Cisco Systems ASR1000 manual Cisco ASR 1004 AC Power Supply LEDs and Connector

Page 22

Chapter 2 Cisco ASR 1000 Series Routers Components

Cisco ASR 1000 Series Router Power Supplies

Power supply modules with internal fan modules install into the rear of the chassis. These modules contain handles to ease installation and removal. The AC power supply has a front panel mounted switch that powers on and off the power supply. This switch will not disconnect the AC line, but will act only as a standby switch to the power supply. The front panel includes a mechanical guard to prevent the standby switch from being tripped due to accidental contact.

Guide pins located at the rear of these modules help center locate the modules and reduce stress to the midplane and module mounted connectors. Four captive screws (tool operated latches) are provided on the modules face plate (chassis rear) to secure these modules into the chassis.

Cisco ASR 1004 AC Power Supply LEDs and Connector

Figure 2-12shows the AC power supplies at the rear of the Cisco ASR 1004 Router.The Cisco ASR 1004 Router supports up to two power supplies. The power supply LEDs and connectors on the rear of the chassis are described in Table 2-13.

Figure 2-12 Cisco ASR 1004 Router AC Power Supply

1

 

2

 

 

OUTPUT INPUT FAN

 

FAIL

OK

OK

100V-240V~ 12A-5A

ALARMS

 

 

50-60Hz

 

 

60V

 

 

 

 

 

 

1A MAX

 

 

 

OUTPUT INPUT FAN

 

FAIL

OK

OK

100V-240V~ 12A-5A

ALARMS

 

 

50-60Hz

 

 

60V

 

 

 

 

 

 

1A MAX

 

 

 

 

 

280184

5

4

3

 

1

AC power supply Standby switch (standby

4

AC power supply fan

 

symbol is a broken circle with a vertical line

 

 

 

through the top of it)

 

 

 

 

 

 

2

AC power supply LEDs

5

AC power inlet

 

 

 

 

3

DB-25 alarm connector

6

AC power supply handle

 

 

 

 

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

2-22

OL-13208-01

 

 

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Cisco ASR 1000 Series Route Processor A P T E RCisco ASR 1000 Series Route Processor 1 Features Link LED Carrier LEDLED Label Color -State Behavior DescriptionLabel Type Description Cisco Embedded ASR1000-RP1 for Cisco ASR 1002 Router Boot EUSB0 Flash CarrierCisco ASR 1000 Series Embedded Services Processor 3shows a fully-loaded Cisco ASR 1002 RouterPage Cisco ASR 1000 Series SPA Interface Processor Color Power Up State -Behavior DescriptionStat Status PWR LED Status LEDShared Port Adapters Color-State Behavior DescriptionCisco Embedded ASR1000-SIP10 Interface Subslot Numbering Cisco ASR 1000 Series Router Power Supplies AC and DC Power Supply Types AC and DC System Power RatingsAC Power Supply LEDs and Connector for Cisco ASR Power Supplies for Cisco ASR 1006 RouterDescription Specification 10shows the AC power supplies LEDs and DB-25 alarm connector Color Description Input OKFAN OK DC Power Supply LEDs and Connectors for Cisco ASROutput Fail 910 AC/DC Power System Output for Cisco ASR Power Supplies for Cisco ASR 1004 RouterCisco ASR 1004 AC Power Supply +12 VDC +3.3Cisco ASR 1004 AC Power Supply LEDs and Connector 12 Cisco ASR 1004 Router AC Power Supply13shows the AC power supplies LEDs and DB connector Cisco ASR Router 1004 DC Power Supply Cisco ASR 1004 Router DC Power Supply LEDs and Connector14 Cisco ASR 1004 Router DC Power Supply Voltage Range VDC Minimum Power Supplies for Cisco ASR 1002 RouterDC Power System Input for Cisco ASR MaximumCisco ASR 1002 AC Power Supply LEDs and Connector Cisco ASR 1002 Router AC Power SupplyCisco ASR 1002 Router Power Supply Fans 15 Cisco ASR 1002 Router AC Power Supply Cisco ASR 1002 Router DC Power Supply LEDs and Connector Cisco ASR 1002 Router DC Power SupplyAC Power System Output Voltage Alarm Range for Cisco ASR Minimum Maximum16 Cisco ASR 1002 Router DC Power Supply DC Power System Output for Cisco ASR Minimum 10 a Maximum 39 a 125 aOL-13208-01
Related manuals
Manual 22 pages 55.04 Kb

ASR1000 specifications

The Cisco ASR 1000 Series Aggregation Services Routers are designed to meet the needs of enterprises and service providers seeking high-performance networking solutions. With a combination of scalability, reliability, and security, these routers provide an ideal platform for delivering a wide range of services in a compact form factor.

One of the standout features of the ASR 1000 is its embedded hardware architecture. It utilizes a unique Distributed Services Architecture that allows for greater resource allocation and management, resulting in enhanced performance across various applications. This architecture enables the router to dynamically balance workloads across multiple CPUs, ensuring optimal resource utilization and reducing latency.

The ASR 1000 Series supports a variety of interfaces, including Ethernet, T1/E1, and T3/E3, making it highly versatile for different connectivity options. With support for up to 200 Gbps of throughput, it can handle the growing demands of modern networks, including video conferencing, cloud applications, and data-intensive services.

Security is a paramount feature of the ASR 1000. The routers come equipped with advanced security technologies such as Cisco IOS XE software, which includes built-in encryption and secure access controls. This ensures that data remains protected in transit, allowing organizations to safeguard sensitive information while maintaining compliance with industry regulations.

Another key characteristic of the ASR 1000 is its modularity. Users can easily add or upgrade services through service modules and network interface modules, providing the flexibility needed to adapt to changing network requirements. This modular approach not only helps in managing costs but also extends the life cycle of the hardware.

In terms of manageability, the ASR 1000 Series incorporates Cisco’s Intelligent Network Services, providing comprehensive monitoring and troubleshooting capabilities. This allows network administrators to gain insights into network performance, optimize service delivery, and promptly address any issues that arise.

Finally, the ASR 1000 routers are designed for high availability, featuring redundant power supplies and fans. Coupled with advanced routing protocols and features such as Cisco’s Continuous Availability, the ASR 1000 ensures minimal downtime and uninterrupted service delivery.

In conclusion, the Cisco ASR 1000 Series Aggregation Services Routers combine performance, scalability, security, and manageability, making them an excellent choice for organizations looking to modernize their networking infrastructure while efficiently handling the demands of contemporary applications. Whether for enterprise networks or service provider environments, the ASR 1000 provides a robust and future-proof solution.
Top Page Image Contents