D-Link DSL-G624T, D-Link Wireless ADSL Router manual Snmp Management window

Page 62

DSL-G624T Wireless A DSL Router User’s Guide

SNMP

SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the router. SNMP enables network management stations to read and modify the settings of gateways, routers, switches, and other network devices. Use SNMP to configure system features for proper operation, performance monitoring, and detection of potential problems in the Router or network. The DSL-G624T supports SNMP v1 and SNMP v2c.

SNMP Management window

Under SNMP Management, enable or disable SNMP Agent or SNMP Traps by using the check boxes. An SNMP Agent is software that runs locally on the device. A defined set of variables (managed objects) is maintained by the SNMP agent and used to manage the device. Traps are messages that alert network personnel of events that occur on the Switch. The Router generates traps for these events and sends them to the trap recipient (or network manager). In the Name, Location and Contact fields, enter the appropriate information of the Network Administrator. Under Community, enter the name of an SNMP community string that defines the relationship between the SNMP manager and an agent. The community string acts like a password to permit or deny access to an agent on the Router. The defining characteristic associated with the community string is the Access Right. The agent’s access right can be set as either read/write or read-only. Under Traps enter the Destination IP address and Trap Community Name so that the agent will send traps to this management server. The Trap Version can also be set to either SNMP V1 (to specify that SNMP version 1 will be used) or SNMPv2c, which supports both centralized and distributed network management strategies. SNMP V2c includes improvements in the Structure of Management Information (SMI) and adds some security features.

54

Image 62
Contents DSL-G624T Page Table Of Contents Tools Before You Start Installation OverviewSetup Wizard About This User’s GuideInstallation Requirements Packing ListAdditional Software PasswordWAN Setting UsernameLAN Subnet Mask for LAN IP addresses forDSL-G624T Ethernet NICIntroduction 802.11g WirelessRouter Features Router Description and OperationDSL-G624T Wireless a DSL Router User’s Guide Standards Compatibility and Compliance Front Panel Display Power insert Rear Panel ConnectionsRadio Transmission Wireless LAN BasicsWireless Security RangeAbout 802.11g Wireless Hardware Installation Choosing the Best Location for Wireless OperationWired Network Connections Power on RouterFactory Reset Button Connect Adsl LineHub or Switch to Router Connection Computer to Router ConnectionDSL-G624T Wireless a DSL Router User’s Guide Basic Router Configuration Configuration SummaryConfiguring IP Settings on Your Computer Configure Windows XP for DhcpDSL-G624T Wireless a DSL Router User’s Guide Windows Configure Windows 2000 for DhcpConfigure Windows 95 and Windows 98 for Dhcp Windows 95 and WindowsWindows ME Configure Windows ME for DhcpConfigure Windows NT 4.0 for Dhcp Windows NT 4.0 WorkstationsEnter Password Access the Configuration ManagerLogin to Home Configure the Router Web Manager First Time Log OnUsing the Setup Wizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Home Wireless LAN SetupWireless Settings menu Configure Basic Wireless Settings Wireless SecuritySecurity Options for Wireless Configure WEP Wireless SecuritySetup Encryption Keys WEP EncryptionConfigure WPA Settings Configure WPA Security for WlanConfigure WPA-PSK Security for Wlan Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN User Name Default RoutePPPoE/PPPoA Parameters Description FirewallWAN Settings for Dynamic IP Address Connection Dynamic IP Address Connection for WANDynamic IP Parameters Description Cloned MAC AddressWAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Static IP Static IP Address for Connection WANSubnet Mask Static IP Parameters DescriptionIP Address Gateway AddressATM Traffic Shaping ATM Settings for WAN connection PPPoE/PPPoA menuService Category ATM QoS Parameters DescriptionATM VC Parameters Description ATM VC SettingsATM VC Settings in WAN connection menu Virtual CircuitLAN IP Settings Configure LAN IP settingsUse the Router for Dhcp Dhcp Server Settings for the LANConfigure Dhcp Server settings for the LAN Dhcp Settings menu with Dhcp disabled Static IP Settings for the LANDisable the Dhcp Server Static IP Assignment for LANDNS Server Settings Configure DNS SettingsDynamic DNS Configuration Dynamic DNSSave Settings and Reboot Save and Reboot menuAdvanced Router Management Enable UPnP Menu UPnPVirtual Server Virtual Server Menu and ListRule Name Rule Management windowParameter Description Private IPLAN Clients LAN Clients windowSnmp Snmp Management windowSource IP Filters Configuration MenuFilters Destination Port Destination IPSource Port ActionBridge Filters Bridge Filters windowRouting Routing TableDMZ IP address configuration DMZFirewall Configuration Menu FirewallRIP Dynamic Routing RIP menuPPP Connection settings menu PPPAdsl Modulation Configuration AdslATM Virtual Circuit configuration menu ATM VCCQoS Configuration screen QoSConfigure Multiple Ssid Wireless ManagementConfigure Wireless Access Control Wireless ManagementWireless Performance Wireless LAN Performance settingsSystem Tools administrative functions ToolsAdministrator Settings change password menu Change System PasswordRemote Web Management and Telnet Access Remote Web And Telnet Access windowTime & Date Configuration TimeRemote Log Settings window Remote LogSystem Restore Factory Default SettingsSave System Settings and Restore Defaults Firmware Upgrade FirmwareMiscellaneous Configuration menu Ping Test MiscellaneousDiagnostics Test Menu TestStatus Information Device Information Display Device Information displayDhcp Clients Dhcp Clients windowLog View Log windowTraffic Adsl Status information Technical Specifications Media Access Protocol Wireless ModulationWireless Data Rates Wireless CertificationIP Setup Example #1 IP Address SetupUsing the Default IP Address Assigning Network IP AddressesChanging the IP Address of the Router Using DhcpIP Setup Example #2 IP Concepts IP AddressesSubnet Mask 255.0.0.0 255.255.0.0 255.255.255.0Micro filters Micro filter InstallationMicro Filters and Splitters Split Line Filter

