D-Link DSL-G624T LAN IP addresses for, LAN Subnet Mask for, Ethernet NIC, Dhcp Client status

Page 8

DSL-G624T Wireless A DSL Router User’s Guide

The Setup Wizard can be used to configure the Internet connection for most users. If you are

using a PPPoE or PPPoA type connection use the Setup Wizard to establish the Internet

Note connection.

Information you will need about your DSL-G624T ADSL Router:

 

This is the Username needed access the Router’s

Record info here

Username

management interface. When you attempt to connect to

 

the device through a web browser you will be prompted

 

 

to enter this Username. The default Username for the

 

 

Router is admin. The user cannot change this.

 

 

 

 

 

This is the Password you will be prompted to enter

 

Password

when you access the Router’s management interface.

 

The default Password is admin. The user may change

 

 

 

 

this.

 

 

 

 

 

This is the IP address you will enter into the Address

 

 

field of your web browser to access the Router’s

 

 

configuration graphical user interface (GUI) using a

 

LAN IP addresses for

web browser. The default IP address is 192.168.1.1.

 

the DSL-G624T

This may be changed to suit any IP address scheme

 

 

the user desires. This address will be the base IP

 

 

address used for DHCP service on the LAN when

 

 

DHCP is enabled.

 

 

 

 

LAN Subnet Mask for

This is the subnet mask used by the DSL-G624T, and

 

will be used throughout your LAN. The default subnet

 

the DSL-G624T

 

mask is 255.255.255.0. This can be changed later.

 

 

 

 

 

 

Information you will need about your LAN or computer:

 

If your computer has an Ethernet NIC, you can

Record info here

 

connect the DSL-G624T to this Ethernet port using an

 

Ethernet NIC

Ethernet cable. You can also use the Ethernet ports

 

 

on the DSL-G624T to connect to other computer or

 

 

Ethernet devices.

 

 

 

 

 

Your DSL-G624T ADSL Router is configured, by

 

 

default, to be a DHCP server. This means that it can

 

 

assign an IP address, subnet mask, and a default

 

DHCP Client status

gateway address to computers on your LAN. The

 

default range of IP addresses the DSL-G624T will

 

 

assign are from 192.168.1.2 to 192.168.1.254. Your

 

 

computer (or computers) needs to be configured to

 

 

Obtain an IP address automatically (that is, they

 

 

need to be configured as DHCP clients.)

 

 

 

 

It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future.

Once you have the above information, you are ready to setup and configure your DSL-G624T ADSL Router.

