D-Link DSL-G624T manual Destination IP, Source Port, Destination Port, Action

Page 64

 

 

DSL-G624T Wireless A DSL Router User’s Guide

 

 

 

 

 

 

Where the Destination IP address resides also depends on if you are configuring an

 

Destination IP

Inbound or Outbound filter rule. You can opt to indicate a Mask Range, a Single IP,

 

 

an IP Range or Any IP from the pull-down menu.

 

 

 

 

 

The Source Port is the TCP/UDP port on either the LAN or WAN depending on if you

 

Source Port

are configuring an Outbound or Inbound Filter rule. Select one of the following

 

options from the pull-down menu to define a Any Port, Single Port, Port Range or

 

 

 

 

Safe Range (ports above 1024).

 

 

 

 

 

The Destination Port is the TCP/UDP port on either the LAN or WAN depending on if

 

Destination Port

you are configuring an Outbound or Inbound Filter rule. Select one of the following

 

options from the pull-down menu to define a Any Port, Single Port, Port Range or

 

 

 

 

Safe Range (ports above 1024).

 

 

 

 

Protocol

Select the transport protocol (TCP, UDP or All) that will be used for the filter rule.

 

 

 

 

 

Select to Allow or Deny transport of the data packets according to the criteria

 

Action

defined in the rule. Packets that are allowed are routed to their destination; packets

 

 

that are denied are blocked.

 

 

 

 

Click the Apply button to put the new rule into effect. Any filter rule configured in the menu will appear in the Filters List with the new settings. The Router must save the new settings and reboot before the new rules are applied.

56

Page 63 Page 65
Image 64
Page 63 Page 65
Contents DSL-G624T Page Table Of Contents Tools Installation Overview Setup WizardBefore You Start About This User’s GuideInstallation Requirements Packing ListPassword WAN SettingAdditional Software UsernameLAN IP addresses for DSL-G624TLAN Subnet Mask for Ethernet NIC802.11g Wireless Router FeaturesIntroduction Router Description and OperationDSL-G624T Wireless a DSL Router User’s Guide Standards Compatibility and Compliance Front Panel Display Power insert Rear Panel ConnectionsWireless LAN Basics Wireless SecurityRadio Transmission RangeAbout 802.11g Wireless Hardware Installation Choosing the Best Location for Wireless OperationPower on Router Factory Reset ButtonWired Network Connections Connect Adsl LineHub or Switch to Router Connection Computer to Router ConnectionDSL-G624T Wireless a DSL Router User’s Guide Basic Router Configuration Configuration SummaryConfiguring IP Settings on Your Computer Configure Windows XP for DhcpDSL-G624T Wireless a DSL Router User’s Guide Configure Windows 2000 for Dhcp Configure Windows 95 and Windows 98 for DhcpWindows Windows 95 and WindowsConfigure Windows ME for Dhcp Configure Windows NT 4.0 for DhcpWindows ME Windows NT 4.0 WorkstationsLogin to Home Access the Configuration ManagerEnter Password Configure the Router Web Manager First Time Log OnUsing the Setup Wizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Wireless Settings menu Wireless LAN SetupHome Configure Basic Wireless Settings Wireless SecuritySecurity Options for Wireless Configure WEP Wireless SecuritySetup Encryption Keys WEP EncryptionConfigure WPA Settings Configure WPA Security for WlanConfigure WPA-PSK Security for Wlan Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN Default Route PPPoE/PPPoA Parameters DescriptionUser Name FirewallWAN Settings for Dynamic IP Address Connection Dynamic IP Address Connection for WANDynamic IP Parameters Description Cloned MAC AddressWAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Static IP Static IP Address for Connection WANStatic IP Parameters Description IP AddressSubnet Mask Gateway AddressATM Settings for WAN connection PPPoE/PPPoA menu Service CategoryATM Traffic Shaping ATM QoS Parameters DescriptionATM VC Settings ATM VC Settings in WAN connection menuATM VC Parameters Description Virtual CircuitLAN IP Settings Configure LAN IP settingsConfigure Dhcp Server settings for the LAN Dhcp Server Settings for the LANUse the Router for Dhcp Static IP Settings for the LAN Disable the Dhcp ServerDhcp Settings menu with Dhcp disabled Static IP Assignment for LANDNS Server Settings Configure DNS SettingsDynamic DNS Configuration Dynamic DNSSave Settings and Reboot Save and Reboot menuAdvanced Router Management Enable UPnP Menu UPnPVirtual Server Virtual Server Menu and ListRule Management window Parameter DescriptionRule Name Private IPLAN Clients LAN Clients windowSnmp Snmp Management windowFilters Filters Configuration MenuSource IP Destination IP Source PortDestination Port ActionBridge Filters Bridge Filters windowRouting Routing TableDMZ IP address configuration DMZFirewall Configuration Menu FirewallRIP Dynamic Routing RIP menuPPP Connection settings menu PPPAdsl Modulation Configuration AdslATM Virtual Circuit configuration menu ATM VCCQoS Configuration screen QoSWireless Management Configure Wireless Access ControlConfigure Multiple Ssid Wireless ManagementWireless Performance Wireless LAN Performance settingsSystem Tools administrative functions ToolsChange System Password Remote Web Management and Telnet AccessAdministrator Settings change password menu Remote Web And Telnet Access windowTime & Date Configuration TimeRemote Log Settings window Remote LogSave System Settings and Restore Defaults Restore Factory Default SettingsSystem Firmware Upgrade FirmwareMiscellaneous Configuration menu Ping Test MiscellaneousDiagnostics Test Menu TestStatus Information Device Information Display Device Information displayDhcp Clients Dhcp Clients windowLog View Log windowTraffic Adsl Status information Technical Specifications Wireless Modulation Wireless Data RatesMedia Access Protocol Wireless CertificationIP Address Setup Using the Default IP AddressIP Setup Example #1 Assigning Network IP AddressesIP Setup Example #2 Using DhcpChanging the IP Address of the Router IP Concepts IP AddressesSubnet Mask 255.0.0.0 255.255.0.0 255.255.255.0Micro Filters and Splitters Micro filter InstallationMicro filters Split Line Filter

