D-Link DSL-G624T manual Bridged Connection for WAN, WAN Settings Menu Bridge Mode

Page 46

DSL-G624T Wireless A DSL Router User’s Guide

Bridged Connection for WAN

For Bridged connections it will be necessary for most users to install additional software on any computer that will the Router for Internet access. The additional software is used for the purpose of identifying and verifying your account, and then granting Internet access to the computer requesting the connection. The connection software requires the user to enter the User Name and Password for the ISP account. This information is stored on the computer, not in the Router.

Follow the instructions below to configure a Bridged connection for the WAN interface.

To configure a Dynamic IP Address connection, perform the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose. See the table below for a description of all the settings available in this menu.

WAN Settings Menu – Bridge Mode

1.Choose the Bridge Mode option from the WAN Settings pull-down menu.

2.Under the ATM VC Settings at the top of the menu should not be changed unless you have been instructed to change them. However, if you are instructed to change the VPI or VCI values, type in the values assigned for your account. Leave the PVC and Virtual Circuit setting at the default (Pcv0 and Enabled) values for now. This can be used later if you are configuring multiple virtual circuits for your ADSL service. For more information on ATM VC Settings, see the table on page 42 below.

3.Under the Bridge Mode heading, choose the Connection Type from the pull-down menu. This defines both the connection type and encapsulation method used for your ADSL service. The available options are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux.If have not been provided specific information for the Connection Type setting, leave the default setting.

4.Most users will not need to change ATM settings. If this is the first time you are setting up the ADSL connection it is recommended that you leave the Service Category settings at the default values until you have established the connection. See the table on page 41 for a description of the parameters available for ATM traffic shaping.

5.When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.

6.The new settings must be saved and the Router must be restarted for the settings to go into effect. To Save & Reboot the Router, click on the Tools directory tab and then click the Save & Reboot menu button. In the Save and Reboot menu, click the Reboot button under Force the DSL-G624T to system restart. The Router will save the new settings and restart. Upon restarting, the Router will automatically establish the WAN connection.

38

Image 46
Contents DSL-G624T Page Table Of Contents Tools Before You Start Installation OverviewSetup Wizard About This User’s GuideInstallation Requirements Packing ListAdditional Software PasswordWAN Setting UsernameLAN Subnet Mask for LAN IP addresses forDSL-G624T Ethernet NICIntroduction 802.11g WirelessRouter Features Router Description and OperationDSL-G624T Wireless a DSL Router User’s Guide Standards Compatibility and Compliance Front Panel Display Power insert Rear Panel ConnectionsRadio Transmission Wireless LAN BasicsWireless Security RangeAbout 802.11g Wireless Hardware Installation Choosing the Best Location for Wireless OperationWired Network Connections Power on RouterFactory Reset Button Connect Adsl LineHub or Switch to Router Connection Computer to Router ConnectionDSL-G624T Wireless a DSL Router User’s Guide Basic Router Configuration Configuration SummaryConfiguring IP Settings on Your Computer Configure Windows XP for DhcpDSL-G624T Wireless a DSL Router User’s Guide Windows Configure Windows 2000 for DhcpConfigure Windows 95 and Windows 98 for Dhcp Windows 95 and WindowsWindows ME Configure Windows ME for DhcpConfigure Windows NT 4.0 for Dhcp Windows NT 4.0 WorkstationsLogin to Home Access the Configuration ManagerEnter Password Configure the Router Web Manager First Time Log OnUsing the Setup Wizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Wireless Settings menu Wireless LAN SetupHome Configure Basic Wireless Settings Wireless SecuritySecurity Options for Wireless Configure WEP Wireless SecuritySetup Encryption Keys WEP EncryptionConfigure WPA Settings Configure WPA Security for WlanConfigure WPA-PSK Security for Wlan Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN User Name Default RoutePPPoE/PPPoA Parameters Description FirewallWAN Settings for Dynamic IP Address Connection Dynamic IP Address Connection for WANDynamic IP Parameters Description Cloned MAC AddressWAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Static IP Static IP Address for Connection WANSubnet Mask Static IP Parameters DescriptionIP Address Gateway AddressATM Traffic Shaping ATM Settings for WAN connection PPPoE/PPPoA menuService Category ATM QoS Parameters DescriptionATM VC Parameters Description ATM VC SettingsATM VC Settings in WAN connection menu Virtual CircuitLAN IP Settings Configure LAN IP settingsConfigure Dhcp Server settings for the LAN Dhcp Server Settings for the LANUse the Router for Dhcp Dhcp Settings menu with Dhcp disabled Static IP Settings for the LANDisable the Dhcp Server Static IP Assignment for LANDNS Server Settings Configure DNS SettingsDynamic DNS Configuration Dynamic DNSSave Settings and Reboot Save and Reboot menuAdvanced Router Management Enable UPnP Menu UPnPVirtual Server Virtual Server Menu and ListRule Name Rule Management windowParameter Description Private IPLAN Clients LAN Clients windowSnmp Snmp Management windowFilters Filters Configuration MenuSource IP Destination Port Destination IPSource Port ActionBridge Filters Bridge Filters windowRouting Routing TableDMZ IP address configuration DMZFirewall Configuration Menu FirewallRIP Dynamic Routing RIP menuPPP Connection settings menu PPPAdsl Modulation Configuration AdslATM Virtual Circuit configuration menu ATM VCCQoS Configuration screen QoSConfigure Multiple Ssid Wireless ManagementConfigure Wireless Access Control Wireless ManagementWireless Performance Wireless LAN Performance settingsSystem Tools administrative functions ToolsAdministrator Settings change password menu Change System PasswordRemote Web Management and Telnet Access Remote Web And Telnet Access windowTime & Date Configuration TimeRemote Log Settings window Remote LogSave System Settings and Restore Defaults Restore Factory Default SettingsSystem Firmware Upgrade FirmwareMiscellaneous Configuration menu Ping Test MiscellaneousDiagnostics Test Menu TestStatus Information Device Information Display Device Information displayDhcp Clients Dhcp Clients windowLog View Log windowTraffic Adsl Status information Technical Specifications Media Access Protocol Wireless ModulationWireless Data Rates Wireless CertificationIP Setup Example #1 IP Address SetupUsing the Default IP Address Assigning Network IP AddressesIP Setup Example #2 Using DhcpChanging the IP Address of the Router IP Concepts IP AddressesSubnet Mask 255.0.0.0 255.255.0.0 255.255.255.0Micro Filters and Splitters Micro filter InstallationMicro filters Split Line Filter

