D-Link DSL-G624T manual ATM VC Settings in WAN connection menu, ATM VC Parameters Description

Page 50

DSL-G624T Wireless A DSL Router User’s Guide

ATM VC Settings

ATM VC settings can be configured for all connection types in the WAN configuration menu of the Home directory.

ATM VC Settings in WAN connection menu

The table below describes the ATM VC settings used to configure a PPPoE or PPPoA connection for an ADSL account.

 

ATM VC Parameters

Description

 

 

 

 

 

 

 

The Router supports using up to eight multiple virtual connections. This

 

 

 

menu allows the user to configure WAN settings for all the available

 

 

PVC

connections (see instructions below on how to set up Multiple Virtual

 

 

Connections). Use the PVC menu to select the connection (Pvc0 to Pvc7)

 

 

 

you want to configure. Since most users will use only a single connection,

 

 

 

the default setting Pvc0 can be used for any changes made to the WAN

 

 

 

settings.

 

 

VPI

The Virtual Path Identifier is used with the VCI to define a dedicated circuit

 

 

on the ATM network portion of the connection to the Internet and WAN.

 

 

 

Most users will not need to change this setting.

 

 

VCI

The Virtual Channel Identifier is used with the VPI to define a dedicated

 

 

circuit on the ATM network portion of the connection to the Internet and

 

 

 

WAN. Most users will not need to change this setting.

 

 

 

As with the PVC setting, this is mainly for use by clients who are configuring

 

 

Virtual Circuit

the Router for multiple virtual connections. Use this to enable or disable the

 

 

PVC you are currently configuring. By default, the Pvc0 is enabled and the

 

 

 

 

 

 

remaining PVCs are disabled.

 

 

WAN Setting

Use this to change the type of connection used. The options are:

 

 

PPPoE/PPPoA, Dynamic IP Address, Static IP Address and Bridge Mode.

 

 

 

Each option will offer a different settings for configuration.

 

42

Image 50
Contents DSL-G624T Page Table Of Contents Tools Before You Start Installation OverviewSetup Wizard About This User’s GuideInstallation Requirements Packing ListAdditional Software PasswordWAN Setting UsernameLAN Subnet Mask for LAN IP addresses forDSL-G624T Ethernet NICIntroduction 802.11g WirelessRouter Features Router Description and OperationDSL-G624T Wireless a DSL Router User’s Guide Standards Compatibility and Compliance Front Panel Display Power insert Rear Panel ConnectionsRadio Transmission Wireless LAN BasicsWireless Security RangeAbout 802.11g Wireless Hardware Installation Choosing the Best Location for Wireless OperationWired Network Connections Power on RouterFactory Reset Button Connect Adsl LineHub or Switch to Router Connection Computer to Router ConnectionDSL-G624T Wireless a DSL Router User’s Guide Basic Router Configuration Configuration SummaryConfiguring IP Settings on Your Computer Configure Windows XP for DhcpDSL-G624T Wireless a DSL Router User’s Guide Windows Configure Windows 2000 for DhcpConfigure Windows 95 and Windows 98 for Dhcp Windows 95 and WindowsWindows ME Configure Windows ME for DhcpConfigure Windows NT 4.0 for Dhcp Windows NT 4.0 WorkstationsEnter Password Access the Configuration ManagerLogin to Home Configure the Router Web Manager First Time Log OnUsing the Setup Wizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Home Wireless LAN SetupWireless Settings menu Configure Basic Wireless Settings Wireless SecuritySecurity Options for Wireless Configure WEP Wireless SecuritySetup Encryption Keys WEP EncryptionConfigure WPA Settings Configure WPA Security for WlanConfigure WPA-PSK Security for Wlan Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN User Name Default RoutePPPoE/PPPoA Parameters Description FirewallWAN Settings for Dynamic IP Address Connection Dynamic IP Address Connection for WANDynamic IP Parameters Description Cloned MAC AddressWAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Static IP Static IP Address for Connection WANSubnet Mask Static IP Parameters DescriptionIP Address Gateway AddressATM Traffic Shaping ATM Settings for WAN connection PPPoE/PPPoA menuService Category ATM QoS Parameters DescriptionATM VC Parameters Description ATM VC SettingsATM VC Settings in WAN connection menu Virtual CircuitLAN IP Settings Configure LAN IP settingsUse the Router for Dhcp Dhcp Server Settings for the LANConfigure Dhcp Server settings for the LAN Dhcp Settings menu with Dhcp disabled Static IP Settings for the LANDisable the Dhcp Server Static IP Assignment for LANDNS Server Settings Configure DNS SettingsDynamic DNS Configuration Dynamic DNSSave Settings and Reboot Save and Reboot menuAdvanced Router Management Enable UPnP Menu UPnPVirtual Server Virtual Server Menu and ListRule Name Rule Management windowParameter Description Private IPLAN Clients LAN Clients windowSnmp Snmp Management windowSource IP Filters Configuration MenuFilters Destination Port Destination IPSource Port ActionBridge Filters Bridge Filters windowRouting Routing TableDMZ IP address configuration DMZFirewall Configuration Menu FirewallRIP Dynamic Routing RIP menuPPP Connection settings menu PPPAdsl Modulation Configuration AdslATM Virtual Circuit configuration menu ATM VCCQoS Configuration screen QoSConfigure Multiple Ssid Wireless ManagementConfigure Wireless Access Control Wireless ManagementWireless Performance Wireless LAN Performance settingsSystem Tools administrative functions ToolsAdministrator Settings change password menu Change System PasswordRemote Web Management and Telnet Access Remote Web And Telnet Access windowTime & Date Configuration TimeRemote Log Settings window Remote LogSystem Restore Factory Default SettingsSave System Settings and Restore Defaults Firmware Upgrade FirmwareMiscellaneous Configuration menu Ping Test MiscellaneousDiagnostics Test Menu TestStatus Information Device Information Display Device Information displayDhcp Clients Dhcp Clients windowLog View Log windowTraffic Adsl Status information Technical Specifications Media Access Protocol Wireless ModulationWireless Data Rates Wireless CertificationIP Setup Example #1 IP Address SetupUsing the Default IP Address Assigning Network IP AddressesChanging the IP Address of the Router Using DhcpIP Setup Example #2 IP Concepts IP AddressesSubnet Mask 255.0.0.0 255.255.0.0 255.255.255.0Micro filters Micro filter InstallationMicro Filters and Splitters Split Line Filter