vi

Image 8
Contents DSL-G624T Page Table Of Contents Tools Installation Overview Setup WizardBefore You Start About This User’s GuideInstallation Requirements Packing ListPassword WAN SettingAdditional Software UsernameLAN IP addresses for DSL-G624TLAN Subnet Mask for Ethernet NIC802.11g Wireless Router FeaturesIntroduction Router Description and OperationDSL-G624T Wireless a DSL Router User’s Guide Standards Compatibility and Compliance Front Panel Display Power insert Rear Panel ConnectionsWireless LAN Basics Wireless SecurityRadio Transmission RangeAbout 802.11g Wireless Hardware Installation Choosing the Best Location for Wireless OperationPower on Router Factory Reset ButtonWired Network Connections Connect Adsl LineHub or Switch to Router Connection Computer to Router ConnectionDSL-G624T Wireless a DSL Router User’s Guide Basic Router Configuration Configuration SummaryConfiguring IP Settings on Your Computer Configure Windows XP for DhcpDSL-G624T Wireless a DSL Router User’s Guide Configure Windows 2000 for Dhcp Configure Windows 95 and Windows 98 for DhcpWindows Windows 95 and WindowsConfigure Windows ME for Dhcp Configure Windows NT 4.0 for DhcpWindows ME Windows NT 4.0 WorkstationsEnter Password Access the Configuration ManagerLogin to Home Configure the Router Web Manager First Time Log OnUsing the Setup Wizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Home Wireless LAN SetupWireless Settings menu Configure Basic Wireless Settings Wireless SecuritySecurity Options for Wireless Configure WEP Wireless SecuritySetup Encryption Keys WEP EncryptionConfigure WPA Settings Configure WPA Security for WlanConfigure WPA-PSK Security for Wlan Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN Default Route PPPoE/PPPoA Parameters DescriptionUser Name FirewallWAN Settings for Dynamic IP Address Connection Dynamic IP Address Connection for WANDynamic IP Parameters Description Cloned MAC AddressWAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Static IP Static IP Address for Connection WANStatic IP Parameters Description IP AddressSubnet Mask Gateway AddressATM Settings for WAN connection PPPoE/PPPoA menu Service CategoryATM Traffic Shaping ATM QoS Parameters DescriptionATM VC Settings ATM VC Settings in WAN connection menuATM VC Parameters Description Virtual CircuitLAN IP Settings Configure LAN IP settingsUse the Router for Dhcp Dhcp Server Settings for the LANConfigure Dhcp Server settings for the LAN Static IP Settings for the LAN Disable the Dhcp ServerDhcp Settings menu with Dhcp disabled Static IP Assignment for LANDNS Server Settings Configure DNS SettingsDynamic DNS Configuration Dynamic DNSSave Settings and Reboot Save and Reboot menuAdvanced Router Management Enable UPnP Menu UPnPVirtual Server Virtual Server Menu and ListRule Management window Parameter DescriptionRule Name Private IPLAN Clients LAN Clients windowSnmp Snmp Management windowSource IP Filters Configuration MenuFilters Destination IP Source PortDestination Port ActionBridge Filters Bridge Filters windowRouting Routing TableDMZ IP address configuration DMZFirewall Configuration Menu FirewallRIP Dynamic Routing RIP menuPPP Connection settings menu PPPAdsl Modulation Configuration AdslATM Virtual Circuit configuration menu ATM VCCQoS Configuration screen QoSWireless Management Configure Wireless Access ControlConfigure Multiple Ssid Wireless ManagementWireless Performance Wireless LAN Performance settingsSystem Tools administrative functions ToolsChange System Password Remote Web Management and Telnet AccessAdministrator Settings change password menu Remote Web And Telnet Access windowTime & Date Configuration TimeRemote Log Settings window Remote LogSystem Restore Factory Default SettingsSave System Settings and Restore Defaults Firmware Upgrade FirmwareMiscellaneous Configuration menu Ping Test MiscellaneousDiagnostics Test Menu TestStatus Information Device Information Display Device Information displayDhcp Clients Dhcp Clients windowLog View Log windowTraffic Adsl Status information Technical Specifications Wireless Modulation Wireless Data RatesMedia Access Protocol Wireless CertificationIP Address Setup Using the Default IP AddressIP Setup Example #1 Assigning Network IP AddressesChanging the IP Address of the Router Using DhcpIP Setup Example #2 IP Concepts IP AddressesSubnet Mask 255.0.0.0 255.255.0.0 255.255.255.0Micro filters Micro filter InstallationMicro Filters and Splitters Split Line Filter

DSL-G624T, D-Link Wireless ADSL Router specifications

The D-Link Wireless ADSL Router, DSL-G624T, is a versatile and powerful networking solution designed for home and small office environments. This router combines the functionality of ADSL modem capabilities with the convenience of wireless connectivity, making it an ideal choice for users looking to establish a reliable internet connection without the hassle of multiple devices.

One of the primary features of the DSL-G624T is its ADSL2+ support, which allows download speeds of up to 24 Mbps. This high-speed capability ensures that users can surf the web, stream videos, and engage in online gaming with minimal lag and buffering. The built-in ADSL modem means that users can connect directly to their ISP with no need for additional hardware, simplifying setup and reducing clutter.

In terms of wireless technology, the DSL-G624T supports the 802.11g Wi-Fi standard, which offers a maximum theoretical speed of 54 Mbps. This allows for a stable and speedy wireless connection throughout the home or office, supporting multiple users and devices simultaneously. The router also features Wireless Distribution System (WDS) functionality, enabling users to extend the wireless network easily by connecting additional routers or access points.

Security is a crucial aspect of any networking device, and the DSL-G624T does not disappoint. It includes advanced security features such as WPA/WPA2 encryption, ensuring that users' data remains safe from unauthorized access. Additionally, the router supports MAC address filtering and firewall protection, providing an additional layer of defense against potential threats.

The DSL-G624T is equipped with four 10/100 Mbps Ethernet ports, allowing users to connect wired devices such as desktop computers, gaming consoles, or network-attached storage directly to the router. This is particularly useful for systems that require stable connections, such as for gaming or streaming high-definition content.

Installation and management of the DSL-G624T is user-friendly, thanks to its web-based interface. Users can easily configure settings, manage connected devices, and monitor their network's performance. The provision of DHCP support and easy-to-follow wizards streamlines the setup process for users of all technical levels.

In conclusion, the D-Link Wireless ADSL Router, DSL-G624T, combines high-speed ADSL modem capabilities with robust wireless networking features. With its solid performance, essential security measures, and ease of use, this router is a fantastic choice for users looking to enhance their internet connectivity at home or in small office environments.