Cisco Systems ASR1000 manual Cisco ASR 1002 Router AC Power Supply

Page 27

Chapter 2 Cisco ASR 1000 Series Routers Components

Cisco ASR 1000 Series Router Power Supplies

•Cisco ASR 1002 Router DC Power Supply, page 2-29—The DC power supply operates between –40.5VDC and –72VDC.Three-positioneuro-style terminal block, with labeled connections for – (–48/60 V input) and + (–48/60 V Return) and the GND symbol for grounding. The DC input side contains a front panel with provisions for mounting screw, built in handles to remove the power supply, three status LEDs, and fans for power supply and system cooling.

Cisco ASR 1002 Router Power Supply Fans

Cisco ASR 1002 Router system level cooling is provided by two 12 VDC type fans in each power supply module. The fans in each module provide system cooling back-up in the event of a single fan failure. In addition, the fans in each of the power supplies can be powered from a single supply when only one unit is operational. The airflow direction is front to back.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: AC power supplies for the Cisco Aggregation Services Routers: 120 VAC, 20A U.S. maximum. DC power supplies for the Cisco ASR 1006 Router: 50A U.S. maximum; Cisco ASR 1004 Router: 40A U.S. maximum: Cisco ASR 1002 Router: 30A U.S. maximum. Statement 1005

Cisco ASR 1002 Router AC Power Supply

This section provides information about the AC power supplies on the rear of the Cisco ASR 1002 Router.

The Cisco ASR 1002 Router system level cooling is provided by two 12 VDC type fans in each of the two power supply modules. The fans in each module are intended to provide system cooling back-up in the event of a single fan failure. In addition, the fans in each of the power supplies can be powered from a single supply when only one unit is operational. The airflow direction is front to back. A single blind-mate connector located on the inlet side of these modules mates with a connector mounted on back side of the midplane.

Guide pins located at the rear of these modules help center locate the modules and reduce stress to the midplane and module mounted connectors. Two captive screws (tool operated latches) are provided on the modules face plate (chassis rear) to secure these modules into the chassis.

Cisco ASR 1002 AC Power Supply LEDs and Connector

Figure 2-15shows the AC power supplies at the rear of the Cisco ASR 1002 Router. The Cisco

ASR 1002 Router supports up to two power supplies. The power supply LEDs and connectors on the rear of the chassis are described in Table 2-10.

 

 

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

 

 

 

 

 

 

OL-13208-01

 

 

2-27

 

 

 

 

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents A P T E R Cisco ASR 1000 Series Route ProcessorCisco ASR 1000 Series Route Processor 1 Features Carrier LED Link LEDColor -State Behavior Description LED LabelLabel Type Description Cisco Embedded ASR1000-RP1 for Cisco ASR 1002 Router Carrier Boot EUSB0 Flash3shows a fully-loaded Cisco ASR 1002 Router Cisco ASR 1000 Series Embedded Services ProcessorPage Color Power Up State -Behavior Description Cisco ASR 1000 Series SPA Interface ProcessorStat Status Status LED PWR LEDColor-State Behavior Description Shared Port AdaptersCisco Embedded ASR1000-SIP10 Interface Subslot Numbering Cisco ASR 1000 Series Router Power Supplies AC and DC System Power Ratings AC and DC Power Supply TypesPower Supplies for Cisco ASR 1006 Router AC Power Supply LEDs and Connector for Cisco ASRDescription Specification 10shows the AC power supplies LEDs and DB-25 alarm connector Input OK Color DescriptionDC Power Supply LEDs and Connectors for Cisco ASR FAN OKOutput Fail 910 +12 VDC +3.3 Power Supplies for Cisco ASR 1004 RouterCisco ASR 1004 AC Power Supply AC/DC Power System Output for Cisco ASR12 Cisco ASR 1004 Router AC Power Supply Cisco ASR 1004 AC Power Supply LEDs and Connector13shows the AC power supplies LEDs and DB connector Cisco ASR 1004 Router DC Power Supply LEDs and Connector Cisco ASR Router 1004 DC Power Supply14 Cisco ASR 1004 Router DC Power Supply Maximum Power Supplies for Cisco ASR 1002 RouterDC Power System Input for Cisco ASR Voltage Range VDC MinimumCisco ASR 1002 Router AC Power Supply Cisco ASR 1002 AC Power Supply LEDs and ConnectorCisco ASR 1002 Router Power Supply Fans 15 Cisco ASR 1002 Router AC Power Supply Minimum Maximum Cisco ASR 1002 Router DC Power SupplyAC Power System Output Voltage Alarm Range for Cisco ASR Cisco ASR 1002 Router DC Power Supply LEDs and Connector16 Cisco ASR 1002 Router DC Power Supply Minimum 10 a Maximum 39 a 125 a DC Power System Output for Cisco ASROL-13208-01
Related manuals
Manual 22 pages 55.04 Kb
Top Page Image Contents