Cisco Systems ASR1000 manual Cisco ASR 1002 Router AC Power Supply

Chapter 2 Cisco ASR 1000 Series Routers Components

Cisco ASR 1000 Series Router Power Supplies

Figure 2-15 Cisco ASR 1002 Router AC Power Supply

1	2	3	4		5	6
		OUTPUT INPUT		FAN		OUTPUT INPUT		FAN
		FAIL	OK	OK		FAIL	OK	OK
0		This unit might have more than				This unit might have more than
		one power supply connection.				one power supply connection.
		All connections must be removed				All connections must be removed
		to de-energize the unit.				to de-energize the unit.

	1	280288
8	7

1	AC power supply ESD socket	5	AC power supply fan
2	AC power supply slot number 0	6	AC power supply captive installation screw
3	AC power supply On (I) /Off (O) switch	7	AC power supply slot number 1
4	AC power supply LEDs	8	AC power supply inlet

Table 2-17describes the AC power supply LEDs on the Cisco ASR 1002 Router.

Table 2-17	Cisco ASR 1002 Router AC Power Supply LEDs
LED Label		LED	Color	Description
INPUT OK		Power supply activity	Green	LED illuminates green to signal that the AC power supply
				input voltage is greater than 85V.
			None	If LED is not illuminated, then the AC input voltage is
				less than 70V or the power supply is turned off. For an AC
				input voltage between 70V and 85V, the INPUT OK LED
				can be either on, off, or flashing
FAN OK		Bi-color LED indicates	Green	LED illuminates green when all fans are operational.
		fan status
			Red	The LED illuminates red when a fan failure is detected.
OUTPUT FAIL		Power supply activity	Red	LED is red and turned off to signal that the AC output
				voltages are within the normal operating range; output
				voltage between the minimum and maximum limits will
				not create an output fail alarm, and output voltages below
				the minimum or above the maximum will create an output
				fail alarm.

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

2-28 OL-13208-01