8.Be careful not to damage the spindle, the flange (especially the installing surface) or the lock nut. Damage to these parts could result in wheel breakage.

9.NEVER use tool with wood cutting blades or other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury.

10.Hold the tool firmly.

11.Keep hands away from rotating parts.

12.Make sure cord is clear of wheel. Do not wrap cord around your arm or wrist. If control of tool is lost, cord may become wrapped around you and cause personal injury.

13.Make sure the wheel is not contacting the workpiece before the switch is turned on.

14.Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or wobbling that could indicate poor installation or a poorly balanced wheel.

15.Use the specified surface of the wheel to perform the grinding.

16.Watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or flammable materials.

17.Do not leave the tool running. Operate the tool only when hand-held.

18.Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin.

19.ALWAYS wear proper apparel including long sleeve shirts, leather gloves and shop aprons to protect skin from contact with hot grindings.

20.Use of this tool to grind or sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection.

21.After using the tool, make sure the wheel rotation comes to a complete stop before setting the tool down. Setting the tool down with the wheel rotating can cause personal injury.

22.NEVER USE Stone Cup type wheels with this grinder. This grinder is not designed for these types of wheels and the use of such a product may result in serious personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

USD201-2

Symbols

The followings show the symbols used for tool.

volts

amperes

hertz

alternating current

no load speed

Class II Construction

revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Shaft lock

1

1. Shaft lock

 

 

009422

CAUTION:

Never actuate the shaft lock when the spindle is

moving. The tool may be damaged.

Press the shaft lock to prevent spindle rotation when installing or removing accessories.

4

Image 4
Contents Angle Grinder Meuleuse dAngle Esmeriladora Angular Specifications General Safety RulesMinimum gage for cord Ampere Rating Volts Specific Safety Rules120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Functional Description SymbolsShaft lock Switch action Installing or removing wheel guard AssemblyInstalling side grip handle Installing or removing flex wheel optional accessory Installing or removing abrasive disc optional accessoryOperation Grinding and sanding operationMaintenance AccessoriesOperation with wire cup brush optional accessory Operation with wire wheel brush optional accessory009438 Makita Limited ONE Year Warranty Spécifications Conservez CE Mode DemploiRègles de sécurité générales La présence de poussière dans lair Règles DE Sécurité Particulières Symboles Description DU FonctionnementBlocage de larbre InterrupteurInstallation ou retrait du carter de meule Installation de la poignée latérale poignéeAssemblage Utilisation Opérations de meulage et de ponçageAccessoires Entretien009438 Garantie Limitée D’UN AN Makita Normas Generales DE Seguridad EspecificacionesGuarde Estas Instrucciones Reduce los riesgos relacionados con el polvo Normas Específicas DE Seguridad Advertencias y precauciones Más de No más de Calibre del cable AWG 10 a12 a 16 a No se recomiendaDescripción DEL Funcionamiento SímbolosBloqueo del eje Accionamiento del interruptorInstalación de la empuñadura lateral mango EnsambleInstalación o desmontaje del protector guarda de disco Operación de esmerilado y lijado OperaciónOperación con carda de alambres accesorio opcional Mantenimiento Accesorios009438 Política de garantía Advertencia
Related manuals
Manual 13 pages 41.19 Kb

GA4030, GA4530, GA5030 specifications

Makita is renowned for its high-performance power tools, and the GA5030, GA4530, and GA4030 angle grinders are no exception. These models exemplify Makita's commitment to innovation, durability, and user-friendly design, making them ideal for both professional tradespeople and DIY enthusiasts.

The Makita GA5030 is a compact and versatile angle grinder equipped with a powerful 5-inch wheel. One of its standout features is its lightweight design, which minimizes fatigue during prolonged use. The GA5030 boasts an 8.5-amp motor capable of delivering up to 11,000 RPM, providing swift and efficient material removal. This model also integrates a labrynth construction that seals and protects the motor and bearings from dust and debris, enhancing the tool’s longevity. Additionally, its ergonomic rubberized grip ensures comfort and control, making it suitable for a variety of applications, from metalworking to masonry.

Moving onto the GA4530, this 4.5-inch angle grinder balances power and portability. Like the GA5030, it is powered by a robust 7.5-amp motor that generates a no-load speed of 10,000 RPM. Its compact design allows for easier handling in tight spaces, making it ideal for both home projects and professional jobs. An important feature of the GA4530 is the protective cover that can be adjusted without tools, allowing for quick changes based on the job at hand. Moreover, this model includes an automatic shut-off carbon brush system that extends the life of the motor, ensuring lasting performance.

Lastly, the GA4030 serves as an excellent choice for those seeking a smaller, yet powerful tool. This 4-inch angle grinder is equipped with a 6.0-amp motor capable of reaching speeds up to 10,000 RPM. The GA4030’s slim body design allows for easy handling, while its rubberized grip provides added comfort and reduces vibrations. This model also features a metal gear housing for increased durability, making it suitable for heavy-duty applications.

In summary, the Makita GA5030, GA4530, and GA4030 are outstanding angle grinders, each offering unique features and capabilities to cater to various needs. With their powerful motors, durable construction, and user-friendly designs, these tools reflect Makita’s high standards in professional-grade equipment. Whether you are a seasoned professional or a weekend DIYer, these grinders will undoubtedly enhance your workflow and deliver exceptional results.