DSL-G624T, D-Link Wireless ADSL Router specifications

The D-Link Wireless ADSL Router, DSL-G624T, is a versatile and powerful networking solution designed for home and small office environments. This router combines the functionality of ADSL modem capabilities with the convenience of wireless connectivity, making it an ideal choice for users looking to establish a reliable internet connection without the hassle of multiple devices.

One of the primary features of the DSL-G624T is its ADSL2+ support, which allows download speeds of up to 24 Mbps. This high-speed capability ensures that users can surf the web, stream videos, and engage in online gaming with minimal lag and buffering. The built-in ADSL modem means that users can connect directly to their ISP with no need for additional hardware, simplifying setup and reducing clutter.

In terms of wireless technology, the DSL-G624T supports the 802.11g Wi-Fi standard, which offers a maximum theoretical speed of 54 Mbps. This allows for a stable and speedy wireless connection throughout the home or office, supporting multiple users and devices simultaneously. The router also features Wireless Distribution System (WDS) functionality, enabling users to extend the wireless network easily by connecting additional routers or access points.

Security is a crucial aspect of any networking device, and the DSL-G624T does not disappoint. It includes advanced security features such as WPA/WPA2 encryption, ensuring that users' data remains safe from unauthorized access. Additionally, the router supports MAC address filtering and firewall protection, providing an additional layer of defense against potential threats.

The DSL-G624T is equipped with four 10/100 Mbps Ethernet ports, allowing users to connect wired devices such as desktop computers, gaming consoles, or network-attached storage directly to the router. This is particularly useful for systems that require stable connections, such as for gaming or streaming high-definition content.

Installation and management of the DSL-G624T is user-friendly, thanks to its web-based interface. Users can easily configure settings, manage connected devices, and monitor their network's performance. The provision of DHCP support and easy-to-follow wizards streamlines the setup process for users of all technical levels.

In conclusion, the D-Link Wireless ADSL Router, DSL-G624T, combines high-speed ADSL modem capabilities with robust wireless networking features. With its solid performance, essential security measures, and ease of use, this router is a fantastic choice for users looking to enhance their internet connectivity at home or in small office environments.