DSL-G624T, D-Link Wireless ADSL Router specifications

The D-Link Wireless ADSL Router, DSL-G624T, is a versatile and powerful networking solution designed for home and small office environments. This router combines the functionality of ADSL modem capabilities with the convenience of wireless connectivity, making it an ideal choice for users looking to establish a reliable internet connection without the hassle of multiple devices.

One of the primary features of the DSL-G624T is its ADSL2+ support, which allows download speeds of up to 24 Mbps. This high-speed capability ensures that users can surf the web, stream videos, and engage in online gaming with minimal lag and buffering. The built-in ADSL modem means that users can connect directly to their ISP with no need for additional hardware, simplifying setup and reducing clutter.

In terms of wireless technology, the DSL-G624T supports the 802.11g Wi-Fi standard, which offers a maximum theoretical speed of 54 Mbps. This allows for a stable and speedy wireless connection throughout the home or office, supporting multiple users and devices simultaneously. The router also features Wireless Distribution System (WDS) functionality, enabling users to extend the wireless network easily by connecting additional routers or access points.

Security is a crucial aspect of any networking device, and the DSL-G624T does not disappoint. It includes advanced security features such as WPA/WPA2 encryption, ensuring that users' data remains safe from unauthorized access. Additionally, the router supports MAC address filtering and firewall protection, providing an additional layer of defense against potential threats.

The DSL-G624T is equipped with four 10/100 Mbps Ethernet ports, allowing users to connect wired devices such as desktop computers, gaming consoles, or network-attached storage directly to the router. This is particularly useful for systems that require stable connections, such as for gaming or streaming high-definition content.

Installation and management of the DSL-G624T is user-friendly, thanks to its web-based interface. Users can easily configure settings, manage connected devices, and monitor their network's performance. The provision of DHCP support and easy-to-follow wizards streamlines the setup process for users of all technical levels.

In conclusion, the D-Link Wireless ADSL Router, DSL-G624T, combines high-speed ADSL modem capabilities with robust wireless networking features. With its solid performance, essential security measures, and ease of use, this router is a fantastic choice for users looking to enhance their internet connectivity at home or in small office environments.