DSL-G624T, D-Link Wireless ADSL Router specifications

The D-Link Wireless ADSL Router, DSL-G624T, is a versatile and powerful networking solution designed for home and small office environments. This router combines the functionality of ADSL modem capabilities with the convenience of wireless connectivity, making it an ideal choice for users looking to establish a reliable internet connection without the hassle of multiple devices.

One of the primary features of the DSL-G624T is its ADSL2+ support, which allows download speeds of up to 24 Mbps. This high-speed capability ensures that users can surf the web, stream videos, and engage in online gaming with minimal lag and buffering. The built-in ADSL modem means that users can connect directly to their ISP with no need for additional hardware, simplifying setup and reducing clutter.

In terms of wireless technology, the DSL-G624T supports the 802.11g Wi-Fi standard, which offers a maximum theoretical speed of 54 Mbps. This allows for a stable and speedy wireless connection throughout the home or office, supporting multiple users and devices simultaneously. The router also features Wireless Distribution System (WDS) functionality, enabling users to extend the wireless network easily by connecting additional routers or access points.

Security is a crucial aspect of any networking device, and the DSL-G624T does not disappoint. It includes advanced security features such as WPA/WPA2 encryption, ensuring that users' data remains safe from unauthorized access. Additionally, the router supports MAC address filtering and firewall protection, providing an additional layer of defense against potential threats.

The DSL-G624T is equipped with four 10/100 Mbps Ethernet ports, allowing users to connect wired devices such as desktop computers, gaming consoles, or network-attached storage directly to the router. This is particularly useful for systems that require stable connections, such as for gaming or streaming high-definition content.

Installation and management of the DSL-G624T is user-friendly, thanks to its web-based interface. Users can easily configure settings, manage connected devices, and monitor their network's performance. The provision of DHCP support and easy-to-follow wizards streamlines the setup process for users of all technical levels.

In conclusion, the D-Link Wireless ADSL Router, DSL-G624T, combines high-speed ADSL modem capabilities with robust wireless networking features. With its solid performance, essential security measures, and ease of use, this router is a fantastic choice for users looking to enhance their internet connectivity at home or in small office environments.
Top Page Image Contents