Spindle Base
Adjustment
The handwheel adjusts the main spindle base up or down, as needed.
1.Unlock the spindle locking handle shown in
Figure 18.
2.Turn the handwheel to decrease or increase the spindle base height from the table as shown in Figure 17.
Figure 17. Handwheel, with height scale
to left.
3.The height scale on the left makes keeping track of the spindle height simple.
4.Use the locking handle on the other side of the head to lock in the spindle height adjustments as shown in Figure 18.
Figure 18. Locking handle.
5.Position the spindle base on the highest setting allowable. It is safer to adjust the spindle base down to the correct depth of cut. If the spindle base is too low, you run the risk of the router bit hitting the table when activating the foot pedal.
Adjust the spindle base to the highest set- ting before operating the router. If the spin- dle base is set too low, you run the risk of the router bit hitting the table during opera- tion. Serious personal injury could occur.
G8030 3 H.P. Overarm Router |