Makita GA9050R, GA7050R Symbols, Functional Description, Shaft lock, Switch action

Page 4

8.Be careful not to damage the spindle, the flange (especially the installing surface) or the lock nut. Damage to these parts could result in wheel breakage.

9.NEVER use tool with wood cutting blades or other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury.

10.Hold the tool firmly.

11.Keep hands away from rotating parts.

12.Make sure cord is clear of wheel. Do not wrap cord around your arm or wrist. If control of tool is lost, cord may become wrapped around you and cause personal injury.

13.Make sure the wheel is not contacting the workpiece before the switch is turned on.

14.Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or wobbling that could indicate poor installation or a poorly balanced wheel.

15.Use the specified surface of the wheel to perform the grinding.

16.Watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or flammable materials.

17.Do not leave the tool running. Operate the tool only when hand-held.

18.Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin.

19.ALWAYS wear proper apparel including long sleeve shirts, leather gloves and shop aprons to protect skin from contact with hot grindings.

20.Use of this tool to grind or sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection.

21.After using the tool, make sure the wheel rotation comes to a complete stop before setting the tool down. Setting the tool down with the wheel rotating can cause personal injury.

22.NEVER USE Stone Cup type wheels with this grinder. This grinder is not designed for these types of wheels and the use of such a product may result in serious personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

USD292-2

Symbols

The followings show the symbols used for tool.

･volts

･amperes

･hertz

･ alternating current

･alternating or direct current

･no load speed

･ Class II Construction

･ revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Shaft lock

CAUTION:

• Never actuate the shaft lock when the spindle is moving. The tool may be damaged.

1

1. Shaft lock

 

010639

Press the shaft lock to prevent spindle rotation when installing or removing accessories.

Switch action

CAUTION:

•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.

•Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Angle Grinder Meuleuse dAngle Esmeriladora Angular General Safety Rules For All Tools SpecificationsEnglish Original instructions Minimum gage for cord Ampere Rating Volts Specific Safety Rules120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Symbols Switch actionFunctional Description Shaft lockAssembly Installing side grip handleInstalling or removing abrasive disc optional accessory Installing or removing flex wheel optional accessoryFor tool with clamp lever type wheel guard Operation with wire cup brush optional accessory Operation with wire wheel brush optional accessoryOperation Grinding and sanding operationAccessories MaintenanceReplacing carbon brushes 011647 Makita Limited ONE Year Warranty Warranty PolicyConservez CE Mode Demploi Français Mode d’emploi originalSpécifications Règles de sécurité généralesNon recommandé Règles DE Sécurité Particulières Symboles Description DU FonctionnementBlocage de larbre InterrupteurInstallation de la poignée latérale poignée Assemblage010645 Utilisation Opérations de meulage et de ponçageRemplacement des charbons AccessoiresEntretien 011647 Garantie Limitée D’UN AN Makita Politique de garantieEspecificaciones Normas Generales DE SeguridadPara todas las herramientas Guarde Estas InstruccionesPage Normas Específicas DE Seguridad Advertencias y precauciones Más de No más de Calibre del cable AWG 10 a12 a 16 a No se recomiendaSímbolos Descripción DEL FuncionamientoBloqueo del eje Accionamiento del interruptorEnsamble Instalación de la empuñadura lateral mangoNota Operación de esmerilado y lijado OperaciónOperación con carda de alambres accesorio opcional Mantenimiento Operación con disco de cepillo de alambresAccesorio opcional Reemplazamiento de las escobillas de carbónAccesorios 011647 Política de garantía Advertencia

GA7050, GA7050R, GA9050, GA9050R specifications

The Makita GA9050R, GA9050, GA7050R, and GA7050 are powerful angle grinders designed for professionals and DIY enthusiasts alike. These tools exemplify Makita's commitment to quality, performance, and safety, making them ideal for a wide range of applications, from metal fabrication to masonry work.

Starting with the GA9050 and GA9050R models, both boast a robust 2200W motor that delivers high performance and efficiency. The GA9050R features a soft start function, which reduces the initial torque and prevents sudden movements when starting up, ensuring greater user control. Both models have a large trigger switch for easy operation, even while wearing gloves. The last chance reset feature on the GA9050R further enhances safety by automatically switching off the tool after an accidental power interruption.

The GA7050 and GA7050R are slightly lighter, with a powerful 1500W motor, making them perfect for lighter applications without compromising on performance. The GA7050R model includes advanced electronic circuitry, offering overload protection and a speed control feature, which allows users to adjust the RPM to match different materials and tasks. This is particularly useful for intricate grinding and polishing jobs.

All four models share a durable design, featuring a protective cover that can be easily adjusted without the use of tools, enhancing user convenience. The gear housing is also built to withstand the rigors of professional use, ensuring longevity in demanding environments. The ergonomic design, coupled with a rubberized grip, provides added comfort during extended use, reducing fatigue.

Makita has integrated advanced cooling systems in these models, allowing for continuous operation without overheating. The models also feature a dust-proof structure that protects internal components, ensuring optimal performance even in dusty conditions.

In summary, the Makita GA9050R, GA9050, GA7050R, and GA7050 are exceptional angle grinders that combine power, safety, and user-friendly features. With their innovative technologies, durable construction, and ergonomic designs, these tools are perfect for both professionals and hobbyists looking to tackle tough grinding and cutting tasks with confidence. Whether for heavy-duty industrial applications or home improvement projects, these Makita models deliver reliable performance and efficiency.
Top Page Image Contents