DSL-G624T, D-Link Wireless ADSL Router specifications

The D-Link Wireless ADSL Router, DSL-G624T, is a versatile and powerful networking solution designed for home and small office environments. This router combines the functionality of ADSL modem capabilities with the convenience of wireless connectivity, making it an ideal choice for users looking to establish a reliable internet connection without the hassle of multiple devices.

One of the primary features of the DSL-G624T is its ADSL2+ support, which allows download speeds of up to 24 Mbps. This high-speed capability ensures that users can surf the web, stream videos, and engage in online gaming with minimal lag and buffering. The built-in ADSL modem means that users can connect directly to their ISP with no need for additional hardware, simplifying setup and reducing clutter.

In terms of wireless technology, the DSL-G624T supports the 802.11g Wi-Fi standard, which offers a maximum theoretical speed of 54 Mbps. This allows for a stable and speedy wireless connection throughout the home or office, supporting multiple users and devices simultaneously. The router also features Wireless Distribution System (WDS) functionality, enabling users to extend the wireless network easily by connecting additional routers or access points.

Security is a crucial aspect of any networking device, and the DSL-G624T does not disappoint. It includes advanced security features such as WPA/WPA2 encryption, ensuring that users' data remains safe from unauthorized access. Additionally, the router supports MAC address filtering and firewall protection, providing an additional layer of defense against potential threats.

The DSL-G624T is equipped with four 10/100 Mbps Ethernet ports, allowing users to connect wired devices such as desktop computers, gaming consoles, or network-attached storage directly to the router. This is particularly useful for systems that require stable connections, such as for gaming or streaming high-definition content.

Installation and management of the DSL-G624T is user-friendly, thanks to its web-based interface. Users can easily configure settings, manage connected devices, and monitor their network's performance. The provision of DHCP support and easy-to-follow wizards streamlines the setup process for users of all technical levels.

In conclusion, the D-Link Wireless ADSL Router, DSL-G624T, combines high-speed ADSL modem capabilities with robust wireless networking features. With its solid performance, essential security measures, and ease of use, this router is a fantastic choice for users looking to enhance their internet connectivity at home or in small office environments.